Community responses to road traffic noise in Hanoi and Ho Chi Minh City

Vietnam is a developing country in southeast Asia, and its environment has been seriously affected by industrialization and urbanization. In large cities like Hanoi (northern Vietnam) and Ho Chi Minh City (southern Vietnam), noise emission from road traffic has been found to be a serious concern among general public. In 2005 and 2007, two large-scale socio-acoustic surveys of community response to road traffic noise were conducted to investigate human reactions to road traffic noise in these cities; the sample sizes were 1503 people in Hanoi and 1471 in Ho Chi Minh City. The noise exposure levels (L_den) were 70–83 dB in Hanoi and 75–83 dB in Ho Chi Minh City. Noise annoyance was estimated using standardized annoyance scales. For both cities, dose–response relationships were established between L_den and the percentage of highly annoyed respondents. Compared to annoyance responses of European people, Vietnamese were less annoyed by road traffic noise by about 5 dB. Hanoi respondents seemed to be more annoyed by noise than Ho Chi Minh City respondents. Conversation and sleep disturbances were not as serious as expected in either city. Furthermore, window orientation in the home was found to affect activity disturbances.     

Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

Spectral probing of carrier traps in Si–Ge alloy nanocrystals

Photogenerated carriers in Si–Ge alloy nanocrystals (NCs) prepared by co‐sputtering method were investigated by mean of transient induced absorption. The carrier relaxation features multiple components, with three decay life times of τ ≈ 600 fs, 12 ps, and 15 ns, established for Si_0.2Ge_0.8 alloy NCs of a mean crystal size of 9 nm and standard deviation of 3 nm. Deep carrier traps, identified at the boundary between the NCs and the SiO₂ host with the ionization energy of about 1 eV, are characterized by a long‐range Coulombic potential. These are responsible for rapid depletion of free carrier population within a few picoseconds after the excitation, which explains the low emissivity of the investigated materials, and also sheds light on the generally low luminescence of Si/Ge and Ge NCs. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Enhanced suppression of superconductivity in amorphous films with nano-scale patterning

We have measured the thickness dependence of the superconducting critical temperature, T_c(d_Bi)$T_c(d_{\text{Bi}})$, in amorphous Bi/Sb films patterned with a regular array of holes as well as nanoscale thickness variations. We find that the mean field T_c$T_c$ is suppressed relative to simultaneously produced unstructured films of the same thickness. Surprisingly, however, the functional form for T_c(d_Bi)$T_c(d_{\text{Bi}})$, remains unaffected. The role of the thickness variations in suppressing T_c$T_c$ is compared to the role of the holes, through parameterization of the surface, as measured through AFM/SEM and a proximity effect calculation. These results suggest that these two nanoscale modifications suppress T_c$T_c$ about equally and are consistent with T_c$T_c$ being determined on a microscopic length scale.     

Structural and compositional heterogeneities in liquid aluminosilicate: insight from a grain structure model

Network structure as well as structural and compositional heterogeneities in aluminosilicate (Al₂O₃-2SiO₂) under compression is investigated by analysis and visualization of simulation data. Structural and compositional heterogeneities are clarified through analysis of topology structure and size distribution of TO _x -clusters (T = Si, Al; x = 3, 4, 5, 6) as well as OT _y -clusters (y = 2, 3, 4). The TO _x -cluster can be considered as TO _x -grains. It appears that the structure of aluminosilicate is the mixture of TO _x -grains with a different short-range order structure and this is the origin of structural heterogeneity. Regarding their composition, the OSi _y - and OAl _y -clusters can be considered as silica- and alumina-grains respectively, and the structure of aluminosilicate can thus be considered to be formed from silica- and alumina-grains. This results in compositional heterogeneity. Moreover, the degree of polymerization and polyamorphism as well as dynamic heterogeneity is also discussed in detail.     

