Preparation of cerium-loaded Y-zeolites for removal of organic sulfur compounds from hydrodesulfurizated gasoline and diesel oil

Ce(IV)-loaded Y-zeolites (CeY) were prepared for selective removal of the trace amount of organic sulfur compounds from hydrodesulfurization (HDS)-treated diesel oil. The CeY samples can be obtained from NH4-Y-zeolite (NH4Y) using liquid-phase ion-exchange and solid-state ion-exchange methods. The ion-exchange reactions, structures, and selective adsorptions of organic sulfur compounds of the CeY samples were investigated using XRD, IR, XPS, TEM, and GC sulfur analyzer. The organic sulfur compound uptakes strongly depend on the amount and the valency of Ce in the zeolite structure. Ce(IV) shows much higher adsorptive ability than Ce(III). A CeY-S sample prepared by solid-state ion-exchange reaction of NH4Y and Ce(NO3)3 with Ce/NH4 mole ratio of 0.63 at 250 degrees C showed a maximum sulfur uptake from a model solution of HDS-treated gasoline containing thiophene [S = 5 ppm (ppm = mg/L)]. A desulfurization from a HDS-treated diesel oil containing organic sulfur compounds (S = 1.87 ppm) and H2S (S = 0.73 ppm) was investigated with a combination of the CeY-S and a CuO adsorbent for removal of H2S by a batch method. The sulfur content was reduced to below 0.01 ppm for the first time. This method provides a promising desulfurization process to prepare a clean fuel for fuel cells.     

Expression of a supramolecular complex at a multivalent interface

The multivalent binding of a supramolecular complex at a multivalent host surface by combining the orthogonal beta-cyclodextrin (CD) host-guest and metal ion-ethylenediamine coordination motifs is described. As a heterotropic, divalent linker, an adamantyl-functionalized ethylenediamine derivative was used. This was complexed with Cu(II) or Ni(II). The binding of the complexes to a CD self-assembled monolayer (SAM) was studied as a function of pH by means of surface plasmon resonance (SPR) spectroscopy. A heterotropic, multivalent binding model at interfaces was used to quantify the multivalent enhancement at the surface. The Cu(II) complex showed divalent binding to the CD surface with an enhancement factor higher than 100 relative to the formation of the corresponding divalent complex in solution. Similar behavior was observed for the Ni(II) system. Although the Ni(II) system could potentially be trivalent, only divalent binding was observed at the CD SAMs, which was confirmed by desorption experiments.     

Analytical and finite-element study of optimal strain distribution in various beam shapes for energy harvesting applications

Owing to the increasing demand for harvesting energy from environmental vibration for use in self-powered electronic applications, cantilever-based vibration energy harvesting has attracted considerable interest from various parties and has become one of the most common approaches to converting redundant mechanical energy into electrical energy. As the output voltage produced from a piezoelec-tric material depends largely on the geometric shape and the size of the beam, there is a need to model and compare the performance of cantilever beams of differing geometries. This paper presents the study of strain distribution in various shapes of cantilever beams, including a convex and concave edge profile elliptical beam that have not yet been discussed in any prior literature. Both analytical and finite-element models are derived and the resultant strain distributions in the beam are computed based on a MATLAB solver and ANSYS finite-element analysis tools. An optimum geome-try for a vibration-based energy harvesting system is verified. Finally, experimental results comparing the power density for triangular and rectangular piezoelectric beams are also pre-sented to validate the findings of the study, and the claim, as suggested in the literature, is verified.     

Preparation of mesoporous carbon/manganese oxide materials and its application to supercapacitor electrodes

By employing a new template method using surfactant/silicate solution template, highly mesoporous carbon/manganese oxide composite materials were prepared in one step and their performance as electrodes of supercapacitor was investigated. Because of the high dispersion of Mn oxide and well developed mesoporosity of carbon, a high specific capacitance and an improved rate performance were observed at the electrodes fabricated by Mn/carbon composite materials.     

