Spherical molecularly imprinted polymer particles: a promising tool for molecular recognition in capillary electrokinetic separations

Spherical molecularly imprinted polymer particles obtained via precipitation polymerization, were introduced as a pseudostationary phase in capillary electrophoresis (CE) to study molecular recognition. Analyses were performed via a partial filling technique using (+)-ephedrine-imprinted microspheres (100-200 nm) which were polymerized from methacrylic acid and 1,1,1-Tris(hydroxymethyl)propanetrimethacrylate using acetonitrile as the solvent. The influence of pH and the modifier content on the separation was investigated. A 0.1% w/v suspension in an aqueous 10 mM phosphate buffer (pH 2.5 with 40% acetonitrile) was hydrodynamically injected into the CE system (80% of the effective capillary length) and led to full baseline separation of racemic ephedrine within 10 min.     

Low-valent cobalt complexes with three different pi acceptor ligands: experimental and DFT studies of the reduced and the low-lying excited states of (R-DAB)Co(NO)(CO), R-DAB = substituted 1,4-diaza-1,4-butadiene

The complexes (RN=CH-CH=NR)Co(NO)(CO) with R = isopropyl, 2,6-diisopropylphenyl, or p-tolyl are chemically and electrochemically reducible to radical anions at potentials which strongly depend on R. The DFT calculated structure for the neutral compound with R = iPr agrees with the experiment, and the computed structure of the anion radical reveals changes according to a reduction of the R-DAB ligand. EPR results confirm an (R-DAB)-based singly occupied molecular orbital in [(RNCHCHNR)Co(NO)(CO)](.-), with minor but detectable contributions from NO as supported by IR spectroelectrochemistry and as quantified by DFT spin density calculations. The calculations indicate increasingly stabilized CO, NO, and RNCHCHNR pi* acceptor orbitals, in that order. On the basis of TD-DFT (time-dependent density functional theory) calculations, the lowest-lying excited states are assigned to metal-to-(R-DAB) charge transfer transitions while bands due to the metal-to-nitrosyl charge transfer occur at higher energies but still in the visible region. Resonance Raman studies were used to probe these assignments.     

Molecular assembly in synthesised hydrotalcites of formula Cu(x)Zn(6 - x)Al2(OH)16(CO3) x 4H2O--a vibrational spectroscopic study

Infrared and Raman spectroscopy have been used to characterise synthetic hydrotalcites of formula Cu(x)Zn(6 - x)Al2(OH)16(CO3) x 4H2O. The spectra have been used to assess the molecular assembly of the cations in the hydrotalcite structure. The spectra may be conveniently subdivided into spectral features based (a) upon the carbonate anion (b) the hydroxyl units (c) water units. The Raman spectra of the hydroxyl-stretching region enable bands to be assigned to the CuOH, ZnOH and AlOH units. It is proposed that in the hydrotalcites with minimal cationic replacement that the cations are arranged in a regular array. For the Cu(x)Zn(6 - x)Al2(OH)16(CO3) x 4H2O hydrotalcites, spectroscopic evidence suggests that 'islands' of cations are formed in the structure. In a similar fashion, the bands assigned to the interlayer water suggest that the water molecules are also in a regular well-structured arrangement. Bands are assigned to the hydroxyl stretching vibrations of water. Three types of water are identified (a) water hydrogen bonded to the interlayer carbonate ion (b) water hydrogen bonded to the hydrotalcite hydroxyl surface and (c) interlamellar water. It is proposed that the water is highly structured in the hydrotalcite as it is hydrogen bonded to both the carbonate anion and the hydroxyl surface.     

Synthesis of 2′-Deoxy-5-(isothiazol-5-yl)uridine and Its Interaction with the HSV-1 Thymidine Kinase

2′-Deoxy-5-(isothiazol-5-yl)uridine ( 12 ) was synthesized starting from 2′-deoxy-5-iodouridine using a Pd-catalysed cross-coupling reaction with propiolaldehyde diethyl acetal followed by deprotection and ring closure using thiosulfate. 2′-Deoxyuridine 12 has a particular place among the 5-heteroaryl-substituted 2′-deoxyuridines in that it has a high affinity for herpes simplex virus type 1 (HSV-1)-encoded thymidine kinase (TK) without antiviral activity. Biochemical studies revealed that 12 is a substrate for viral TK. We further investigated the interaction of 12 with the HSV-1 thymidine kinase. The conformation of 12 in solution was established by NMR spectroscopy. The most stable conformer 12A has the S-atom of the isothiazole ring placed in the neighbourhood of the C(4)?O group of the pyrimidine moiety. The compound was docked in its most stable conformation in the active site of HSV-1 TK and subjected to energy minimization. This demonstrated that the isothiazole moiety binds in a cavity lined by the side chains of Tyr-132, Arg-163, Ala-167, and Ala-168 and that the C(3) atom of the isothiazole moiety is located in close proximity of the phenolic O-atom of Tyr-132 and the aliphatic part of the Arg-163 side chain.     

