Trace-Level Determination of Phenol by Liquid Chromatography with On-Line Precolumn Technology and Fluorescence Detection

Abstract

A strongly basic anion-exchange resin is used for the trace enrichment and automated sample handling of phenol, with subsequent determination by reversed-phase liquid chromatography with fluorescence detection. Because of the presence of high concentrations of ionic compounds in the water samples tested, phenol is first trapped on a relatively long precolumn filled with a highly hydrophobic packing material; during this step, (in) organic anions which are not retained, are flushed to waste. In the next step, phenol is desorbed from this column at high pH and sorbed in a small zone (“peak compression”) on a short precolumn containing the anion exchanger.

In the analysis of tap and river water samples, the detection limit was found to be 10ppt (1:10¹¹).     

Effective moment of inertia in132Ce,134Nd and136Nd

The effective moment of inertiaI _eff ⁽²⁾ of¹³²Ce,¹³⁴Nd and¹³⁶Nd produced in⁴⁰Ar induced reactions has been deduced from continuumγ-ray spectra measured by sum spectrometer methods. Results concerning the deformation of these nuclei are obtained by comparison of the experimental data and calculations in the frame of a cranking Nilsson — Strutinsky model.     

Electrical and infrared dielectrical properties of silica aerogels and of silica-aerogel-based composites

In this contribution we have studied the key electrical parameters of silica aerogels and of silica-aerogel-based composites, namely the dielectric constants , the dielectric losses tan (at 1 kHz), and the breakdown fields E _b (at 50 Hz). For low-density bulk silica aerogels we find =1.25 and tan =0.0005. E _b is about 500 kV/cm in quasi-homogeneous fields, and of the order of MV/cm in strongly inhomogeneous fields. The dielectric constants of partially densified aerogels increase linearly with density; their dielectric losses are relatively large and their breakdown fields are comparativiely low. The same results are found for aerogels in the form of settled materials, i.e. aerogel granules and powders in air. Acrylate-based aerogel composites with volume fractions larger than 70% have low dielectric constants but their losses are at least 10 times higher than those of low-density aerogels. These materials sustain high local fields in the MV/cm region, while in quasihomogeneous fields, breakdown occurs at about 100 kV/cm. Based on the present results and the interplay with other physical properties (low mechanical resistance, low thermal conductivity, adsorption of water, etc.), silica aerogels and silica aerogel-acrylate-based composites are predicted to have a low potential for electrical insulation.     

O(N) vector model with twisted boundary conditions

Prompted by a recent article of Chakravarty, we reexamine theO(N) vector model with twisted boundary conditions ind dimensions in the various frameworks of the =d–2 expansion, the =4–d expansion, and the large-N expansion. These continuum models describe the physics below the critical temperatureT _c and nearT _c of a latticeO(N) spin model. We determine the effect of the twisting on finite-size scaling functions, for various geometries.On leave from G. Nadjakov Institute of Solid State Physics, 1784 Sofia, Bulgaria.     

Modeling of dye-sensitized titanium dioxide solar cells

The system TiO₂–photo sensitive dye of a dye-sensitized TiO₂ solar cell is numerically simulated. The steady-state numerical model used is based on the continuity and transport equations for all charge species involved in the system, in connection to Poisson’s equation. The dependence of both electron diffusion coefficient and light absorbance upon TiO₂ porosity is taken into consideration. The resulting electron density after illumination is also set as a function of the illuminating beam characteristics and material properties. Furthermore, an effective dielectric constant dependent upon the porosity of TiO₂ is used in the model. Results for different values of pore size and thickness of the TiO₂ electrode are found in accordance with results reported in the literature. Paper presented at the 11th EuroConference on the Science and Technology of Ionics, Batz-sur-Mer, Sept. 9–15, 2007. An erratum to this article can be found at     

Search for direct photons from S-Au collisions at 200 GeV/nucleon

The CERES experiment has measured inclusive photon production in S-Au collisions of 200 GeV/nucleon at the CERN SPS. No evidence for direct emission of photons was found. For the kinematic region 2.1<y<2.65 and 0.4 GeV/c<p??<2.0 GeV/c the yield andp??-dependence of the observed photons are well reproduced by hadron decays. Furthermore, their production rate is found to be proportional to the charged particle density. The systematic errors comparing the measured and expected photon yield result in an upper limit of 14% for the emission of direct photons in central S-Au collisions. For a photon source with a yield depending quadratically on the charged particle density the limit can be reduced to 7%.     

Levels of233Pa excited in helium-induced single-proton transfer reactions

The²³³Th(³He,d)²³³Pa and²³³Th(α, t)²³³Pa reactions were studied with 28.5-MeV³He and 30-MeV α-particles, respectively. The reaction results are interpreted in terms of a distorted-wave Born-approximation analysis. Transferred angular momenta are deduced from (α, t) and (³He,d) cross-section ratios,R=dσ(α, t)/dσ(³He,d). Theoretical cross sections, calculated in the framework of the Nilsson model with pairing and Coriolis interactions included, are in reasonable agreement with experiment. Rotational bands built on the following Nilsson proton configurations are identified in²³³Pa: 1/2_?[530↑], 3/2⁺[651↑], 1/2⁺[660↑], 5/2⁺[642↑], 5/2_?[5231↓], and 3/2_?[521↑].     

Turbulent flame visualization using direct numerical simulation

Combustion phenomena are of high scientific and technological interest, in particular for energy generation and transportation systems. Direct Numerical Simulations (DNS) have become an essential and well established research tool to investigate the structure of turbulent flames, since they do not rely on any approximate turbulence models. In this work two complementary DNS codes are employed to investigate different types of fuels and flame configurations. The code is π³ is a 3-dimensional DNS code using a low-Mach number approximation. Chemistry is described through a tabulation, using two coordinates to enter a database constructed for example with 29 species and 141 reactions for methane combustion. It is used here to investigate the growth of a turbulent premixed flame in a methane-air mixture (Case 1). The second code,Sider is an explicit three-dimensional DNS code solving the fully compressible reactive Navier-Stokes equations, where the chemical processes are computed using a complete reaction scheme, taking into account accurate diffusion properties. It is used here to compute a hydrogen/air turbulent diffusion flame (Case 2), considering 9 chemical species and 38 chemical reactions.