Self-supported interconnected Pt nanoassemblies as highly stable electrocatalysts for low-temperature fuel cells

In it for the long haul: Clusters of Pt nanowires (3D Pt nanoassemblies, Pt?NA) serve as an electrocatalyst for low-temperature fuel cells. These Pt nanoassemblies exhibit remarkably high stability following thousands of voltage cycles and good catalytic activity, when compared with a commercial Pt?catalyst and 20?%?wt Pt?catalyst supported on carbon black (20?% Pt/CB).     

Scanning photocurrent microscopy of lateral organic bulk heterojunctions

Scanning confocal photocurrent microscopy has been used to characterize carrier collection efficiency in lateral bulk heterojunction devices. By analyzing the photocurrent mappings within these devices, the lateral extents of the space charge regions has been measured and reported. Modulation via white light bias or increased voltage bias is also shown to increase the size of the space charge regions.     

Fabrication of microgel-in-liposome particles with improved water retention

Corneocytes represents the main water reservoir of stratum corneum, and that ability intimately arises from their architecture and total composition. Here we describe a novel method for fabricating a microgel-in-liposome (M-i-L) structure consisting of a sodium hyaluronate microgel and a lipid membrane envelop in order to mimic corneocyte cell structures. The essence of our approach is to use a lecithin-based microemulsion with a very low interfacial tension between the water droplet and oil continuous phase. Using this emulsion enables us to stabilize a dispersion of microgel particles without phase separation or aggregation. The addition of excess water produced single-core or multicore microgel particles enveloped in a lipid layer. To demonstrate the applicability of this unique vesicle system, we encapsulated a high concentration of natural moisturizing factor (NMF) in the microgel core and investigated how the M-i-L structure affected the water retention in comparison with other control systems. We have observed that our M-i-L particles with the NMF in the core, which mimicked the corneocyte cell structure, showed an excellent ability to retain water in the system. This experimental result inspired us to investigate how corneocyte cells, which feature a lipid-enveloped hydrogel structure, provide such long-lasting hydration to the skin.     

Synthesis and co-ordination chemistry of tris(picolyl-2-carboxyamido-6-pyridyl) methanol: A ligand with a strong preference for trigonal prismatic geometries

The new tripodal ligand tris(picolyl-2-carboxyamido-6-pyridyl) methanol (L¹) has been synthesised via a Pd-catalysed amidocarbonylation reaction in good yield (64%). The ligand has been shown to readily form mononuclear complexes with both Fe(II) and Zn(II). Continuous Shape Mapping calculations have also been performed which confirm the ligands ability to enforce near-perfect trigonal prismatic co-ordination environments upon each of these metal ions.     

Preparation,surface state and band structure studies of SrTi(1 − x)Fe(x)O(3 − δ) (x = 0–1) perovskite-type nano structure by X-ray and ultraviolet photoelectron spectroscopy

In this report, SrTi_(1 ? x)Fe_(x)O_(3 ? δ) photocatalyst powder was synthesized by a high temperature solid state reaction method. The morphology, crystalline structures of obtained samples, was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscopy (TEM), respectively. The electronic properties and local structure of the perovskite STF_x (0 ≤ x ≤ 1) systems have been probed by extended X-ray absorption fine structure (EXAFS) spectroscopy. The effects of iron doping level x (x = 0–1) on the crystal structure and chemical state of the STF_x have been investigated by X-ray photoelectron spectroscopy and the valence band edges for electronic band gaps were obtained for STF_x by ultraviolet photoelectron spectroscopy (UPS). A single cubic perovskite phase of STF_x oxide was successfully obtained at 1200 °C for 24 h by the solid state reaction method. The XPS results showed that the iron present in the STF_x perovskite structure is composed of a mixture of Fe³⁺ and Fe⁴⁺ (SrTi_(1 ? x)[Fe³⁺, Fe⁴⁺]_(x)O_(3 ? δ)). When the content x of iron doping was increased, the amount of Fe³⁺ and Fe⁴⁺ increased significantly and the oxygen lattice decreased on the surface of STF_x oxide. The UPS data has confirmed that with more substitution of iron, the position of the valence band decreased.