On the possible catalysis by single water molecules of gas-phase hydrogen abstraction reactions by OH radicals

The gas phase hydrogen abstraction reaction between OH and CY(2)XH, where X = H, F, OH, or NH(2) and Y = H, CH(3) or F, in the absence and presence of a single water molecule is investigated using both density function theory, B3LYP, and explicitly correlated coupled cluster theory, CCSD(T)-F12. We find that a single water molecule could have a catalytic effect at low temperatures possible in laboratory experiments, but does not seem to catalyze these reactions at 298 K, and will not play a role under relevant atmospheric conditions.     

Quantification of asenapine and three metabolites in human plasma using liquid chromatography-tandem mass spectrometry with automated solid-phase extraction: application to a phase I clinical trial with asenapine in healthy male subjects

The development and validation of methods for determining concentrations of the antipsychotic drug asenapine (ASE) and three of its metabolites [N-desmethylasenapine (DMA), asenapine-N(+) -glucuronide (ASG) and 11-O-sulfate-asenapine (OSA)] in human plasma using LC-MS/MS with automated solid-phase extraction is described. The three assessment methods in human plasma were found to be acceptable for quantification in the ranges 0.0250-20.0 ng/mL (ASE), 0.0500-20.0 ng/mL (DMA and OSA) and 0.250-50.0 ng/mL (ASG).     

Complexation of divalent metal ions with diols in the presence of anion auxiliary ligands: zinc-induced oxidation of ethylene glycol to glycolaldehyde by consecutive hydride ion and proton shifts

Ternary complexes of the type AH???M(2+)???L(-) (AH?=?diol, including diethylene and triethylene glycol, M?=?Ca, Mn, Fe, Co, Ni, Cu and Zn and auxiliary anion ligand L(-) =?CH(3)COO(-), HCOO(-) and Cl(-)) have been generated in the gas phase by MALDI and ESI, and their dissociation characteristics have been obtained. Use of the auxiliary ligands enables the complexation of AH with the divalent metal ion without AH becoming deprotonated, although A(-)???M(2+) is often also generated in the ion source or after MS/MS. For M?=?Ca, dissociation occurs to AH?+?M(2+)???L(-) and/or to A(-)???M(2+) + LH, the latter being produced from the H-shifted isomer A(-) ???M(2+)???LH. For a given ligand L(-), the intensity ratio of these processes can be interpreted (barring reverse energy barriers) in terms of the quantity PA(A(-)) - Ca(aff) (A(-)), where PA is the proton affinity and Ca(aff) is the calcium ion affinity. Deuterium labeling shows that the complex ion HOCH(2)CH(2) OH???Zn(2+)???(-)OOCCH(3), in addition to losing acetic acid (60 Da), also eliminates glycolaldehyde (HOCH(2)CH=O, also 60 Da); it is proposed that these reactions commence with a hydride ion shift to produce the ion-dipole complex HOCH(2)CHOH(+)??? HZnOOCCH(3), which then undergoes proton transfer and dissociation to HOCH(2)CH=O?+?HZn(+)???O?=?C(OH)CH(3). In this reaction, ethylene glycol is oxidized by consecutive hydride ion and proton shifts. A minor process leads to loss of the isomeric species HOCH=CHOH.     

Fragmentation trees for the structural characterisation of metabolites

Metabolite identification plays a crucial role in the interpretation of metabolomics research results. Due to its sensitivity and widespread implementation, a favourite analytical method used in metabolomics is electrospray mass spectrometry. In this paper, we demonstrate our results in attempting to incorporate the potentials of multistage mass spectrometry into the metabolite identification routine. New software tools were developed and implemented which facilitate the analysis of multistage mass spectra and allow for efficient removal of spectral artefacts. The pre-processed fragmentation patterns are saved as fragmentation trees. Fragmentation trees are characteristic of molecular structure. We demonstrate the reproducibility and robustness of the acquisition of such trees on a model compound. The specificity of fragmentation trees allows for distinguishing structural isomers, as shown on a pair of isomeric prostaglandins. This approach to the analysis of the multistage mass spectral characterisation of compounds is an important step towards formulating a generic metabolite identification method. Copyright ? 2012 John Wiley & Sons, Ltd.     

