Accelerated formation of the boron–oxygen complex in p‐type Czochralski silicon

This Letter reports on the acceleration of the rate of formation of the boron–oxygen defect in p‐type Czochralski silicon with illumination intensities in excess of 2.1 × 10¹⁷ photons/cm²/s. It is observed that increased light intensities greatly enhance the rate of defect formation, without increasing the saturation concentration of the defect. These results suggest a dependence of the defect formation rate upon the total majority carrier concentration. Finally, a method using temperatures up to 475 K and an illumination intensity of 1.68 × 10¹⁹ photons/cm²/s is shown to result in near‐complete defect formation within seconds. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Stereocontrolled Synthesis of 1,5‐Stereogenic Centers through Three‐Carbon Homologation of Boronic Esters

Allylic pinacol boronic esters are stable toward 1,3‐borotropic rearrangement. We developed a Pd^II‐mediated isomerization process that gives di‐ or trisubstituted allylic boronic esters with high E selectivity. The combination of this method with lithiation–borylation enables the synthesis of carbon chains that bear 1,5‐stereogenic centers. The utility of this method has been demonstrated in a formal synthesis of (+)‐jasplakinolide.     

Surface Design for Immobilization of an Antimicrobial Peptide Mimic for Efficient Anti-Biofouling

Microbial surface attachment negatively impacts a wide range of devices from water purification membranes to biomedical implants. Mimics of antimicrobial peptides (AMPs) constituted from poly(N-substituted glycine) „peptoids“ are of great interest as they resist proteolysis and can inhibit a wide spectrum of microbes. We investigate how terminal modification of a peptoid AMP-mimic and its surface immobilization affect antimicrobial activity. We also demonstrate a convenient surface modification strategy for enabling alkyne–azide „click“ coupling on amino-functionalized surfaces. Our results verified that the N- and C-terminal peptoid structures are not required for antimicrobial activity. Moreover, our peptoid immobilization density and choice of PEG tether resulted in a „volumetric“ spatial separation between AMPs that, compared to past studies, enabled the highest AMP surface activity relative to bacterial attachment. Our analysis suggests the importance of spatial flexibility for membrane activity and that AMP separation may be a controlling parameter for optimizing surface anti-biofouling.     

Cooperativity of Catechols and Amines in High‐Performance Dry/Wet Adhesives

The outstanding adhesive performance of mussel byssal threads has inspired materials scientists over the past few decades. Exploiting the amino‐catechol synergy, polymeric pressure‐sensitive adhesives (PSAs) have now been synthesized by copolymerizing traditional PSA monomers, butyl acrylate and acrylic acid, with mussel‐inspired lysine‐ and aromatic‐rich monomers. The consequences of decoupling amino and catechol moieties from each other were compared (that is, incorporated as separate monomers) against a monomer architecture in which the catechol and amine were coupled together in a fixed orientation in the monomer side chain. Adhesion assays were used to probe performance at the molecular, microscopic, and macroscopic levels by a combination of AFM‐assisted force spectroscopy, peel and static shear adhesion. Coupling of catechols and amines in the same monomer side chain produced optimal cooperative effects in improving the macroscopic adhesion performance.     

Comparison of rigid and flexible simple point charge water models at supercritical conditions

This study investigates the differences between the predictions of various properties of rigid and flexible simple point charge water models at supercritical conditions. Molecular dynamics simulations were conducted for supercritical water in a temperature range of 773–1073 K and densities in the range 115–659 kg/m³. We present thermodynamic data, pair correlation functions, self-diffusivity, power spectra, dielectric constants, and variaous measures of hydrogen bonding at different state conditions. The flexible water model performs better in predicting the pressures along the supercritical isotherms simulated. Agreement between experimental and calculated dielectric constants is superior for the flexible water model, particularly at high densities. The flexible model exhibits a greater degree of hydrogen bonding and more persistent hydrogen bonds than does the rigid model. The structural features of supercritical water at high densities are identical for the two water models. At low densities, however, the flexible potential exhibits pair correlation functions with enhanced peaks. Inclusion of flexibility in the potential model does not result in a significant shift in the position of the rotational/librational peak in the power spectrum. The self-diffusivities obtained from the simulations are within the accuracy of the experimental values for both the rigid and flexible models. On balance the inclusion of flexibility improves agreement with the properties of real supercritical water while incurring little or no additional computational burden. © 1996 by John Wiley & Sons, Inc.     

