Amphoteric poly(vinyl alcohol) gel as a force generator: Observation of microporous gel formation with cryo-SEM

Amphoteric PVA hydrogels were made from mixed aqueous solutions of poly(acrylic acid), poly(allylamine) hydrochloride and poly(vinyl alcohol) by repetitive freezing and thawing. The hydrogen bond induced gelation produced an elastic and tough microporous hydrogel which generated tension as high as 0.3MPa corresponding to the solvent exchange from water to acetone. In this paper we show the microscopic structure of hydrogels determined by means of cryo-SEM technique and X-ray analysis.     

Crystal structure and high-pressure properties of γ-Mo2N determined by neutron powder diffraction and X-ray diffraction

We prepared samples of cubic γ-MoN_x (x∼0.5) by high-pressure-high-temperature synthesis. N atom site occupancies within the defect rock salt structure were determined from time-of-flight neutron diffraction and powder X-ray diffraction data by Rietveld analysis. The results show that N atoms occupy only octahedral sites within the structure. The semi-metallic compound is a superconductor, with determined by SQUID magnetometry. The compressibility of the material was determined by synchrotron X-ray diffraction measurements at high pressure in the diamond anvil cell. The vibrational density of states was studied by Raman scattering spectroscopy.     

Liquid chromatographic analysis of cinchona alkaloids in beverages

A method for the determination of Cinchona extract (whose main components are the alkaloids cinchonine, cinchonidine, quinidine, and quinine) in beverages by liquid chromatography was developed. A beverage with an alcohol content of more than 10% was loaded onto an OASIS HLB solid-phase extraction cartridge, after it was adjusted to pH 10 with 28% ammonium hydroxide. Other beverages were centrifuged at 4000 rpm for 5 min, and the supernatant was loaded onto the cartridge. The cartridge was washed with water followed by 15% methanol, and the Cinchona alkaloids were eluted with methanol. The Cinchona alkaloids in the eluate were chromatographed on an L-column ODS (4.6 mm id x 150 mm) with methanol and 20 mmol/L potassium dihydrogen phosphate (3 + 7) as the mobile phase. Cinchona alkaloids were monitored with an ultraviolet (UV) detector at 230 nm, and with a fluorescence detector at 405 nm for cinchonine and cinchonidine and 450 nm for quinidine and quinine (excitation at 235 nm). The calibration curves for Cinchona alkaloids with the UV detector showed good linearity in the range of 2-400 microg/mL. The detection limit of each Cinchona alkaloid, taken to be the concentration at which the absorption spectrum could be identified, was 2 microg/mL. The recovery of Cinchona alkaloids added at a level of 100 microg/g to various kinds of beverages was 87.6-96.5%, and the coefficients of variation were less than 3.3%. A number of beverage samples, some labeled to contain bitter substances, were analyzed by the proposed method. Quinine was detected in 2 samples of carbonated beverage.     

Structural and electronic differences of copper(I) complexes with tris(pyrazolyl)methane and hydrotris(pyrazolyl)borate ligands

Copper(I) complexes with tripodal nitrogen-containing neutral ligands such as tris(3,5-diisopropyl-1-pyrazolyl)methane (L1') and tris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)methane (L3'), and with corresponding anionic ligands such as hydrotris(3,5-diisopropyl-1-pyrazolyl)borate (L1-) and hydrotris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)borate (L3-) were synthesized and structurally characterized. Copper(I) complexes [Cu(L1')Cl] (1), [Cu(L1')(OClO3)] (2), [Cu(L1')(NCMe)](PF6) (3a), [Cu(L1')(NCMe)](ClO4) (3b), [Cu(L1')(CO)](PF6) (4a), and [Cu(L1')(CO)](ClO4) (4b) were prepared using the ligand L1'. Copper(I) complexes [Cu(L3')Cl] (5) and [Cu(L3')(NCMe)](PF6) (6) with the ligand L3' were also synthesized. Copper(I) complexes [Cu(L1)(NCMe)] (7) and [Cu(L1)(CO)] (8) were prepared using the anionic ligand L1-. Finally, copper(I) complexes with anionic ligand L3- and acetonitrile (9) and carbon monoxide (10) were synthesized. The complexes obtained were fully characterized by IR, far-IR, 1H NMR, and 13C NMR spectroscopy. The structures of both ligands, L1' and L3', and of complexes 1, 2, 3a, 3b, 4a, 4b, 5, 6, 7, and 10 were determined by X-ray crystallography. The effects of the differences in (a) the fourth ligand and the counteranion, (b) the steric hindrance at the third position of the pyrazolyl rings, and most importantly, (c) the charge of the N3 type ligands, on the structures, spectroscopic properties, and reactivities of the copper(I) complexes are discussed. The observed differences in the reactivities toward O2 of the copper(I) acetonitrile complexes are traced back to differences in the oxidation potentials determined by cyclic voltammetry. A special focus is set on the carbonyl complexes, where the 13C NMR and vibrational data are presented. Density functional theory (DFT) calculations are used to shed light on the differences in CO bonding in the compounds with neutral and anionic N3 ligands. In correlation with the vibrational and electrochemical data of these complexes, it is demonstrated that the C-O stretching vibration is a sensitive probe for the "electron richness" of copper(I) in these compounds.     

A novel construction of dibenzofuran-1,4-diones by oxidative cyclization of quinone-arenols

A novel oxidative cyclization of quinone-arenols 5 leading to products 6 with a dibenzofuran-1,4-dione structure, which forms the core of several natural products, has been developed and applied to the synthesis of violet-quinone (4).     

