Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

Phosphate-selective electrodes containing immobilised ionophores

Phosphate selective electrodes have been produced based upon rubbery membranes containing heterocylic macrocycles as sensors covalently bound to a cross-linked polystyrene-block–polybutadiene-block–polystyrene (SBS) polymer. The membranes were robust and the best HPO₄²⁻-selective membrane fabricated was composed of 7.1% (m/m) dicumyl peroxide, 28.3% (m/m) 2-nitrophenyloctylether, 9.8% (m/m) 3-(10-undecenyl)-1,5,8-triazacyclodecane-2,4-dione, 31.0% (m/m) SBS and 23.8% (m/m) PoleStar™ 200R (clay-based filler). The characteristics of this electrode were a linear Nernstian range of 3.9×10⁻³ to 1×10⁻⁶ mol dm⁻³ HPO₄²⁻ with a limit of detection of 1.0×10⁻⁶ mol dm⁻³ HPO₄²⁻, a slope of −29.7±0.9 mV per activity decade and a pH range from 6 to 8. Selectivity coefficients for phosphate against various interfering anions (chloride, sulfate and nitrate) were determined. Response times were 2 min or under, stability of response and electrode lifetime in continuous use were also very satisfactory. The response behavior of HPO₄²⁻-ISEs based upon mobile and bound ionophores was comparable and suggests that mobility of the ionophore is not necessary to obtain a working ISE and that covalent binding of ionophores can be used to produce ISEs of increased stability and robustness.     

Reduction par les sels chromeux de bromures benzyliques ortho-o-acyles avec transposition du groupement acyle : De l'' ester : acces aux ortho-hydroxybenzyl cetones non masquees et une nouvelle preparation de benzo¦b¦furannes substitues en position-2

The σ-bonded organochromium (III) complexes resulting from the reduction of -O-acyl benzylic bromides with CrCl₂., undergo an 1,5-transposition of the ester acyl functional group which allows, through selected experimental conditions either a selective access to the unmasked -hydroxybenl ketones or a new preparation of the 2-substituted benzo¦b¦furans . The scope and limitations of the method are presented.     

Half-sandwich and mixed-ring uranium complexes

The monocyclooctatetraene uranium complex [U(COT)(I)₂(THF)₂] (COT=η-C₈H₈; THF=tetrahydrofuran), isolated from the reaction of bis(cyclooctatetraene)uranium with iodine, is a precursor for the synthesis of the alkyl derivatives [U(COT)(CH₂Ph)₂i (HMPA) ₂], [U(COT)(CH₂SiMe₃)₂(HMPA)] (HMPA=hexamethyl phosphorous triamide) and [U(COT)CH₂SiMe₃)₃] [Li(THF)₃] and of the mixed-ring compounds [U(COT)(η-C₅R₅)(I)] (R=H or Me). The last were used to prepare the amide and alkyl complexes [U(COT)(η-C₅H₅)(N{SiMe₃}₂)] and [U(COT)(η-C₅Me₅)(CH₂SiMe₃)].     

Synthesis of C8-glycomimetics as potential glycosidases inhibitors

The synthesis of C8-glycomimetics is described from C₂-symmetrical polyhydroxylated cyclooctenes derived from carbocyclisation of enantiomerically pure 1,9-dienes by ring closing metathesis. Their obtention notably involved either hydroboration followed by oxidation to carbasugars or to cyclooctanones then reductive amination, or formation of a cis-cyclic sulfate followed by successive introduction of an azido group, reduction and subsequent reductive amination. The biological activity of the C8-carbasugars and related aminocyclitols, analogous to voglibose, has been evaluated towards several commercially available glycosidases.     

Wafer and epilayer improvement for integrated optics devices on InP: the ESPRIT project 2518

Ga _x In_1–x As _y P_1–y alloys lattice matched to InP substrates are currently used to fabricate optoelectronic and integrated optics devices. To achieve devices with high performances and high fabrication yield, the uniformity and reproducibility of the Ga _x In_1–x As _y P_1–y epitaxial layers (composition, thickness, doping, etc.) have become key parameters. These problems have been addressed in the frame of ESPRIT project 2518 and are presented in this paper. Several aspects have been considered starting from the optimization of InP substrates, the MOVPE growth of uniform GalnAsP layers, the material characterization to the validation of material uniformity on passive optical waveguides. Both scanning photoluminescence analysis and waveguide losses measurements performed on 2 inch wafers with a high lateral resolution have shown that high quality uniform GalnAsP layers can be obtained reproducibly on 2 InP substrates using a commercially available LP-MOCVD growth process. In particular, more than 60% of 36 mm long, 3m wide and 100m spaced rib waveguides exhibit losses below 0.8dBcm^–1.     

Morphology of adsorbed polymers and solid surface wettability

The adsorption of a polyacrylamide (MW 14600) and two polysaccharides (MW 9260 and 706 x 10(3)) onto model silica surfaces of different hydrophobicities was investigated. In all cases, adsorption adhered to the Freundlich isotherm, reflecting the heterogeneous character of the solid substrates. The latter strongly influenced the character of the adsorbed polymer, with morphologies from chainlike structures to thin films and patches being observed. Surface roughness, polymer type, and molecular weight also play roles in controlling adsorbed polymer morphology. Surface wettability is strongly influenced by the thickness of the adsorbed layer.