Recasting the (Synchrosqueezed) Short-Time Fourier Transform as an Instantaneous Spectrum

In a previous work, we proposed a time-frequency analysis called instantaneous spectral analysis (ISA), which generalizes the notion of the Fourier spectrum and in which instantaneous frequency is utilized to the fullest extent. In this paper, we recast both the Fourier transform (FT) and filterbank (FB) interpretations of the short-time Fourier transform (STFT) as instantaneous spectra. We show that to recast the FB interpretation of STFT as an instantaneous spectrum with valid structure, frequency reassignment is a fundamental necessity, thus demonstrating that this IS is closely related to the synchrosqueezed STFT. This result provides a new theoretical motivation for the synchrosqueezed STFT. Finally, we illustrate through example the instantaneous spectra corresponding to the FT and FB interpretations of STFT using two closed-form examples.     

Isomer-specific influences on the composition of reaction intermediates in dimethyl ether/propene and ethanol/propene flame

This work provides experimental evidence on how the molecular compositions of fuel-rich low-pressure premixed flames are influenced as the oxygenates dimethyl ether (DME) or ethanol are incrementally blended into the propene fuel. Ten different flames with a carbon-to-oxygen ratio of 0.5, ranging from 100% propene (phi = 1.5) to 100% oxygenated fuel (phi = 2.0), are analyzed with flame-sampling molecular-beam mass spectrometry employing electron- or photoionization. Absolute mole fraction profiles for flame species with masses ranging from m/z = 2 (H2) to m/z = 80 (C6H8) are analyzed with particular emphasis on the formation of harmful emissions. Fuel-specific destruction pathways, likely to be initiated by hydrogen abstraction, appear to lead to benzene from propene combustion and to formaldehyde and acetaldehyde through DME and ethanol combustion, respectively. While the concentration of acetaldehyde increases 10-fold as propene is substituted by ethanol, it decreases as propene is replaced with DME. In contrast, the formaldehyde concentration rises only slightly with ethanol replacement but increases markedly with addition of DME. Allyl and propargyl radicals, the dominant precursors for benzene formation, are likely to be produced directly from propene decomposition or via allene and propyne. Benzene formation through propargyl radicals formed via unsaturated C2 intermediates in the decomposition of DME and ethanol is negligibly small. As a consequence, DME and ethanol addition lead to similar reductions of the benzene concentration.     

Er∶Yb∶YCOB晶体制备及其激光二极管抽运激光特性

研究了Er∶Yb∶YCa4O(BO3)3(简称Er∶Yb∶YCOB)的多晶制备和单晶生长,用提拉法生长出光学质量优良的Er∶Yb∶YCOB单晶,测量了其吸收光谱和荧光光谱,分析了其能级和泵浦原理,并进行了以激光二极管为抽运源的激光试验,实现了Er∶Yb∶YCOB晶体的在1.55μm附近110mW的激光输出,且斜效率达18.9;.     

Use of a small particle solid‐core packing for improved efficiency and rapid measurement of sirolimus and everolimus by LC‐MS/MS

Measurement of whole blood sirolimus and everolimus is required in order to optimize patient treatment following solid organ transplant. Assay by LC‐MS/MS is increasingly preferred; however efficient use of the instrument and short turnaround times are crucial. Use of a 1.6 µm solid‐core packing HPLC column (Cortecs) gave significant increases in efficiency, sensitivity and throughput compared with an existing method, following simple protein precipitation of small‐volume (20 μL) whole blood samples. Sirolimus, everolimus and the stable isotopic internal standard (¹³C₂D₄ – everolimus) eluted at around 0.8 min, and total analytical run time was 2.2 min, saving almost 4 min per sample compared with an existing method. Within‐assay imprecision (CV) was 3.3–8.5%, and between‐assay imprecision was 2.2–10.8%. Retrospective assay of external quality assurance samples and comparison of patient samples assayed in parallel showed only small differences (between +6.8 and ?1.9%) in results using the Cortecs column when compared with the existing method. No significant interferences or ion suppression were observed. Copyright © 2015 John Wiley & Sons, Ltd.