Bromination of sydnones. III. Bromination of 3-(2-substituted-phenyl)sydnones and subsequent side chain modification

Bromination of the sydnone ring of several ortho-substituted N-arylsydnones is reported. Subsequent side-chain modification generally can be achieved without concomitant removal of the 4-bromo protective group.     

Asymmetric allylboration of alpha,beta-enals as a surrogate for the enantioselective synthesis of allylic amines and alpha-amino acids

[reaction: see text] Optically pure allylic amines have been synthesized from alpha,beta-unsaturated aldehydes via allylboration with (-)-B-allyldiisopinocampheylborane, followed by Overman rearrangement. By incorporating crotyl and alkoxyallylboration, functionalization at delta-position was readily accomplished. By applying this methodology, the synthesis of several chiral alpha-amino acids has been achieved.     

A comparison of sequential extraction techniques for determining arsenic fractionation in synthetic mineral mixtures

The sequential extraction methods according to Tessier et al. [1], Borovec et al. [2], Zhang and Moore [3] and Hall et al. [4] have been tested for their suitability for arsenic fractionation in samples of artificially prepared mineral mixtures. Mixtures containing different amounts of As-containing phases were prepared so that their compositions corresponded to weathering products on As-bearing ore deposits. A comparison of different procedures on simple mineral mixtures containing calcium arsenate (CaHAsO₄·H₂O), As-bearing goethite (FeOOH) and arsenopyrite (FeAsS) showed that only the results of the Hall method satisfactorily correspond to the expected arsenic distribution. A detailed verification of the Hall method was subsequently carried out on most complex synthetic mineral mixtures with varying amounts of As-containing kaolinite and carbonate, calcium arsenate, As-bearing goethite and arsenopyrite. The results confirm that the Hall method cannot be fully employed for an accurate As speciation but may be applied for a route identification of As distribution between "labile", "medium-labile" and "residual" forms in heavily polluted soils.     

S-(2-Pyrimidinyl)- and S-(2-(4,6-dimethylpyrimidinyl))-1,1,3,3-tetramethylthiouronium hexafluorophosphates: novel reagents for in situ peptide coupling

Two new reagents for in situ peptide coupling based on the 2-mercaptopyrimidine core have been developed. The readily prepared thiouronium salts were found to promote both peptide and segment coupling efficiently with low racemization/epimerization levels.     

Determination of the antifouling agent zinc pyrithione in water samples by copper chelate formation and high-performance liquid chromatography-atmospheric pressure chemical ionisation mass spectrometry

Zinc pyrithione has recently been incorporated into antifouling paints as a booster biocide, which is slowly released into the water as the paint ages. In order to determine concentrations of zinc pyrithione (ZPT) in aqueous samples, a liquid chromatographic method has been developed. Since ZPT interacts with certain reversed-phase packing materials or stainless steel components of the HPLC system, the method uses transchelation of the ZPT into the stable copper(II) complex before analysis by liquid chromatography coupled to atmospheric pressure chemical ionisation mass spectrometry. ZPT was extracted as copper pyrithione using dichloromethane with adequate recovery (77% +/- 17%, n = 6) from 2-l water samples. The limit of detection was calculated to be 20 ng/l, using selected ion monitoring. The analysis of samples collected from various UK marinas showed no detectable concentrations to be present, whilst a laboratory-based study confirmed that this is probably due to the rapid photodegradation of ZPT in seawater.     

Chlorobiphenyls in sewage sludge; comparison of extraction methods

Six extraction methods for the analysis of PCBs (CB-28, CB-52, CB-101, CB-118, CB-138, CB-153 and CB-180) in sewage sludge were tested. A certified reference material (CRM 392) was used for the evaluation of the performance of the methods. Soxhlet-Dean-Starch with toluene as solvent, Soxhlet with hexane:acetone (2:3), cold digestion/saponification with 2 mol/L KOH in methanol followed by partition with hexane, and sonicated liquid-solid extraction with hexane:acetone (1:1) produced accurate results (97%, 93%, 104%, and 88%, respectively) with acceptable precisions (6.2%, 6.8%, 15% and 12%, respectively). Results in close agreement with the certified value for all congeners were obtained by treatment with BF₃-methanol prior to partition with dichloromethane. However, this is a tedious procedure and involves the use of hazardous compounds. Cyclic steam distillation produced results with an accuracy of around 80% and a good precision (5.2%). The very low consumption of solvents and other expensive chemicals by this technique and the possibility of analyzing the extract directly without clean-up make it an interesting alternative to the more sophisticated methods. Column elution with dichloromethane was found to be less efficient (61%), but it is a rapid, direct method with a low consumption of solvents and it may therefore serve as screening method. Received: 29 April 1997 / Revised: 30 July 1997 / Accepted: 6 August 1997     

