Mixed matrix vanadium oxide catalytic nanocomposite membrane for styrene oxidation

Mesoporous nanocomposite membranes with vanadium oxide–carbon nanotubes (V_xO_y-CNTs) embedded in γ-Al₂O₃ were successfully synthesized using the dip coating method. The membranes were evaluated for styrene oxidation to determine the optimum styrene conversion and benzaldehyde selectivity. Several factors that influence the preparation of defect-free coatings, such as the type of binder, the binder addition time and surface support treatments, were investigated. The physico-chemical permeation properties of the membranes were characterized using scanning electron microscope, transmission electron microscope (TEM), X-ray Diffraction XRD, Nitrogen adsorption (BET) and Thermogravimetric TGA. Response surface methodology (RSM) was used to investigate the effects of oxidant (H₂O₂) concentration, temperature, contact time and catalyst loading on styrene conversion and the selectivity of benzaldehyde. Based on the RSM analysis, the optimal oxidation conditions included a reaction temperature of 45 °C, a differential pressure of 1.5 bars, a molar ratio of H₂O₂: styrene of 1.5:1 and a catalyst loading of 30 %. These conditions resulted in the maximal styrene conversion of 25.6 and 84.9 % benzaldehyde selectivity.     

A one-pot tandem synthesis of various 1,2-disubstituted benzimidazoles

A facile method to synthesize various 1,2-disubstituted benzimidazoles is developed. It is suggested that formation of a Meisenheimer adduct between the substrate, amine, and solvent aids the N-arylation process. The generality of the protocol is demonstrated by the efficient reactions involving numerous substituents ranging from electron-withdrawing groups to electron-donating groups.     

Investigation of viscoelastic focusing of particles and cells in a zigzag microchannel

Microfluidic particle focusing has been a vital prerequisite step in sample preparation for downstream particle separation, counting, detection, or analysis, and has attracted broad applications in biomedical and chemical areas. Besides all the active and passive focusing methods in Newtonian fluids, particle focusing in viscoelastic fluids has been attracting increasing interest because of its advantages induced by intrinsic fluid property. However, to achieve a well-defined focusing position, there is a need to extend channel lengths when focusing micrometer-sized or sub-microsized particles, which would result in the size increase of the microfluidic devices. This work investigated the sheathless viscoelastic focusing of particles and cells in a zigzag microfluidic channel. Benefit from the zigzag structure of the channel, the channel length and the footprint of the device can be reduced without sacrificing the focusing performance. In this work, the viscoelastic focusing, including the focusing of 10 μm polystyrene particles, 5 μm polystyrene particles, 5 μm magnetic particles, white blood cells (WBCs), red blood cells (RBCs), and cancer cells, were all demonstrated. Moreover, magnetophoretic separation of magnetic and nonmagnetic particles after viscoelastic pre-focusing was shown. This focusing technique has the potential to be used in a range of biomedical applications.     

Stable meso–meso‐Linked 2NH‐Corrole Radical Dimers as a Key Intermediate to Corrole Tape

While oxidation of 5,5′,15,15′‐tetramesityl‐10‐10′‐linked 3NH‐corrole dimer with DDQ gave the corresponding triply linked 2NH‐corrole tape, the use of an equimolar amount of p‐chloranil as a milder oxidant resulted in the formation of a 10‐10′‐linked neutral 2NH‐corrole radical dimer as a stable product. The stability of this peculiar product is ascribed largely to strong antiferromagnetic interaction of the two spins. Further oxidation of this diradical produced corrole tape, suggesting its involvement as a reaction intermediate to the corrole tape. Oxidation of 10‐10′‐linked bis‐pyridine‐coordinated Co^III corrole dimer with DDQ produced a cobalt corrole radical dimer and a doubly linked corrole dimer both as stable compounds bearing pyridine and cyanide axial ligands. This type of oxidative transformation involving neutral diradical intermediates is a unique reaction mechanism specific for corrole dimers.     

Health-Promoting Properties of Medicinal Mushrooms and Their Bioactive Compounds for the COVID-19 Era—An Appraisal: Do the Pro-Health Claims Measure Up?

