Electron irradiation-enhanced core/shell organization of Al(Cr,Fe, Mn)Si dispersoids in Al–Mg–Si alloys

The age hardening 6061-T6 aluminium alloy has been chosen as structural material for the core vessel of the material testing Jules Horowitz nuclear reactor. The alloy contains incoherent Al(Cr, Fe, Mn)Si dispersoids whose characterization by energy-filtered transmission electron microscopy (EFTEM) analysis shows a core/shell organization tendency where the core is (Mn, Fe) rich, and the shell is Cr rich. The present work studies the stability of this organization under irradiation. TEM characterization on the same particles, before and after 1 MeV electron irradiation, reveals that the core/shell organization is enhanced after irradiation. It is proposed that the high level of point defects, created by irradiation, ensures a radiation-enhanced diffusion process favourable to the unmixing forces between (Fe, Mn) and Cr. Shell formation may result in the low-energy interface segregation of Cr atoms within the (Fe, Mn) system combined with the unmixing of Cr, Fe and Mn components.     

Contribution of Cytosine‐Containing Cyclobutane Dimers to DNA Damage Produced by Photosensitized Triplet–Triplet Energy Transfer

Mutagenic cyclobutane pyrimidine dimers (CPDs) can be induced in DNA through either direct excitation or photosensitized triplet–triplet energy transfer (TTET). In the latter pathway, thymines are expected to receive the excitation energy from the photosensitizer and react with adjacent pyrimidines. By using state‐of‐the art analytical tools, we provide herein additional information on the formation of cytosine‐containing CPDs. We thus determined the yield of all possible CPDs upon TTET in a series of natural DNAs with various base compositions. We show that the distribution of CPDs cannot be explained only by excitation of individual thymines. We propose that the mechanism for TTET involves at least dinucleotides as the minimal targets. The observation of the formation of cytosine–cytosine CPDs also suggests that additional pathways are involved in this photosensitized reaction.     

Unraveling the Crystal Structure of Lanthanide–Murexide Complexes: Use of an Ancient Complexometry Indicator as a Near‐Infrared‐Emitting Single‐Ion Magnet

Herein, we provide some structural evidence of the complexation color‐change of murexide solutions in presence of lanthanide, which has been used for decades in complexometric studies. For Ln=Sm to Lu and Y, the compounds crystallize as monomeric [Ln(Murex)₃] ? 11 H₂O with an N3O6 tricapped square‐antiprism environment, which are stable up to 250 °C. Single‐ion magnet (SIM) behavior is then observed on the Yb^III derivative in an original nine‐coordinated environment. In‐field slow relaxation (Δ=(15.6±1) K; τ₀=2.73×10^?6 s) is observed with a very narrow distribution of the relaxation time (α_max=0.09). Magnetic and photophysical properties can be correlated. On one hand the analysis of NIR emission spectrum permits to have access to crystal field parameters and to compare them with those extracted from dc measurements. On the other hand, magnetic measurements permit to identify the nature of the M _J states involved in the ²F_5/2→²F_7/2 luminescence spectrum. The gap between the low‐lying states is in agreement with the energy barrier obtained from magnetic slow‐relaxation measurement.     

A preliminary study on the development and characterisation of enzymatically grafted P(3HB)-ethyl cellulose based novel composites

In the present study, a novel enzyme-based grafting of poly(3-hydroxybutyrate) [P(3HB)] onto the ethyl cellulose (EC) as a backbone polymer was developed under a mild and ecofriendly environment and laccase was used as a grafting tool. The resulting composites were characterised using various instrumental and imaging techniques. The high intensity of the 3,358 cm^?1 band in the FTIR spectra showed an increase of hydrogen–bonding interactions between P(3HB) and EC at that distinct wavelength region. The morphology was examined by scanning electron microscopy, which showed the well dispersed P(3HB) in the backbone polymer of EC. X-ray diffraction pattern for P(3HB) showed distinct peaks at 2-theta values of 28°, 32°, 34°, 39°, 46°, 57°, 64°, 78° and 84°. In comparison with those of neat P(3HB), the degree of crystallinity for P(3HB)-g-EC decreased. The tensile strength, elongations at break and Young’s modulus of P(3HB)-g-EC reached the highest levels in comparison to the film prepared with pure P(3HB) only, which was too brittle to measure any of the above said characteristics. Results obtained in the present study suggest P(3HB)-g-EC as a potential candidate for various biotechnological applications, such as tissue engineering and packaging.     

Functionalization of a Ruthenium–Diacetylide Organometallic Complex as a Next‐Generation Push–Pull Chromophore

The design and preparation of an asymmetric ruthenium–diacetylide organometallic complex was successfully achieved to provide an original donor–π–[M]–π–acceptor architecture, in which [M] corresponds to the [Ru(dppe)₂] (dppe: bisdiphenylphosphinoethane) metal fragment. The charge‐transfer processes occurring upon photoexcitation of the push–pull metal–dialkynyl σ complex were investigated by combining experimental and theoretical data. The novel push–pull complex, appropriately end capped with an anchoring carboxylic acid function, was further adsorbed onto a semiconducting metal oxide porous thin film to serve as a photosensitizer in hybrid solar cells. The resulting photoactive material, when embedded in dye‐sensitized solar cell devices, showed a good spectral response with a broad incident photon‐to‐current conversion efficiency profile and a power conversion efficiency that reached 7.3 %. Thus, this material paves the way to a new generation of organometallic chromophores for photovoltaic applications.     

