Alkylation of 2‐pyridinones: Synthesis of novel acyclonucleosides

This paper presents the synthesis of some novel acyclonucleosides containing 2‐pyridinones and 2‐hydroxyethoxymethyl, 2,3‐dihydroxy‐propyl side chain. The tosylate of these nucleosides analogues could be modified to azido derivatives. Also, acyclonucleosides with 1‐ethoxymethyl, 1‐benzyloxymethyl, 1‐methylthiomethy 1 and 2‐hydroxyethyl side chains have been investigated. The O‐alkylated pyridine derivatives were obtained during most reactions.     

A study of method robustness for arsenic speciation in drinking water samples by anion exchange HPLC-ICP-MS

Regulating arsenic species in drinking waters is a reasonable objective, since the various species have different toxicological impacts. However, developing robust and sensitive speciation methods is mandatory prior to any such regulations. Numerous arsenic speciation publications exist, but the question of robustness or ruggedness for a regulatory method has not been fully explored. The present work illustrates the use of anion exchange chromatography coupled to ICP-MS with a commercially available "speciation kit" option. The mobile phase containing 2 mM NaH(2)PO(4) and 0.2 mM EDTA at pH 6 allowed adequate separation of four As species (As(III), As(V), MMAA, DMAA) in less than 10 min. The analytical performance characteristics studied, including method detection limits (lower than 100 ng L(-1) for all the species evaluated), proved the suitability of the method to fulfill the current regulation. Other parameters evaluated such as laboratory fortified blanks, spiked recoveries, and reproducibility over a certain period of time produced adequate results. The samples analyzed were taken from water utilities in different areas of the United States and were provided by the U.S. EPA. The data suggests the speciation setup performs to U.S. EPA specifications but sample treatment and chemistry are also important factors for achieving good recoveries for samples spiked with As(III) as arsenite and As(V) as arsenate.     

Very-large-volume sampling of water in gas chromatography using the through oven transfer adsorption desorption (TOTAD) interface for pesticide-residue analysis

The Through Oven Transfer Adsorption Desorption (TOTAD) interface is used to directly introduce large volumes of water (1 mL or more) into a capillary gas chromatograph. The TOTAD interface is a greatly modified programmed temperature vaporizer injector incorporating changes that affect the pneumatics, sample introduction, solvent elimination, and operation mode. The system can easily be automated. The technique is applied to the analysis of pesticide residue in standard solutions and real water samples from the Ebro River (northeastern Spain). The speed of sample introduction was 1 mL/min, and the solvent elimination was almost complete. A nitrogen phosphorous detector is used, and the relative standard deviation varied from 5.7% to 11.7% for the absolute peak areas. The sensitivity achieved by introducing 1 mL of the sample is sufficient for most pesticide-residue analyses in water. The limits of detection ranged from 0.5 to 8.1 ng/L.     

Ring-opening Sn2'' reactions of 7-oxanorbornenes by organolithium reagents. Regio- and stereospecific synthesis of substituted cyclohexenediols

The nucleophilic Sn2' bridge opening of 7-oxabicyclo[2.2.1] hept-5-en-2-ols with organolithium reagents occurs in a regio- and stereospecific fashion to produce 6-substituted-cyclohex-4-en-1,3-diols, regardless of the stereochemistry at C-2. A free alcohol functionality is necessary to attain complete regiocontrol of the process. The methodology is utilized to prepare an optically pure cyclohexene derivative, (+)-(1S,3S,6R)-6-n-butyl-3-methyl-cyclohex-4-en-1,3-diol (5b), as a model system.     

Molecular orbital study of molecular nitrogen fixation

The model systems of molecular nitrogen fixation [N₂ + H]?, [N₂ + H]⁺, [N₂ + H]^?, [N₂ + H₂], [N₂ + H₂]⁺, and [N₂ + H₂]^? were studied by the semiempirical INDO method. The study was based on the formal analogy between the catalytic reactions and the photochemical, radical, and ionic reactions on the other side. Symmetrical and donor-acceptor properties of necessary catalytic systems were proposed using the dependence of energy characteristics and electron structure on reaction coordinate. On the basis of this MO study we have proposed the appropriate symmetry types of catalysts for each of acceptable models of nitrogen fixation. For one of the proposed systems there was realised a model MO computation with explicit inclusion of atoms of transition metals (Fe, V).     