Analysis of serotonin release from single neuron soma using capillary electrophoresis and laser-induced fluorescence with a pulsed deep-UV NeCu laser

The use of capillary electrophoresis (CE) with laser-induced fluorescence excited by ultraviolet (UV) lasers in the range 200–300 nm has been restricted by the available wavelengths and expense of UV lasers. The integration of a NeCu deep UV laser operating at 248.6 nm with a single channel CE system with post-column sheath flow detection allows detection limits for serotonin and tryptophan of 3.9×10^-8 M and 4.5×10^-8 M respectively. Single cell analysis of serotonergic metacerebral cells from the sea slug Aplysia californica yields a value of 800±85 fmol of serotonin in each cell soma. For the first time, serotonin is directly detected in electrically stimulated release from single metacerebral cell soma, with approximately 4% of the serotonin contained in the soma released from a semi-intact preparation with a 2 min electrical stimulation.     

Effect of phase ratio on van't Hoff analysis in reversed-phase liquid chromatography,and phase-ratio-independent estimation of transfer enthalpy

In analysis of the thermodynamics of the transfer of a solute from the mobile phase to the stationary phase in reversed-phase liquid chromatography, it is nearly always assumed that the phase ratio is constant. This type of analysis is typically performed by applying a form of the van't Hoff equation, which relates the retention factor to temperature via the enthalpy and entropy of transfer. When non-linear van't Hoff plots are observed, it is often assumed that the enthalpy and entropy of transfer change with temperature. However, when the possibility of a change in the phase ratio is considered, it becomes apparent that non-linear van't Hoff behavior may or may not be due to changes in enthalpy or entropy. In this work, we present mathematical evidence that phase ratio changes, if they occur, can cause deviations from linearity in a van't Hoff plot. We also show that the phase ratio influence can be eliminated by considering the molecular difference between two solutes instead of the solutes themselves. The resulting selectivity van't Hoff plots may be linear, even when the van't Hoff plots of the two solutes are non-linear. In such cases, temperature-dependent phase ratio changes, and not necessarily changes in the transfer enthalpy, may be responsible for the curved van't Hoff plots of the individual solutes. In addition, we present chromatographic evidence that different solutes may "see" different thermodynamic phase ratios. It is clear that the concept of a phase ratio in reversed-phase chromatography is not nearly as well defined as a phase ratio in a bulk system like a liquid-liquid extraction.     

Spectroscopy of hydrothermal reactions, 19: pH and salt dependence of decarboxylation of α‐alanine at 280–330°C in an FT‐IR spectroscopy flow reactor

The spontaneous decarboxylation of 0.5 m aqueous α‐alanine solutions as a function of pH (1–9 at 320°C, where neutrality is approximately 6) was determined with a flow reactor at 280–330°C and 275 bar by FT‐IR spectroscopy. The kinetics for the cationic and anionic forms have not been previously reported. The rate constants for the cationic form [CH₃(NH₃⁺)CHCO₂H], the anionic form [CH₃(NH₂)CHCO₂^?], and the zwitterion form [CH₃(NH₃⁺)CHCO₂^?] were obtained and followed the first‐order rate law. The rate of decarboxylation of the zwitterion is three times greater than that of the cationic and anionic forms in the temperature and pH ranges of study. The corresponding Arrhenius parameters were determined and compared with previously reported data. The addition of KCl (1 and 2 m) at the natural pH of α‐alanine resulted in a reduction of the decarboxylation rate, suggesting that the transition state is less polar than the zwitterion and/or that the activity of the zwitterion has been reduced. The α‐alanine solution is therefore somewhat more robust in solutions of high ionic strength, such as seawater, than it is in pure water. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 271–277, 2002