Many mushroom species are consumed as food, while significant numbers are also utilised medicinally. Mushrooms are rich in nutrients and bioactive compounds. A growing body of in vitro, in vivo, and human research has revealed their therapeutic potentials, which include such properties as anti-pathogenic, antioxidant, anti-inflammatory, immunomodulatory, gut microbiota enhancement, and angiotensin-converting enzyme 2 specificity. The uses of medicinal mushrooms (MMs) as extracts in nutraceuticals and other functional food and health products are burgeoning. COVID-19 presents an opportunity to consider how, and if, specific MM compounds might be utilised therapeutically to mitigate associated risk factors, reduce disease severity, and support recovery. As vaccines become a mainstay, MMs may have the potential as an adjunct therapy to enhance immunity. In the context of COVID-19, this review explores current research about MMs to identify the key properties claimed to confer health benefits. Considered also are barriers or limitations that may impact general recommendations on MMs as therapy. It is contended that the extraction method used to isolate bioactive compounds must be a primary consideration for efficacious targeting of physiological endpoints. Mushrooms commonly available for culinary use and obtainable as a dietary supplement for medicinal purposes are included in this review. Specific properties related to these mushrooms have been considered due to their potential protective and mediating effects on human exposure to the SARS CoV-2 virus and the ensuing COVID-19 disease processes.     

Sampled-data output voltage regulation for a DC–DC buck converter nonlinear system with actuator and sensor failures

Nonlinear Dynamics - This paper considers the distributed adaptive neural consensus tracking control problem for a class of uncertain nonaffine nonlinear multi-agent systems. By making use of the...     

Adsorption of phosphate from seawater on calcined MgMn-layered double hydroxides

Adsorptive properties of MgMn-3-300 (MgMn-type layered double hydroxide with Mg/Mn mole ratio of 3, calcined at 300 degrees C) for phosphate were investigated in phosphate-enriched seawater with a concentration of 0.30 mg-P/dm3. It showed the highest phosphate uptake from the seawater among the inorganic adsorbents studied (hydrotalcite, calcined hydrotalcite, activated magnesia, hydrous aluminum oxide, manganese oxide (delta-MnO2)). The phosphate uptake by MgMn-3-300 reached 7.3 mg-P/g at an adsorbent/solution ratio of 0.05 g/2 dm3. The analyses of the uptakes of other constituents (Na+, K+, Ca(+, Cl-, and SO(2-)4) of seawater showed that the adsorbent had a markedly high selectivity for the adsorption of phosphate ions. Effects of initial phosphate concentration, temperature, pH, and salinity on phosphate uptake were investigated in detail by a batch method. The phosphate uptake increased slightly with an increase in the adsorption temperature. The adsorption isotherm followed Freundlich's equation with constants of logK(F)=1.25 and 1/n=0.65, indicating that it could effectively remove phosphate even from a solution of markedly low phosphate concentration as well as with large numbers of coexisting ions. The pH dependence showed a maximum phosphate uptake around pH 8.5. The pH dependence curve suggested that selective phosphate adsorption progresses mainly by the ion exchange of HPO(2-)4. The study on the effect of salinity suggested the presence of two kinds of adsorption sites in the adsorbent: one nonspecific site with weak interaction and one specific site with strong interaction. The effective desorption of phosphate could be achieved using a mixed solution of 5 M NaCl + 0.1 M NaOH (1 M = 1 mol/dm3), with negligible dissolution of adsorbent. The adsorbent had high chemical stability against the adsorption/desorption cycle; it kept a good phosphate uptake even after the repetition of the seventh cycle.     

Triply Linked Corrole Dimers

The oxidation of 10–10′ singly linked corrole dimers with DDQ at low concentration in CHCl₃ afforded meso–meso, β–β, β–β triply linked 2H‐corrole dimers (with two inner NH groups in each corrole unit), which exhibited characteristic ¹H NMR and absorption spectra attributable to their nonaromatic electronic networks. These 2H‐corrole dimers were reduced with NaBH₄ to aromatic 3H‐corrole dimers, which were unstable and easily oxidized back to the 2H‐corrole dimers upon exposure to air. Bis(zinc(II)) complexes of the 2H‐corrole dimers were synthesized and characterized as rare examples of nonaromatic zinc(II) corrole complexes.