1H-NMR Relaxation of Water Molecules in the Aqueous Microcrystalline Cellulose Suspension Systems and Their Viscosity

An intensive study for aqueous microcrystalline cellulose (MCC) suspensions was carried out in view of the relationship between a viscosity and a 1H spin-spin relaxation time (T2) of water. An investigation was carried out for four suspension systems with the different particle size distributions. The proton mole ratio () of bound water against MCC particles and T2 of bound water (T2,b) were evaluated from the T2 values obtained by Carr-Purcell- Meiboom-Gill (C.P.M.G) method and those by solid echo method, respectively. As a result of these analyses, the T2,b value for the aqueous MCC suspension was evaluated as 5 × 10–3 s and it was found that the system having a larger tended to show a higher viscosity. By relating the above results to the observation of the suspensions by an optical microscope, it was concluded that a network formed by MCC particles plays an important role in generating a high viscosity of MCC suspension, and that an averaged mobility of water molecules is sensitively affected by the network structure.     

Preparation and biological activity of 2-[4-(thiazol-2-yl)phenyl]propionic acid derivatives inhibiting cyclooxygenase.

A series of 2-[4-(thiazol-2-yl)phenyl]propionic acids substituted at various positions were prepared by the reaction of diethyl 2-methyl-2-(4-thiocarbamoylphenyl)malonates with alpha-bromoaldehyde diethyl acetals or alpha-haloketones followed by hydrolysis of esters. The inhibition of prostaglandin H synthetase (cyclooxygenase) was assayed by use of an enzyme preparation from guinea pig polymorphonuclear leukocytes. Examination of the structure-activity relationship of these compounds indicated that the substitution pattern with halogens at position 3 (R1) of the benzene ring and a methyl group in position 4 (R2) and/or 5 (R3) of the thiazole ring were favorable for inhibitory activity. The compounds bearing bulky alkyl or polar functional groups at the R2 position were weak inhibitors. The potent inhibitors of cyclooxygenase were tested for their ability to reduce carrageenin-induced inflammation of rat paws. These derivatives had strong anti-inflammatory activity based on their strong inhibition of cyclooxygenase, with some exceptions, including those with a thiomethyl group at R1.     

Structure refinement and chemical analysis of Cs3Li(DSO4)4, formerly ‘Cs1.5Li1.5D(SO4)2’

An accurate structure refinement of the deuterated analog of the cesium lithium acid sulfate, formerly identified as ‘Cs_1.5Li_1.5H(SO₄)₂’, has been carried out using neutron diffraction methods. Like the protonated material reported earlier (Merinov et al., Solid State Ionics 69 (1994) 53), the compound is cubic, , however, the correct stoichiometry is Cs₃Li(DSO₄)₄. There are four formula units per unit cell and six atoms in the asymmetric unit. The lattice constant measured in this work is a=11.743(2) Å, comparable to the earlier results. The structure contains one disordered hydrogen bond, formed between O(2) atoms and located on two of the edges of the single LiO₄ tetrahedron. The Li site occupancy is , as is that of the deuterium site. This level of site occupancies is consistent with a structure in which hydrogen bonds are formed only when the lithium site is unoccupied, and explains the otherwise close proximity of the Li and D atoms, 1.394(10) Å. This unusual structural feature furthermore leads to a fixed stoichiometry, as confirmed here by chemical analysis of both the deuterated and protonated materials, despite the partial occupancy of the lithium and deuterium (hydrogen) atom sites.     

Interaction between dyes and polyelectrolytes. XIII. Effect of dye aggregation on the excitation energy transfer between bound dyes

Effect of polyanions on the aggregation of methylene blue (MB) was investigated spectrophotometrically. The following polyanions were used: potassium poly(vinyl sulfate), potassium poly(styrenesulfonate), sodium poly(methacrylate), and sodium poly(acrylate). The state of aggregation was largely dependent on the kind of polyanion and polyanion-MB ratio. MB-photo-sensitized isomerization of cis-p-(phenylazo)phenyltrimethylammonium iodide(cis-PTA) to the transisomer was used advantageously to investigate the effect of dye aggregation on the triplet excitation energy transfer between cationic dyes bound to polyanions. Although the efficiency of the excitation energy transfer between MB and cis-PTA was enhanced by the addition of polyanions, the formation of highly aggregated MB reduced the efficiency of the excitation energy transfer. Correlation with the dye aggregation induced by polyanions and the efficiency of excitation energy transfer between dyes was discussed.     

