Molecular tectonics. Porous hydrogen-bonded networks built from derivatives of 9,9'-spirobifluorene

Molecules with multiple sites that induce strong directional association tend to form open networks with significant volumes available for the inclusion of guests. Such molecules can be conveniently synthesized by grafting diverse sticky sites onto geometrically suitable cores. The characteristic inability of 9,9'-spirobifluorene to form close-packed crystals suggests that it should serve as a particularly effective core for the elaboration of molecules designed to form highly porous networks. To test this hypothesis, various new tetrasubstituted 9,9'-spirobifluorenes with hydrogen-bonding sites at the 3,3',6,6'-positions or 2,2',7,7'-positions were synthesized by multistep routes. Four of these compounds were crystallized, and their structures were determined by X-ray crystallography. In all cases, the compounds form extensively hydrogen-bonded networks with high porosity. In particular, 43% of the volume of crystals of 3,3',6,6'-tetrahydroxy-9,9'-spirobifluorene (28) is available for the inclusion of guests, whereas the porosity is only 28% in crystals of tetrakis(4-hydroxyphenyl)methane, a close model that lacks the spirobifluorene core. Similarly, the porosities found in crystals of 2,2',7,7'-tetra(acetamido)-9,9'-spirobifluorene (33) and 2,2',7,7'-tetrasubstituted tetrakis(diaminotriazine) 39 are 33% and 60%, respectively. Moreover, the porosity of crystals of 2,2',7,7'-tetrasubstituted tetrakis(triaminotriazine) 40 is 75%, the highest value yet observed in crystals built from small molecules. These observations demonstrate that a particularly effective strategy for engineering molecules able to form highly porous networks is to graft multiple sticky sites onto spirobifluorenes or other cores intrinsically resistant to close packing.     

Influence of aromatic substituents on metal(II)salen catalysed, asymmetric synthesis of α-methyl α-amino acids

The influence of substituents on both the aromatic rings of the catalyst, and the benzylidene unit of the substrate are investigated in the (salen)copper(II) catalysed asymmetric benzylation of alanine derivatives. Catalysts with electron-donating, and electron-withdrawing substituents of various sizes and at various locations on the aromatic rings of the salen ligand were prepared, but all exhibited inferior enantioselectivity to the parent (salen)copper(II) complex. In contrast, the introduction of halogenated substituents onto the aromatic ring of the N-benzylidene alanine methyl ester substrate was found to enhance the enantioselectivity of the alkylation with a para-chloro substituent giving optimal results. A new procedure for the preparation of the catalysts which avoids the need for chromatography on sephadex LH20 is reported, and the optimal catalyst obtained in this way was found to be a cobalt(salen) complex.     

Physicochemical and interfacial investigation of lipid/polymer particle assemblies

A model study was investigated to develop colloidal supramolecular assemblies consisting of particles coated with lipid layers. The interactions between monodisperse sulfate-charged poly(styrene) submicrometer particles and zwitterionic/cationic lipid vesicles composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and 1,2-dipalmitoyl-3-trimethylammonium propane were considered. The influence of relevant experimental parameters on the final associations was examined by quasi-elastic light scattering to point out some new phenomena occurring in these colloidal systems. The major role of electrostatic interactions as driving forces to control the organization between cationic lipids and oppositely charged poly(styrene) particles was clearly evident, whereas this influence was less pronounced when considering the zwitterionic lipids. The characterization of these original complex assemblies was completed by a thorough study of the surface modification. The combination of zeta potential measurements, X-ray photoelectron spectroscopy analyses, and microscopy observations proved that the envisioned model can really correspond to polymer particles surrounded by lipids.     

Phosphate-selective electrodes containing immobilised ionophores

Phosphate selective electrodes have been produced based upon rubbery membranes containing heterocylic macrocycles as sensors covalently bound to a cross-linked polystyrene-block–polybutadiene-block–polystyrene (SBS) polymer. The membranes were robust and the best HPO₄²⁻-selective membrane fabricated was composed of 7.1% (m/m) dicumyl peroxide, 28.3% (m/m) 2-nitrophenyloctylether, 9.8% (m/m) 3-(10-undecenyl)-1,5,8-triazacyclodecane-2,4-dione, 31.0% (m/m) SBS and 23.8% (m/m) PoleStar™ 200R (clay-based filler). The characteristics of this electrode were a linear Nernstian range of 3.9×10⁻³ to 1×10⁻⁶ mol dm⁻³ HPO₄²⁻ with a limit of detection of 1.0×10⁻⁶ mol dm⁻³ HPO₄²⁻, a slope of −29.7±0.9 mV per activity decade and a pH range from 6 to 8. Selectivity coefficients for phosphate against various interfering anions (chloride, sulfate and nitrate) were determined. Response times were 2 min or under, stability of response and electrode lifetime in continuous use were also very satisfactory. The response behavior of HPO₄²⁻-ISEs based upon mobile and bound ionophores was comparable and suggests that mobility of the ionophore is not necessary to obtain a working ISE and that covalent binding of ionophores can be used to produce ISEs of increased stability and robustness.     

