A model for crack formation during active solid pyrolysis of a char-forming solid: crack patterns; surface area generation; volatile mass efflux

A model is developed for the formation and propagation of cracks in a material sample that is heated at its top surface, pyrolyses, and then thermally degrades to form char. In this work the sample is heated uniformly over its entire top surface by a hypothetical flame (a heat source). The pyrolysis mechanism is described by a one-step overall reaction that is dependent nonlinearly on the temperature (Arrhenius form). Stresses develop in response to the thermal degradation of the material by means of a shrinkage strain caused by local mass loss during pyrolysis. When the principal stress exceeds a prescribed threshold value, the material forms a local crack. Cracks are found to generally originate at the surface in response to heating, but occasionally they form in the bulk, away from ever-changing material boundaries. The resulting cracks evolve and form patterns whose characteristics are described. Quantities examined in detail are: the crack spacing in the pyrolysis zone; the crack length evolution; the formation and nature of crack loops which are defined as individual cracks that have joined to form loops that are disconnected from the remaining material; the formation of enhanced pyrolysis area; and the impact of all of the former quantities on mass flux. It is determined that the mass flux from the sample can be greatly enhanced over its nominal (non-cracking) counterpart. The mass efflux profile qualitatively resembles those observed in Cone Calorimeter tests.     

Norbornene derivatives from a metal‐free,strain‐promoted cycloaddition reaction: New building blocks for ring‐opening metathesis polymerization reactions

The preparation of new ring opening metathesis polymerization (ROMP) monomers using a 1,3‐dipolar cycloaddition between aryl azides and norbornadiene is described. Various norbornenetriazolines, obtained through a solvent‐and catalyst‐free reaction, can subsequently be incorporated into polymer backbones through ROMP reactions. Furthermore, thermal decomposition of the triazoline moiety can allow for further polymer functionalization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2357–2362     

Prasad L. Polavarapu (Ed.): Chiral analysis: advances in spectroscopy,chromatography, and emerging methods, 2nd ed.

Analytical and Bioanalytical Chemistry -     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Diastereoselective Cyclobutenol Synthesis: A Heterogeneous Palladium-Catalyzed Oxidative Carbocyclization-Borylation of Enallenols

A highly selective and efficient oxidative carbocyclization/borylation of enallenols catalyzed by palladium immobilized on amino-functionalized siliceous mesocellular foam (Pd-AmP-MCF) was developed for diastereoselective cyclobutenol synthesis. The heterogeneous palladium catalyst can be recovered and recycled without any observed loss of activity or selectivity. The high diastereoselectivity of the reaction is proposed to originate from a directing effect of the enallenol hydroxyl group. Optically pure cyclobutenol synthesis was achieved by the heterogeneous strategy by using chiral enallenol obtained from kinetic resolution.     

Total Electron Content Measurements in the Ionosphere Disturbed by High-Power High-Frequency Waves by the Methods of Incoherent Scattering of Radio Waves and Radio Sounding by Glonass Satellite Signal

Radiophysics and Quantum Electronics - We present the results of comparing the total electron content measurements based on GLONASS satellite signals and the EISCAT UHF incoherent scatter radar...     

Eye-safe compact scanning LIDAR technology

A 1.5-μm eye-safe, 3-D scanning, and compact Mie LIght Detection and Ranging (LIDAR) is presented. The transmitter of the LIDAR is based on a KTA optical parameter oscillator (OPO) resonator. For detecting return signals, an InGaAs APD is used. The all solid-state OPO laser transmitter has the feature of small volume and lightweight, which allows a 165-lb compact eye-safe scanning LIDAR to be constructed. A system simulation using our own model was conducted to direct the system development. A method to solve the problem with small active area APD detectors was developed and described. The preliminary field-test measurement results indicated that the LIDAR has the capability to detect aerosols and clouds in lower atmospheres up to three dimensions.     

A dual graph-norm refinement indicator for finite volume approximations of the Euler equations

Summary. We generalise and apply a refinement indicator of the type originally designed by Mackenzie, Süli and Warnecke in [15] and [16] for linear Friedrichs systems to the Euler equations of inviscid, compressible fluid flow. The Euler equations are symmetrized by means of entropy variables and locally linearized about a constant state to obtain a symmetric hyperbolic system to which an a posteriori error analysis of the type introduced in [15] can be applied. We discuss the details of the implementation of the refinement indicator into the DLR--Code which is based on a finite volume method of box type on an unstructured grid and present numerical results. Received May 15, 1995 / Revised version received April 17, 1996     

Donor-acceptor complexes of quinoline N-oxides with boron trifluoride

Molecular n-v complexes of quinoline N-oxides with BF₃ have been studied by electronic and IR spectroscopy. In most case the donor centre is the oxygen atom of the N-oxide group.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1087–1092, August, 1994.