Universal scheme for finite-probability perfect transfer of arbitrary multispin states through spin chains

In combination with the theories of open system and quantum recovering measurement, we propose a quantum state transfer scheme using spin chains by performing two sequential operations: a projective measurement on the spins of ‘environment’ followed by suitably designed quantum recovering measurements on the spins of interest. The scheme allows perfect transfer of arbitrary multispin states through multiple parallel spin chains with finite probability. Our scheme is universal in the sense that it is state-independent and applicable to any model possessing spin–spin interactions. We also present possible methods to implement the required measurements taking into account the current experimental technologies. As applications, we consider two typical models for which the probabilities of perfect state transfer are found to be reasonably high at optimally chosen moments during the time evolution.     

Nanoscale hydrodynamic instability in a molten thin gold film induced by femtosecond laser ablation

A mechanism of the formation of a nanotip with a nanoparticle at its top that appears in a thin metal film irradiated by a single femtosecond laser pulse has been studied experimentally and theoretically. It has been found that the nanotip appears owing to a melt flow and a nanojet formation, which is cooled and solidified. Within a proposed hydrodynamic model, the development of thermocapillary instability in the melted film is treated with the use of the Kuramoto-Sivashinsky-type hydrodynamic equation. The simulation shows that the nanojet nucleates in the form of a nanopeak in a pit on the top of a microbump (linear stage) and, then, grows in a nonlinear (explosive) regime of an increase in thermocapillary instability in good agreement with experimental data.     

A planar Bézier profiled horn for reducing penetration force in ultrasonic cutting

An ultrasonic planar horn with a Bézier profile is developed. The first longitudinal displacement mode of the horn is exploited for high displacement amplification in order to reduce the penetration force required to enter and cut materials. The displacement amplification and stress distribution characteristics of the Bézier horn and the commonly used catenary horn are examined. The penetration force by the Bézier horn is nearly 75% of that by the catenary horn with a penetration speed of 0.25 mm/s during cutting a tissue stimulant. At a penetration speed of 0.5 mm/s, the penetration force by the Bézier horn is nearly 85% of that by the catenary horn for cutting a polymethylmethacrylate (PMMA) material. The decrease in the penetration force by the Bézier horn is attributed to the fact that the displacement amplification of the Bézier horn is 30% higher than that of the traditional catenary horn with the same length and end surface widths.     

Microfabrication of stacks of acoustic matching layers for 15 MHz ultrasonic transducers

This paper presents a novel method used to manufacture stacks of multiple matching layers for 15 MHz piezoelectric ultrasonic transducers, using fabrication technology derived from the MEMS industry. The acoustic matching layers were made on a silicon wafer substrate using micromachining techniques, i.e., lithography and etch, to design silicon and polymer layers with the desired acoustic properties. Two matching layer configurations were tested: a double layer structure consisting of a silicon–polymer composite and polymer and a triple layer structure consisting of silicon, composite, and polymer. The composite is a biphase material of silicon and polymer in 2-2 connectivity. The matching layers were manufactured by anisotropic wet etch of a (1 1 0)-oriented Silicon-on-Insulator wafer. The wafer was etched by KOH 40 wt%, to form 83 μm deep and 4.5 mm long trenches that were subsequently filled with Spurr’s epoxy, which has acoustic impedance 2.4 MRayl. This resulted in a stack of three layers: The silicon substrate, a silicon–polymer composite intermediate layer, and a polymer layer on the top. The stacks were bonded to PZT disks to form acoustic transducers and the acoustic performance of the fabricated transducers was tested in a pulse-echo setup, where center frequency, −6 dB relative bandwidth and insertion loss were measured. The transducer with two matching layers was measured to have a relative bandwidth of 70%, two-way insertion loss 18.4 dB and pulse length 196 ns. The transducers with three matching layers had fractional bandwidths from 90% to 93%, two-way insertion loss ranging from 18.3 to 25.4 dB, and pulse lengths 326 and 446 ns. The long pulse lengths of the transducers with three matching layers were attributed to ripple in the passband.     