Phosphines: Nucleophilic organic catalysts for the controlled ring‐opening polymerization of lactides

A new metal‐free synthetic approach to the controlled ring‐opening polymerization (ROP) of lactide with nucleophilic phosphines as transesterification catalysts is described. P(Bu)₃, PhPMe₂, Ph₂PMe, PPh₃, and related phosphines are commercially available, inexpensive catalysts that generate narrowly dispersed polylactides with predictable molecular weights. These organic catalysts must be used in combination with an initiator, such as an alcohol, to generate an alcoholate ester α‐end group upon ROP. A likely polymerization pathway is through a monomer‐activated mechanism, with minimal active species, facilitating narrow molecular weight distributions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 844–851, 2002; DOI 10.1002/pola.10168     

Highly efficient three-component synthesis of protected homoallylic amines by bismuth triflate-catalyzed allylation of aldimines

Bismuth triflate catalyzes the allylation of a variety of in situ generated protected aldimines using aldehydes, primary carbamates, and allyltrimethylsilane in a three-component reaction. The reaction proceeds rapidly and affords the corresponding protected homoallylic amine in good yield (up to 86%). Scope and limitations of the aldehyde and carbamate components are reported.     

Investigation of the Interactions of β‐Peptides with DNA Duplexes by Circular Dichroism Spectroscopy

The interaction of β‐peptides with the DNA duplexes of dA₂₀dT₂₀ and a GCN4‐binding CRE sequence was examined. To gauge the factors that govern these interactions, two β‐pentadecapeptides, 1 and 2 , a β‐dodecapeptide, 3 , three β‐decapeptides, 4 – 6 , three β‐heptapeptides, 7 – 9 , and β‐octaarginine 10 were designed and synthesized. The β‐peptides were conceived to adopt a β‐peptide 3₁₄ helix, in which the side chains at position i and i + 3 are aligned vertically along one side of the helix. The side chains of Lys, Asn, and Arg were positioned such that potential H‐bonding sites were created for a helical conformation to interact with the base pairs of DNA. CD Analysis showed that β‐peptides 1, 2 , and 10 interacted with dA₂₀dT₂₀. In addition, β‐peptides 1 and 2 showed significant interaction with a DNA‐duplex 20mer containing the ATF/CREB recognition sequence for the regulatory protein GCN4. It is impossible, at this stage of the investigation, to make a safe proposal about the actual nature of the interaction of the structures(s) of the complexes, the formation of which is suggested by the CD spectra reported herein.     

X-ray crystal structures of three nonbenzodiazepinic ligands for the benzodiazepine receptor sites: SR95926, CMW1842, and L16317:nab initio MO study of the electronic properties

The crystal structures ofp-methoxyphenyl-3-triazolo [4,3-a] isoquinoline (SR95926),p-methoxyphenyl-3-triazolophtalazine (CMW1842), andp-methoxyphenyl-3-N-dimethoxyethylamino-6-triazolophtalazine (L16317) have been solved by direct methods from single-crystal X-ray diffraction data, and refined by full-matrix least squares. SR95926: monoclinic,P2₁/n,a=20.950(3),b=6.769(1),c=9.465(2) Å,=100.90(1)°. CMW1842: triclinic,P¯1,a=8.784(1),b=9.160(4),c=8.555(1) Å,=99.10(2),=93.90(1), =106.77(1)°. L16317: monoclinic,P2₁/_n,a=20.124(3),b=9.586(1),c=10.788(1) Å,=91.91(1)°. FinalR factors are 0.034, 0.037, and 0.053, respectively. Experimental geometries were used to perform STO-3Gab initio molecular-orbital calculations. A relationship between the electronic pattern within the molecules and the affinity of the benzodiazepine receptor sites is pointed out.     

The paradox of trees in type theory

We show how to represent a paradox similar to Russell's paradox in Type Theory withW-types and a type of all types, and how to use this in order to represent a fixed-point operator in such a theory. It is still open whether such a construction is possible without theW-type.This research was partly supported by ESPIRIT Basic Research Action Logical Frameworks.