Kiesels?urebestimmung durch Destillation von H2SiF6 in einer Silberapparatur

Znsammenfassung Die Arbeit behandelt die Abtrennung der Kieselsäure von TiO₂, Al₂O₃, V₂O₅ und ZrO₂ durch Verflüchtigung von H₂SiF₆ in einer Silberapparatur. Die anschließende photometrische SiO₂-Bestimmung erfolgt nach der Silicomolybdänblaumethode. Es ergibt sich außerdem die Möglichkeit, Kieselsäure von Metallsalzen und von weiteren Oxyden zu trennen, die Fluß- und Schwefelsäure nicht in stärkerem Maße binden.II. Teil der Dissertation von Th. Keil, Gießen 1958. — I. Teil: diese Z. 165, 188, (1959).Wir danken der Titangesellschaft m.b.H., Leverkusen, für das Überlassen der Silberapparatur und überhaupt für das große Interesse, das sie dieser Arbeit entgegengebracht hat.     

A crystallite packing model for pseudoboehmite formed during the hydrolysis of trisecbutoxyaluminium to explain the peptizability

A model for pseudoboehmite crystallite packing formed during the hydrolysis of trisecbutoxyaluminium is postulated. The model describes platelike crystallites of pseudoboehmite stacked in a sharing edges only configuration. With this type of stacking, the pore sizes detected are approximately equal to the crystallite sizes of the hydrolysates. The hydrolysates age via a dissolution re-precipitation reaction. This increases the size of the crystallite size of the pseudoboehmite formed, speeding peptization by allowing nitrate ions to enter pores and access the surfaces of the crystallites. This type of model also allows an explanation for the peptization kinetics of systems containing sec-butanol formed during the hydrolysis of trisecbutoxyaluminium.     

Size effect on surface tension of small droplets

We discuss the influence of the effect of droplet size on the surface tension γ and develop a self-consistent method to derive a relation between γ and the droplet radius r. Referring our expression for γ(r) to the surface of tension we recover Tolman's result.     

Synthesis of 3-nitro- and 3-aminoquinoline-2,4-diones. An unexpected route to 3-hydroxyquinoline-2,4-diones

Nitration of 3-substituted-4-hydroxy-2(1H)-quinolones 1 with nitric acid leads either to 3-nitro- 2 or 3-hydroxyquinolinediones 3 , depending on the reaction conditions. 3-Substituted-3-hydroxyquinolinediones 3 are also obtained by oxidative hydroxylation with peracetic acid. Amination of 3-substituted-3-chloroquinolinediones 4 with ammonium hydroxide predominantly leads again to 3-substituted-3-hydroxyquinolinediones 3 , only in one case the 3-aminoquinolinedione 5 could be isolated. With morpholine or pyridine as amines the expected 3-aminoquinolinediones 6 and 7 were obtained.     

Homo- and heteroflocculation of papermaking fines and fillers

The effects of cationic polyethylenimine (PEI) on the colloidal stability of anionic fines (microcrystalline cellulose or thermomechanical fines), fillers (clay) and their mixtures in deionized and tap water were investigated, using a photometric dispersion analyzer. Measurements confirmed that PEI flocculates all used materials by charge neutralization. As expected, higher additions of PEI lead to electrostatic stabilization of microcellulose and clay suspensions, but it was not possible to stabilize the suspension of fines using high additions of PEI. This is ascribed to the mechanical entanglements of fibrillar fines. In tap water, much more PEI is needed to reach optimum flocculation conditions than in deionized water. Heteroflocculation between PEI-coated clay and fines takes place with a rate which, for high fines concentration and a constant clay concentration, is independent of fines concentration. A theoretical model for the heteroflocculation of fines with PEI-coated clay has been developed, which explains the observed trends. In essence, clay particles can act as bridging agents for fines flocculation.