Analysis to obtain precise density fluctuation of supercritical fluids by small-angle X-ray scattering

A procedure of analysis for small-angle X-ray scattering (SAXS) data has been established to obtain density fluctuation of supercritical fluids near the critical point. It is indispensable for the certain analysis to utilize both of high-quality SAXS data measured under stable thermodynamic condition and accurate P–ρ–T data in supercritical region. As a standard example, SAXS measurements have been performed for supercritical CO₂, which is a suitable sample satisfying the condition for both experiment and analysis. The measurements were carried out along four isothermal conditions at reduced temperature of T_r = T/T_c = 1.020, 1.022, 1.043 and 1.064. Comparing the experimental density fluctuation with calculated one from the most reliable equation of state, the differences are within 8% at most.     

Studies on novel cyclodextrans: Inclusion of C60 and C70

Cycloisomalto-heptaose (CI-7) and cycloisomalto-octaose (CI-8) are two novel cyclodextrans. Treatment with C₆₀ or C₇₀ by kneading leads to the formation of four distinct water-soluble inclusion complexes: CI-7/C₆₀ (2: 1), CI-8/C₆₀ (2: 1), CI-7/C₇₀ (2: 1) and CI-8/C₇₀ (2: 1). Their formation and structures have been examined by UV vis spectroscopy, X-ray powder diffraction and fluorescence spectral studies. The reaction is a reversible process.     

A mediator-type biosensor as a new approach to biochemical oxygen demand estimation

A novel biosensor for the determination of biochemical oxygen demand (BOD) was developed using potassium hexacyanoferrate(III) [HCF(III)] as a mediator. The sensor element consists of a three-electrode system, with both working and counter electrodes compactly integrated as a disposable using etching and electroplating processes. Pseudomonas fluorescens biovar V (isolated from a wastewater treatment plant) was immobilized on the surface of the working electrode using poly(vinyl alcohol)-quaternized stilbazol (PVA-SbQ) photopolymer gel. Synthetic wastewater described by the Organization for Economic Cooperation and Development (OECD) was used as a standard solution instead of glucose-glutamic acid synthetic wastewater. The conditions of amperometric measurement were optimized at +600 mV (vs. Ag/AgCl) operating potential, namely 40 mM HCF(III) in a 0.1 M phosphate buffer (pH 7.0) at 20 degrees C. The sensor response was linear from 15 up to 200 mg O l-1 BOD. The response time was 15 min at 200 mg O l-1 BOD. To demonstrate the wide metabolic range of activity of the sensor, the sensor response to 14 substances in four categories of organic compounds was investigated. Further, it was shown that the response of this BOD sensor was not influenced in samples with low concentrations of dissolved oxygen under the measuring conditions used. For real wastewaters, the BOD values were determined using the sensor and compared favorably with those determined by the conventional BOD5 method.     

Catalytic asymmetric desymmetrization of cyclic meso-1,3- and 1,4-diols by a phosphinite derivative of quinidine

Asymmetric monobenzoylation reactions of cyclic meso-1,3- and 1,4-diols were catalyzed by a phosphinite derivative of quinidine to afford the corresponding monobenzoylated diol with good yield and enantioselectivity. [reaction: see text]     

Synthesis of crown ether-terminated poly(methyl methacrylate) by radical chain transfer polymerization

Mercapto-16-crown-5 was prepared starting from tetraethyleneglycol and 3-chloro-2-chloromethyl-1-propene. Radical polymerization of methyl methacrylate was carried out in the presence of mercapto-16-crown-5 as a chain transfer agent to give crown ether-terminated poly(methyl methacrylate). The end crown group was characterized by IR and ¹H-NMR spectra. Sodium cation was selectively extracted by this crown-containing polymer. The molecular weight of the obtained polymer had influence upon the ability of extraction of sodium cation.     

Catalytic asymmetric oxidative lactonizations of meso-diols using a chiral iridium complex

A chiral amino alcohol/Ir complex catalyzes the asymmetric oxidative lactonizations of meso-diols to give the corresponding lactones in up to 81% ee.     

Preparation of Pb2CrO5 thin films by an electron-beam evaporation technique

Pb₂CrO₅ thin films have been prepared by an electron-beam evaporation deposition technique on glass substrates using ceramic disks. The thin film fabrication conditions are studied by x-ray diffraction, replica electron micrography and scanning electron microscopy as parameters of substrate temperature, annealing temperature and annealing time. As-deposited Pb₂CrO₅ thin films in the amorphous state are crystallized by heat treatment. Annealed thin films are structurally classified into three types according to the preferred orientations which depend on substrate temperatures (T _s:

1. (i)

   (020) atT _s=room temperature

2. (ii)

   mainly (310) atT _s=100 ‡C, and

3. (iii)

   (200) atT _s=350 ‡C.

The substrate temperature contributes to film orientations; annealing temperature and time-enhance film crystallinity. The annealing temperature is fixed between 400 and 500 ‡C in making appropriate Pb₂CrO₅ thin films. These thin films, ranging between 0.3 and 2.0 Μm in thickness, are prepared at a deposition rate of 1500 å/m.