Evaluation of interfacial toughness curve of bimaterial in submicron scale

A novel method combining the experimental data at only two different mixed mode fractures and an empirical interface toughness function has been proposed to establish the interfacial toughness function of a bimaterial in submicron scale. The modified four-point bend specimen was used in experiment to evaluate the first type of mixed mode fracture, while the sandwiched cantilever specimen was employed to get the second one. An empirical interface toughness function reflecting quite accurately the delamination behavior was adopted as a typical one. The obtained results investigated that the proposed method could be used to calibrate not only the interfacial fracture criteria at pure modes but also at any mixed mode fracture of bimaterials in submicron scale.     

Dimesogenic liquid crystal consisting of cholesterol and Schiff base moieties: dependence of LC properties on the spacer length and fluorination of the alkoxy tails

The liquid crystalline properties of two series of non‐symmetric liquid crystal dimers consisting of cholesterol and Schiff base moieties interconnected by ω‐oxyalkanoyl spacers of varying length are compared: one series (SBOC‐ n ) carry the octyloxy tail on the Schiff base mesogen, and the other (SBOF‐ n ) a perfluoroheptylmethyloxy tail. In general, compounds with the fluorinated alkoxy tail exhibited mesophases over a much wider temperature range than those with the alkoxy tail. The latter series favoured the formation of more diverse mesophases than the former. SBOC‐4, ‐5 and ‐7, and SBOF‐4, ‐5 and ‐10 formed the chiral smectic C phase.     

Improved Compatibility of Styrene-Maleic Anhydride Copolymer/Polyethylene Blends Through Reactive Mixing

Abstract

To improve the compatibility of styrene-maleic anhydride copolymer/low density polyethylene (SMA/LDPE) blends, LDPE grafted with 2-hydroxyethyl methacrylate-isophorone diisocyanate (LDPE-g-HI) was prepared and blended with SMA of which anhydride was converted to carboxylic acid (SMAAc). The infrared spectra of LDPE-g-HI established the presence of isocyanate group. In the blend morphology, some adhesions between the two phases and much finer dispersions were observed in the SMAAc/LDPE-g-HI blends, indicating that chemical reactions took place during the melt blending. The lower heat capacity change at the glass transition temperature demonstrated that chemical bonds were produced in the SMAAc/LDPE-g-HI blends. From the results of the rheological test, it was found that strong positive deviation from the mixing rule occurred in viscosity for the SMAAc/LDPE-g-HI blends, concerning with good adhesion and finer dispersions. In the measurement of tensile property, the improved mechanical properties for the SMAAc/LDPE-g-HI blends were shown.     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092     

Unexpected formation of dinaphthoaza-17-crown-5 ether containing γ-aminopiperidine subunit

1. Download : Download high-res image (90KB)
2. Download : Download full-size image

     

Necessary and Sufficient Conditions for Efficiency Via Convexificators

Based on the extended Ljusternik Theorem by Jiménez-Novo, necessary conditions for weak Pareto minimum of multiobjective programming problems involving inequality, equality and set constraints in terms of convexificators are established. Under assumptions on generalized convexity, necessary conditions for weak Pareto minimum become sufficient conditions.     

Applicability of in situ detectors for radiological assessment of strontium-90 in rivers and lakes

Journal of Radioanalytical and Nuclear Chemistry - An in situ detector for radiological assessments of strontium-90 (90Sr) in river and lake water is developed, based on a CaF2(Eu) scintillator,...     

Redox‐responsive core cross‐linked micelles of poly(ethylene oxide)‐b‐poly(furfuryl methacrylate) by Diels‐Alder reaction for doxorubicin release

Redox‐responsive core cross‐linked (CCL) micelles of poly(ethylene oxide)‐b‐poly(furfuryl methacrylate) (PEO‐b‐PFMA) block copolymers were prepared by the Diels‐Alder click‐type reaction. First, the PEO‐b‐PFMA amphiphilic block copolymer was synthesized by the reversible addition‐fragmentation chain transfer polymerization. The hydrophobic blocks of PFMA were employed to encapsulate the doxorubicin (DOX) drug, and they were cross‐linked using dithiobismaleimidoethane at 60 °C without any catalyst. Under physiological circumstance, the CCL micelles demonstrated the enhanced structural stability of the micelles, whereas dissociation of the micelles took place rapidly through the breaking of disulfide bonds in the cross‐linking linkages under reduction environment. The core‐cross‐linked micelles showed fine spherical distribution with hydrodynamic diameter of 68 ± 2.9  nm. The in vitro drug release profiles presented a slight release of DOX at pH 7.4, while a significant release of DOX was observed at pH 5.0 in the presence of 1,4‐dithiothreitol. MTT assays demonstrated that the block copolymer did not have any practically cytotoxicity against the normal HEK293 cell line while DOX‐loaded CCL micelles exhibited a high antitumor activity towards HepG2 cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3741–3750