Focal length measurement of a varifocal liquid lens with capacitance detection

This paper reports on a detailed deformation model of varifocal liquid lenses fabricated by Parylene-on-liquid-deposition (POLD), which can be applied to measure and adjust the focal length of such lenses without using extra sensors or sensing mechanisms. The lens was fabricated by encapsulating a liquid between a transparent electrode and a polymer film that was covered with a metal electrode. When voltage is applied to the two electrodes, the lens deforms due to the electrostatic force, and its focal length and the capacitance between the two electrodes change simultaneously. This characteristic enables the focal length of the lens to be adjusted and detected by measuring the capacitance change. The focal length of the fabricated varifocal liquid lens changed from 153.6 to 82.6 mm by applying 150-V. The focal length change of the liquid lens was calculated from the change in its capacitance. Finally, to confirm the efficiency of this varifocal liquid lens, we fabricated a confocal distance sensor using the lens for laser scanning and demonstrated that this system can be used to measure distances of 94–140 mm with an average error of 0.83 mm and a standard deviation of 0.77 mm.     

Optimization of view ordering for motion artifact suppression

Motion artifacts in MRI may be reduced by optimized view ordering. Extensive simulations of view-ordering techniques were performed on high-resolution phantom images to determine the best strategy for distributing motion in k-space. Although not exhaustive, simulation results indicate that minimizing motion at the center of k-space is critical to overall image quality. For 2D imaging, using edge-center-edge view order and setting the readout direction parallel to the direction of the motion produces the sharpest point spread function and the lowest image energy error. For 3D imaging, using an edge-center-edge view order proves to be the optimum choice in general. Given these observations, several important issues regarding the measurement of motion effects are discussed.     

Rayleigh waves in an isotropic elastic half-space coated by a thin isotropic elastic layer with smooth contact

In the present paper, we are interested in the propagation of Rayleigh waves in an isotropic elastic half-space coated with a thin isotropic elastic layer. The contact between the layer and the half space is assumed to be smooth. The main purpose of the paper is to establish an approximate secular equation of the wave. By using the effective boundary condition method, an approximate, yet highly accurate secular equation of fourth-order in terms of the dimensionless thickness of the layer is derived. From the secular equation obtained, an approximate formula of third-order for the velocity of Rayleigh waves is established. The approximate secular equation and the formula for the velocity obtained in this paper are potentially useful in many practical applications.     

A determination of antioxidant efficiencies using ESR and computational methods

Using Transition-State Theory, experimental rate constants, determined over a range of temperatures, for reactions of Vitamin E type antioxidants are analysed in terms of their enthalpies and entropies of activation. It is further shown that computational methods may be employed to calculate enthalpies and entropies, and hence Gibbs free energies, for the overall reactions. Within the linear free energy relationship (LFER) assumption, that the Gibbs free energy of activation is proportional to the overall Gibbs free energy change for the reaction, it is possible to rationalise, and even to predict, the relative contributions of enthalpy and entropy for reactions of interest, involving potential antioxidants. A method is devised, involving a competitive reaction between *CH3 radicals and both the spin-trap PBN and the antioxidant, which enables the relatively rapid determination of a relative ordering of activities for a series of potential antioxidant compounds, and also of their rate constants for scavenging *CH3 radicals (relative to the rate constant for addition of *CH3 to PBN).     

Transient Absorption Dynamics and Nonlinear Optical Response in Colloidal Ag2S Quantum Dots

Optics and Spectroscopy - The mechanism of the nonlinear optical response of colloidal solutions of Ag2S quantum dots passivated with thioglycolic acid molecules is considered. Appearance of...     

Choice of Parameters for Toluidine Blue O Colorimetric Assay: Influence on the Determination of Grafting Density of Anionic Groups

Journal of Applied Spectroscopy - The grafting of specific functional groups has been drawing attention later as a simple and effective way to modify materials surfaces to induce a particular...