Advances in theoretical and experimental XAFS studies of thermodynamic properties,anharmonic effects and structural determination of fcc crystals

Thermodynamic properties, anharmonic effects and structural determination of fcc crystals have been studied based on the theoretical and experimental Debye–Waller factors presented in terms of cumulant expansion up to the third order, thermal expansion coefficient, X-ray absorption fine structure (XAFS) spectra and their Fourier transform magnitudes. The advances in these studies are performed by the further development of the anharmonic correlated Einstein model primary only for approximating three first XAFS cumulants into the method using that all the considered theoretical and experimental XAFS parameters have been provided based on only the calculated and measured second cumulants. The obtained cumulants describe the anharmonic effects in XAFS contributing to the accurate structural determination. Numerical results for Cu are found to be in good agreement with the experimental values extracted by using the present advanced method and with those obtained by the other measurements.     

A comparative study on the morphology of P3HT:PCBM solar cells with the addition of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by spin and rod coating methods

Our previous study presented up to 20% power conversion efficiency (PCE) enhancement of poly(3-hexylthiophene):phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) solar cells under the Fe₃O₄ nanoparticles (NPs) self-assembly (SA) effect by spin coating. Fe₃O₄ NPs (about 11 nm hydrodynamic diameter) form a thin layer at the top interface of the light absorbing active layer, which results in the generation of PCBM rich region improving the charge transport (Zhang et al. Sol Energ Mat Sol C 160:126–133, 2017). In order to investigate the feasibility of this Fe₃O₄ NPs SA effect under large-scale production condition, a smooth rod was implemented to mimic roll-to-roll coating technique and yield active layers having about the same thickness as the spin-coated ones. Small angle neutron scattering and grazing incidence X-ray diffraction were employed finding out similar morphologies of the active layers by these two coating techniques. However, rod-coated solar cell’s PCE decreases with the addition of Fe₃O₄ NPs compared with the one without them. This is because PCBM rich region is not created at the top interface of the active layer due to the absence of Fe₃O₄ NPs, which is attributed to the weak convective flow and low diffusion rate. Moreover, in the rod-coated solar cells, the presence of Fe₃O₄ NPs causes decrease in P3HT crystallinity, thus the charge transport and the device performance. Our study confirms the role of spin coating in the Fe₃O₄ NPs SA effect and enables researchers to explore this finding in other polymer nanocomposite systems.     

Measurements of the Decay KL-->e+ e- mu+ mu-

The KTeV experiment at Fermilab has isolated a total of 132 events from the rare decay K(L)-->e+ e- mu+ mu-, with an estimated background of 0.8 events. The branching ratio of this mode is determined to be [2.69+/-0.24(stat)+/-0.12(syst)]x10(-9), with a radiative cutoff of M(2)(ee mu mu)/M(2)(K)>0.95. The first measurement using this mode of the parameter alpha from the D'Ambrosio-Isidori-Portolès (DIP) model of the K(L)gamma*gamma* vertex yields a result of -1.59+/-0.37, consistent with values obtained from other decay modes. Because of the limited statistics, no sensitivity is found to the DIP parameter beta. We use this decay mode to set limits on CP and lepton violation.     

Small-core As-Se fiber for Raman amplification

We have demonstrated Raman small-core As-Se fiber. More than 20-dB of gain was observed in a 1.1-m length of fiber pumped by a nanosecond pulse of approximately 10.8-W peak power at 1.50 microm. The peak of the Raman gain occurred at a shift of approximately 240 cm(-1). The Raman gain coefficient is estimated to be approximately 2.3 x 10(-11) m/W, which is more than 300 times greater than that of silica. The large Raman gain coefficient coupled with the large IR transparency window of these fibers shows promise for development of As-Se Raman fiber lasers and amplifiers in the near-, mid-, and long-IR spectral regions.     

Microwave-assisted acylation of 7-amino-5-aryl-6-cyanopyrido[2,3-d]pyrimidines

A microwave-assisted method is described for monoacylating 7-amino-5-aryl-6-cyanopyrido[2,3-d]pyrimidines using excess acid chlorides in pyridine. A diacylated intermediate is effectively deacylated to the product amide by a macroporous-Tris resin. A small library of 17 amides was prepared to validate the method. The integration of commercial microwave technology into the ArQule chemistry platform is also discussed.