Complexation of divalent metal ions with diols in the presence of anion auxiliary ligands: zinc‐induced oxidation of ethylene glycol to glycolaldehyde by consecutive hydride ion and proton shifts

Ternary complexes of the type AH???M²⁺???L^– (AH = diol, including diethylene and triethylene glycol, M = Ca, Mn, Fe, Co, Ni, Cu and Zn and auxiliary anion ligand L^– = CH₃COO^–, HCOO^– and Cl^–) have been generated in the gas phase by MALDI and ESI, and their dissociation characteristics have been obtained. Use of the auxiliary ligands enables the complexation of AH with the divalent metal ion without AH becoming deprotonated, although A^–???M²⁺ is often also generated in the ion source or after MS/MS. For M = Ca, dissociation occurs to AH + M²⁺???L^– and/or to A^–???M²⁺ + LH, the latter being produced from the H‐shifted isomer A^–???M²⁺???LH. For a given ligand L^–, the intensity ratio of these processes can be interpreted (barring reverse energy barriers) in terms of the quantity PA(A^–) – Ca_aff(A^–), where PA is the proton affinity and Ca_aff is the calcium ion affinity. Deuterium labeling shows that the complex ion HOCH₂CH₂OH???Zn²⁺???^–OOCCH₃, in addition to losing acetic acid (60 Da), also eliminates glycolaldehyde (HOCH₂CH=O, also 60 Da); it is proposed that these reactions commence with a hydride ion shift to produce the ion–dipole complex HOCH₂CHOH⁺??? HZnOOCCH₃, which then undergoes proton transfer and dissociation to HOCH₂CH=O + HZn⁺???O = C(OH)CH₃. In this reaction, ethylene glycol is oxidized by consecutive hydride ion and proton shifts. A minor process leads to loss of the isomeric species HOCH=CHOH. Copyright © 2012 John Wiley & Sons, Ltd.     

Kinetic (T = 201-298 K) and equilibrium (T = 320-420 K) measurements of the C3H5 + O2 ⇆ C3H5O2 reaction

The kinetics and equilibrium of the allyl radical reaction with molecular oxygen have been studied in direct measurements using temperature-controlled tubular flow reactor coupled to a laser photolysis/photoionization mass spectrometer. In low-temperature experiments (T = 201-298 K), association kinetics were observed, and the measured time-resolved C(3)H(5) radical signals decayed exponentially to the signal background. In this range, the determined rate coefficients exhibited a negative temperature dependence and were observed to depend on the carrier-gas (He) pressure {p = 0.4-36 Torr, [He] = (1.7-118.0) × 10(16) cm(-3)}. The bimolecular rate coefficients obtained vary in the range (0.88-11.6) × 10(-13) cm(3) s(-1). In higher-temperature experiments (T = 320-420 K), the C(3)H(5) radical signal did not decay to the signal background, indicating equilibration of the reaction. By measuring the radical decay rate under these conditions as a function of temperature and following typical second- and third-law procedures, plotting the resulting ln K(p) values versus 1/T in a modified van't Hoff plot, the thermochemical parameters of the reaction were extracted. The second-law treatment resulted in values of ΔH(298)° = -78.3 ± 1.1 kJ mol(-1) and ΔS(298)° = -129.9 ± 3.1 J mol(-1) K(-1), with the uncertainties given as one standard error. When results from a previous investigation were taken into account and the third-law method was applied, the reaction enthalpy was determined as ΔH(298)° = -75.6 ± 2.3 kJ mol(-1).     

Solvent induced enhancement of nonlinear optical response of graphdiyne

Flat and crystalline materials with exceptional nonlinear optical(NLO) properties are highly desirable for their potential applications in integrated NLO photonic devices.Graphdiyne(GD),a new twodimensional(2 D) carbon allotrope,has recently evoked burgeoning research attention by virtue of its tunable bandgap along with a high carrier mobility and extended π-conjugation compared with most conventional optical materials.Here,we experimentally probe the third-order nonlinear optical response of GD dispersed in several common solvents(alcohols) using a femtosecond Z-scan technique.The measured nonlinear optical refractive index is in the order of ~10^-8 cm²/W,which is approximately one order of magnitude higher than that of most 2 D materials.In particular,we find that different NLO responses can be observed from GD when dispersed in different solvents,with the strongest NLO response when dispersed in 1-propanol.It is proposed that some intrinsic properties of the solvents,such as the polarity and viscosity,could influence the NLO response of GD materials.Our experimental results confirm the assumptions on the NLO behavior in GD and demonstrate its great potential for future generations of Kerr-effect-based NLO materials and devices.     

E-Beam—a new transfer system for isolator technology

In every aseptic filling application, the sterile transfer of goods into the aseptic area is a challenge, and there are many different ways to do it.

With isolator technology a higher sterility assurance level (SAL) is achieved. This SAL is only as good as the weakest segment in the chain of manufacturing. The transfer of goods into and out of the isolator is one of these critical segments.