Surface design for precise control of spatial growth of a mesostructured inorganic/organic film on a large-scale area

A microfabrication technique is presented to fabricate a mesostructured inorganic/organic composite film, i.e., silica/cetyltrimethylammonium chloride (CTAC) film, with near-perfect site-selectivity on a large surface area based on a spatially regulated growth method. To precisely regulate the site-selective growth of this mesocomposite film at the solid/liquid interface, we designed a novel microtemplate consisting of a "dual-component" self-assembled monolayer (SAM) with alternating hydrophobic trifluorocarbon (CF3) and cationic amino (NH2) groups. First, (heptadecafluoro-1,1,2,2-tetrahydrodecyl)trimethoxysilane (FAS)-SAM was formed onto Si substrate covered with native oxide (SiO2/Si) from vapor phase. The substrate was then photolithographically micropatterned using 172 nm vacuum UV light. Finally, the micropatterned FAS-SAM was immersed in a solution of 1 vol % (aminoethylaminomethyl)phenethyltrimethoxysilane (AEAMPS) in absolute toluene. Due to these treatments, a dual-SAM microtemplate with CF3- and NH2-terminated surfaces was fabricated, as evidenced by lateral force microscopy, ellipsometry, and X-ray photoelectron spectroscopy. Using this template, the microfabrication of a mesocomposite film was demonstrated. As a control, the micropatterned hydrophobic FAS-SAM template (composed of CF3- and OH-terminated surfaces) was also treated under the same conditions. Optical microscopy and atomic force microscopy confirmed that the formation of the continuous mesocomposite film proceeded only on the FAS-SAM-covered regions, while the AEAMPS-SAM-covered regions remained free of deposits. This shielding effect also remained constant regardless of the pattern's geometry, i.e., the interval distance between the FAS-SAM-covered areas in the pattern. Through this approach, we were able to obtain well-defined 5-, 10-, and 20-mum wide mesocomposite microlines over the entire 10 x 10 mm2 area with high area-selectivity. On the other hand, when the SiO2 regions were not terminated with the cationic NH2 groups, cluster formation proceeded not only on the hydrophobic CF3 regions but also on the SiO2 regions, particularly with an increase in the pattern interval distance, resulting in lower final pattern resolution.     

Self-assembly patterning of silica colloidal crystals

We developed a self-assembly process of silica particles to fabricate desired patterns of colloidal crystals having high feature edge acuity and high regularity. A micropattern of colloidal methanol prepared on a self-assembled monolayer in hexane was used as a mold for particle patterning, and slow dissolution of methanol into hexane caused shrinkage of molds to form micropatterns of close-packed SiO2 particle assemblies. This result is a step toward the realization ofnano/micro periodic structures for next-generation photonic devices by a self-assembly process.     

Preparation and photochromism of diarylethene covalently bonded onto layered sodium-magadiite surfaces

Diarylethene derivatives (DE) covalently bonded to silanol oxygens of layered silicate surfaces, i.e., magadiite (Mag), were synthesized and investigated for their photochromic behavior. The DE-Mag layered hybrids were found to undergo reversible color change by alternating UV and visible light irradiation. A more highly efficient, reproducible photochromic behavior was realized with DE-Mag than with a corresponding DE-Si possessing silyl substituents on DE in place of the Mag surface. Moreover, the present covalently bonded DE exhibited an improvement over DE hybrids incorporated in layered double hydroxide (LDH) clays, in which the repetitive photochromic behavior decreased during alternating irradiation, due to the accumulation of the photochemically inert parallel isomers of DE.     

Study on permeation behavior and chemical degradation of PA66 in acid solution

In many polymers under corrosive liquids, degradation followed after permeation of environmental solution for a long period. The permeation rate of environmental solution, in many cases, is very low in corrosion-resistant polymeric materials. Therefore, the observation of the permeation of environmental solution and degradation of polymeric materials are very difficult in practical application. A simulation of permeation of solution is required in order to understand the permeation behavior of environmental solution and polymer degradation. A detailed analysis of the permeation behavior of solution accompanied by chemical reaction is important to study for improving the lifetime of polymers. Polyamide 66 (PA66) and sulfuric acid solution were used to investigate the quantitative study of permeation of environmental solution and its relation to degradation of polymeric materials. Correlation between diffusion process and degradation of PA66 related to the decrease of weight average molecular weight was defined. The diffusion rate of sulfuric acid solution was found to increase by decreasing weight average molecular weight of PA66 due to the established chain scission by hydrolysis reaction. The permeation of sulfuric acid solution that affected the decomposition reaction was modeled and quantitative evaluation of permeation of sulfuric acid was established.     

Electric quadrupole model on the formation of molecular chirality dependent domain shapes of lipid monolayers at the air-water interface

Shapes and orientational deformation of a lipid monolayer domain have been analyzed taking into account the surface pressure, line tension, and electrostatic energy due to the spontaneous polarization and electric quadrupole density generated from the domain. The electrostatic energy due to the generation of spontaneous polarization and electric quadrupole density contributes to the formation of orientational deformation as the Frank elastic energy and spontaneous splay, respectively. Since the orientational configuration of the electric quadrupole density and in-plane spontaneous polarization is dependent on the molecular chirality, and the positive splay deformation of electric quadrupole density is induced by the spontaneous splay, the bending direction of in-plane spontaneous polarization depends on the chirality of constituent lipids. The electrostatic energy due to the in-plane spontaneous polarization is dependent on the orientational deformation of in-plane spontaneous polarization, and bends the domain shape towards the bending direction of the in-plane spontaneous polarization. It has been demonstrated that the chiral dependence of the domain shapes of lipid monolayers originated from the chiral dependence of orientational structure due to the electric quadrupole density.