Dehydrogenation of ethylbenzene with CO2 over Cr-MCM-41 catalyst

M-MCM-41 catalysts (M: V, Cr, Fe, and Ga) prepared by direct hydrothermal synthesis (DHT) have been tested for dehydrogenation of ethylbenzene with CO₂. The synthesized materials were characterized by X-ray diffraction (XRD), N₂ adsorption (77 K), and diffuse reflectance UV–vis spectroscopic measurements. Cr-MCM-41 showed the highest activity among M-MCM-41 catalysts tested, resulting in the production of styrene with the conversion of 65% and the selectivity above 90%. The rate of styrene formation increased with increasing Cr loading up to 1.7 wt.%. It is suggested that Cr(VI)O₄ in tetrahedral coordination is formed as an active monochromate species and reduced to Cr(III)O₆ in octahedral coordination as a less active polychromate species during the reaction. Deactivated catalyst was regenerated by a treatment with gaseous oxygen or CO₂, during which redistribution as well as reoxidation of polymeric Cr(III)O₆ octahedra to monomeric Cr(VI)O₄ tetrahedra was observed. The rate of CO formation increased together with that of styrene formation, while the rate of H₂ formation decreased, with increasing partial pressure of CO₂. It was confirmed that reverse water-gas shift reaction took place over Cr-MCM-41 by a separate experiment. The rate of CO formation during the dehydrogenation of ethylbenzene with CO₂ over Cr-MCM-41 was well accounted for by assuming parallel occurrence of two reactions, i.e., direct oxidative dehydrogenation of ethylbenzene with CO₂ and simple dehydrogenation of ethylbenzene thermodynamically assisted by reverse water-gas shift reaction.     

Effect of various halide salts on the incompatibility of cyanocobalamin and ascorbic acid in aqueous solution

Combination of cyanocobalamin (VB12) and ascorbic acid (VC) has been widely seen in pharmaceutical products and dietary supplements. However, VB12 has been reported that its behavior in stability in aqueous solution is quite different when VC is mixed. In the present study, we examined the stabilities of these vitamins in acetate buffer (pH 4.8) using high performance liquid chromatography. Degradation of VB12 was not observed in the absence of VC in the buffer. However, when VC was mixed in the VB12 solution, VB12 concentrations decreased in accordance with VC degradation. VB12 and VC degradations were inhibited by adding sodium halides to acetate buffer at pH 4.8. These stabilization effects were also observed in the range from pH 3.5 to 5.3 and by adding potassium, magnesium, and calcium halides. Furthermore, our data demonstrated that increases in the halide anion concentrations and atomic number (Cl-相似文献   

Marginal electron density and density-difference functions

Summary For visual analysis of the density reorganization and distortion, the one-dimensional cut (x, y ₀,z ₀) and the two-dimensional cut (x, y, z ₀) of the three-dimensional electron density difference function (x, y, z) are frequently employed. However, these cut functions do not satisfy any sum rules in contrast to the original difference function (x, y, z). To avoid this difficulty, the use of the marginal electron density functions _x (x) and _xy (x, y) and their difference functions _x (x) and _xy (x, y) is proposed. The marginal densities are condensation of the three-dimensional density onto a particular plane or line of our interest, and they satisfy the sum rule (i.e., the conservation of the number of electrons) exactly. Some basic properties of the marginal electron density are clarified for typical diatomic molecular orbitals. An illustrative application is given for the bonding and antibonding processes in the H₂ system.     

Self-assembly patterning of silica colloidal crystals

We developed a self-assembly process of silica particles to fabricate desired patterns of colloidal crystals having high feature edge acuity and high regularity. A micropattern of colloidal methanol prepared on a self-assembled monolayer in hexane was used as a mold for particle patterning, and slow dissolution of methanol into hexane caused shrinkage of molds to form micropatterns of close-packed SiO2 particle assemblies. This result is a step toward the realization ofnano/micro periodic structures for next-generation photonic devices by a self-assembly process.     

NMR assignment methods for the aromatic ring resonances of phenylalanine and tyrosine residues in proteins

The unambiguous assignment of the aromatic ring resonances in proteins has been severely hampered by the inherently poor sensitivities of the currently available methodologies developed for uniformly 13C/15N-labeled proteins. Especially, the small chemical shift differences between aromatic ring carbons and protons for phenylalanine residues in proteins have prevented the selective observation and unambiguous assignment of each signal. We have solved all of the difficulties due to the tightly coupled spin systems by preparing regio-/stereoselectively 13C/2H/15N-labeled phenylalanine (Phe) and tyrosine (Tyr) to avoid the presence of directly connected 13C-1H pairs in the aromatic rings. The superiority of the new labeling schemes for the assignment of aromatic ring signals is clearly demonstrated for a 17 kDa calcium binding protein, calmodulin.