Synthese von Trimethyl- und Triphenylsulfonium-Cyanometallaten

Two cyano complexes of the type [R ₃S]₂ [Pd(CN)₄] (R ₃S⁺=Me ₃S⁺,Ph ₃S⁺ cations) were prepared. The identity of the obtained samples was verified by chemical analysis and investigated by IR-spectroscopy. Thev _CN stretching frequencies of the complexes were compared with similar frequencies of the corresponding alkaline cyano complex. The thermal decomposition of the compounds was examined.     

New polycyclic diamine scaffolds from dimerization of 3-alkyl-1,4-dihydropyridines in acidic medium

[reaction: see text] 3-Alkyl-1,4-dihydropyridines dimerize in acidic medium, at low temperature, to give polycyclic imminium salts derivatives that were reduced to afford new polycyclic diamine scaffolds. The reaction can be extended to enantiopure series starting from R-(+)- or S-(-)-1-phenylethylamine. Long exposure of the polycyclic imminium salt intermediates to air moisture at 20 degrees C resulted in formation of new amide derivatives. This is probably due to the addition of water followed by an intramolecular oxido-reduction process.     

Chemical Constituents of Ailanthus triphysa

Two new compounds,8(14),15-isopimaradiene-2α，３α，19-triol(1),and 6α，７β－dihydroxy-17(20)-cis-5α－pregna-16-one(2),together with four known copounds,a oxygenated rare phyllocladane,phyllocladan-16α，19-diol(3),kaempferol-3-0-β－Ｄ-galactopyranosied,kaempferol-3-0-α－Ｌ－rhamnopyranoside and scopoletin, were isolated from the leaves of Ailanthus tripysa.Structures of 1-3 were elucidated on the basis of spectroscopic data as compared with related compounds.     

Comparison of different derivatization approaches for mercury speciation in biological tissues by gas chromatography/inductively coupled plasma mass spectrometry

A novel interface design for coupling gas chromatography and inductively coupled plasma mass spectrometry (GC/ICP-MS) was used to perform mercury speciation in biological tissues. Three derivatization approaches were optimized and compared for this purpose: anhydrous butylation using a Grignard reagent, aqueous ethylation by means of NaEt(4)B and aqueous propylation with NaPr(4)B. The last reagent was synthesized in the laboratory as it is not commercially available. Detection limits obtained by GC/ICP-MS ranged between 100 and 200 fg (as absolute mass) for methylmercury and between 500 and 600 fg for inorganic mercury using a 1 microl injection. Quantification of methyl- and inorganic mercury was carried out by resorting to aqueous calibration, using ethylmercury as internal standard for both propylation and butylation derivatization techniques. For ethylation procedures, a methylpropylmercury solution was used as internal standard. The absence of transmethylation during sample preparation was checked using a 97% enriched (202)Hg inorganic standard. The accuracy of the three derivatization approaches was evaluated by the analysis of the certified reference material DOLT-2 (dogfish liver) from the National Research Council of Canada and certified for methylmercury, with satisfactory results.     

High Performance Varistor Discs Obtained from Chemically Synthesized Doped Zinc Oxide Powder

The ceramic microstructure, the chemical homogeneity of specific dopants and the mechanical integrity of a varistor disc are critical parameters in determining the transient voltage suppression features of these devices. The material properties and overall quality of the starting ceramic powders used to produce such components are essential in achieving the desired properties. The present work describes a novel chemical method developed to produce doped zinc oxide powders and an industrial scale manufacturing process for the production of final varistor blocks for surge arrester applications. The results are compared with those obtained when using standard varistor powder made by the mixed oxide route is used. All the fundamental electrical properties of the discs have been determined and correlated with the relevant manufacturing steps.