Third-Generation Solar Cells: Toxicity and Risk of Exposure

Solar energy is considered clean energy, and its use is predicted to increase in the near future. Most installed units today are crystalline solar cells, but the field is in constant development, and when the first dye sensitized solar cell was published by Grätzel and O'Reagan a new, third-generation, solar power was born. Highly toxic metals are used to produce the photovoltaic units today, and with the predicted increase in solar cell installation, the human health hazards of these panels could become an issue. Additionally, many of these materials are used in their nanoform, which is associated with an additional risk. In this article, we discuss the technology behind the third-generation solar cells with its valuable use of nanotechnology as well as the possible health hazard when such nanomaterials are used in solar power units. We will show that the main exposure will occur either during the development and production phases or at the end-of-life stage of the solar cells, where toxic material can leach into landfills, and subsequently into the environment and impact the ecosystem directly, or humans indirectly through edible plants or drinking water.     

Oxidative Stress and Genotoxicity in Melanoma Induction: Impact on Repair Rather Than Formation of DNA Damage?

Keratinocytes and melanocytes, two cutaneous cell types located within the epidermis, are the origin of most skin cancers, namely carcinomas and melanomas. These two types of tumors differ in many ways. First, carcinomas are almost 10 times more frequent than melanomas. In addition, the affected cellular pathways, the mutated genes and the metastatic properties of the tumors are not the same. This review addresses another specificity of melanomas: the role of photo-oxidative stress. UVA efficiently produces reactive oxygen species in melanocytes, which results in more frequent oxidatively generated DNA lesions than in other cell types. The question of the respective contribution of UVB-induced pyrimidine dimers and UVA-mediated oxidatively generated lesions to mutagenesis in melanoma remains open. Recent results based on next-generation sequencing techniques strongly suggest that the mutational signature associated with pyrimidine dimers is overwhelming in melanomas like in skin carcinomas. UVA-induced oxidative stress may yet be indirectly linked to the genotoxic pathways involved in melanoma through its ability to hamper DNA repair activities.     

Heterometallic Triply‐Bridging Bis‐Borylene Complexes

Triply‐bridging bis‐{hydrido(borylene)} and bis‐borylene species of groups 6, 8 and 9 transition metals are reported. Mild thermolysis of [Fe₂(CO)₉] with an in situ produced intermediate, generated from the low‐temperature reaction of [Cp*WCl₄] (Cp*=η⁵‐C₅Me₅) and [LiBH₄?THF] afforded triply‐bridging bis‐{hydrido(borylene)}, [(μ₃‐BH)₂H₂{Cp*W(CO)₂}₂{Fe(CO)₂}] ( 1 ) and bis‐borylene, [(μ₃‐BH)₂{Cp*W(CO)₂}₂{Fe(CO)₃}] ( 2 ). The chemical bonding analyses of 1 show that the B?H interactions in bis‐{hydrido (borylene)} species is stronger as compared to the M?H ones. Frontier molecular orbital analysis shows a significantly larger energy gap between the HOMO‐LUMO for 2 as compared to 1 . In an attempt to synthesize the ruthenium analogue of 1 , a similar reaction has been performed with [Ru₃(CO)₁₂]. Although we failed to get the bis‐{hydrido(borylene)} species, the reaction afforded triply‐bridging bis‐borylene species [(μ₃‐BH)₂{WCp*(CO)₂}₂{Ru(CO)₃}] ( 2′ ), an analogue of 2 . In search for the isolation of bridging bis‐borylene species of Rh, we have treated [Co₂(CO)₈] with nido‐[(RhCp*)₂(B₃H₇)], which afforded triply‐bridging bis‐borylene species [(μ₃‐BH)₂(RhCp*)₂Co₂(CO)₄(μ‐CO)] ( 3 ). All the compounds have been characterized by means of single‐crystal X‐ray diffraction study; ¹H, ¹¹B, ¹³C NMR spectroscopy; IR spectroscopy and mass spectrometry.     

Improvements for ground-based remote sensing of atmospheric aerosol properties by additional polarimetric measurements

We discuss the improvements in the aerosol properties characterization resulting from the additional multi-wavelength polarization measurements measured by a new CIMEL polarized sun/sky-photometer, CE318-DP. In order to process direct-sun, sky and polarization measurements in a wide spectral range (340–1640 nm), we developed new calibration methods and strategies, e.g. using the Langley plot method to calibrate both direct-sun irradiance and sky radiance, as well as combining laboratory facilities with a vicarious method to calibrate the polarized sky measurements. For studying the impact of new polarimetric measurements on the retrievals of aerosol properties, we have processed an extensive record of field measurements using an updated Dubovik and King retrieval algorithm [Dubovik O, Sinyuk A, Lapyonok T, Holben BN, Mishchenko MI, et al. Application of spheroid models to account for aerosol particle nonsphericity in remote sensing of desert dust. J Geophys Res 2006;111:D11208.]. A preliminary analysis shows that adding polarization in the inversion can reduce possible errors (notably for about 30% of our field cases) in the fine mode size distribution, real part of refractive index and particle shape parameter retrievals, especially for small particles.