Today different techniques, some already well established, others still very new, are available on the market like: dry heat tunnel, autoclave, pulsed light, rapid transfer systems (RTP), H₂O₂ tunnel, UV light, etc. all these systems are either not applicable for continuous transfer, only good for heat-compatible materials like glass, or do not guarantee a 6 log spore reduction.

E-Beam opens new perspectives in this field. With E-beam technology it is possible to transfer heat-sensitive (plastic), pre-sterilised materials at high speed, continuously into an aseptic area.

E-Beam unifies three different technologies, that result in a very efficient and high-speed decontamination machine designed for the pharmaceutical industry. First, there is the electron beam that decontaminates the goods and an accurate shielding that protects the surrounding from this beam. Second, there is the conveyor system that guarantees the output and the correct exposure time underneath the beam. And third, there is the isolator interface to provide correct differential pressure and clean air inside the tunnel as well as the decontamination of the tunnel with H₂O₂ prior to production.

The E-beam is a low-energy electron beam, capable of decontaminating any kind of surface. It penetrates only a few micrometers into the material and therefore does not deform the packaging media.

Currently, machines are being built to transfer pre-sterilised syringes, packed in plastic tubs with a Tyvek cover into an aseptic filling isolator with the following data: decontamination efficiency of 10⁶ (6 log spore reduction), decontamination speed of 6 tubs (600 syringes) per minute.

This is just one of many applications for this new technology.     

Depletion-flocculation in oil-in-water emulsions using fibrillar protein assemblies

This paper shows that low concentrations of beta-lactoglobulin fibrils can induce depletion-flocculation in beta-lactoglobulin-stabilized oil-in-water emulsions. The minimum required fibril concentration for flocculation was determined experimentally for fibril lengths of about 3 and 0.1 microm. The minimum fibril concentration for flocculation is two orders of magnitude higher for the short fibrils than for the long ones. These experimental results correspond well with a theoretical prediction based on a model of spinodal decomposition. In addition, rheological measurements were performed, verifying that flocculation was induced by a depletion mechanism. The results of this study show that the minimum concentration required for depletion-flocculation can be tuned by varying the length of the fibrils.     

On the “Tertiary Structure” of Poly‐Carbenes; Self‐Assembly of sp3‐Carbon‐Based Polymers into Liquid‐Crystalline Aggregates

The self‐assembly of poly(ethylidene acetate) (st‐PEA) into van der Waals‐stabilized liquid‐crystalline (LC) aggregates is reported. The LC behavior of these materials is unexpected, and unusual for flexible sp³‐carbon backbone polymers. Although the dense packing of polar ester functionalities along the carbon backbone of st‐PEA could perhaps be expected to lead directly to rigid‐rod behavior, molecular modeling reveals that individual st‐PEA chains are actually highly flexible and should not reveal rigid‐rod induced LC behavior. Nonetheless, st‐PEA clearly reveals LC behavior, both in solution and in the melt over a broad elevated temperature range. A combined set of experimental measurements, supported by MM/MD studies, suggests that the observed LC behavior is due to self‐aggregation of st‐PEA into higher‐order aggregates. According to MM/MD modeling st‐PEA single helices adopt a flexible helical structure with a preferred trans‐gauche syn‐syn‐anti‐anti orientation. Unexpectedly, similar modeling experiments suggest that three of these helices can self‐assemble into triple‐helical aggregates. Higher‐order assemblies were not observed in the MM/MD simulations, suggesting that the triple helix is the most stable aggregate configuration. DLS data confirmed the aggregation of st‐PEA into higher‐order structures, and suggest the formation of rod‐like particles. The dimensions derived from these light‐scattering experiments correspond with st‐PEA triple‐helix formation. Langmuir–Blodgett surface pressure–area isotherms also point to the formation of rod‐like st‐PEA aggregates with similar dimensions as st‐PEA triple helixes. Upon increasing the st‐PEA concentration, the viscosity of the polymer solution increases strongly, and at concentrations above 20 wt % st‐PEA forms an organogel. STM on this gel reveals the formation of helical aggregates on the graphite surface–solution interface with shapes and dimensions matching st‐PEA triple helices, in good agreement with the structures proposed by molecular modeling. X‐ray diffraction, WAXS, SAXS and solid state NMR spectroscopy studies suggest that st‐PEA triple helices are also present in the solid state, up to temperatures well above the melting point of st‐PEA. Formation of higher‐order aggregates explains the observed LC behavior of st‐PEA, emphasizing the importance of the “tertiary structure” of synthetic polymers on their material properties.