Continuous measurements of stable isotopes of carbon dioxide and water vapour in an urban atmosphere: isotopic variations associated with meteorological conditions

Isotope ratios of carbon dioxide and water vapour in the near-surface air were continuously measured for one month in an urban area of the city of Nagoya in central Japan in September 2010 using laser spectroscopic techniques. During the passages of a typhoon and a stationary front in the observation period, remarkable changes in the isotope ratios of CO₂ and water vapour were observed. The isotope ratios of both CO₂ and water vapour decreased during the typhoon passage. The decreases can be attributed to the air coming from an industrial area and the rainout effects of the typhoon, respectively. During the passage of the stationary front, δ¹³C–CO₂ and δ¹⁸O–CO₂ increased, while δ²H–H₂Ov and δ¹⁸O–H₂Ov decreased. These changes can be attributed to the air coming from rural areas and the air surrounding the observational site changing from a subtropical air mass to a subpolar air mass during the passage of the stationary front. A clear relationship was observed between the isotopic CO₂ and water vapour and the meteorological phenomena. Therefore, isotopic information of CO₂ and H₂Ov could be used as a tracer of meteorological information.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Collinear fast atomic-beam laser spectroscopy at riken garis/igisol

We have constructed a fast atomic-beam collinear laser spectroscopy system connected to the on-line isotope separator facility GARIS/IGISOL at RIKEN. This system is potentially powerful in studying refractory elements. To test the system, an off-line collinear experiment was made on stable Hf isotopes produced by means of laser ablation technique. For production of radioactive Hf isotopes, the use of the inverse kinematics of a fusion reaction,⁹Be(¹⁶⁶Er,xn)^175-x Hf, was investigated. The radioactive isotope¹⁶⁹Hf was successfully extracted from GARIS/IGISOL and accelerated up to 30 keV.     

Outflow refreshment angiography: A bright blood, bright static tissue technique

A new “bright blood” strategy, outflow refreshment imaging, is introduced in which a number of overlapping slices are excited in rapid succession. Flowing spins that refresh each overlapped slice portion contribute a bright signal. Additionally, static tissue in each non-overlapped slice portion also yields a bright signal. However, the flow/static contrast is comparable to that produced in inflow refreshment images, and angiograms can be generated by conventional maximum intensity projection processing. The dual ability to visualize angiograms and static tissue images is a major benefit of the strategy. Computer simulations of flow sensitivities and in vivo results are presented which compare the outflow and inflow refreshment imaging strategies.     

Quarkonia at Finite T: An Approach Based On QCD Sum Rules and the Maximum Entropy Method

Quarkonium spectral functions at finite temperature are studied, making use of a recently developed method of analyzing QCD sum rules by the maximum entropy method. This approach enables us to directly obtain the spectral function from the sum rules, without having to introduce any specific assumption about its functional form. QCD sum rules for heavy quarkonia incorporate finite temperature effects in form of changing values of the various gluonic condensates that appear in the operator product expansion. These changes depend on the energy density and pressure at finite temperature, which we extract from quenched lattice QCD calculations. As a result, it is found that the charmonium ground states of both S-wave and P-wave channels dissolve into the continuum already at temperatures around or slightly above the critical temperature T _c , while the bottomonium states are less influenced by temperature effects, surviving up to about 2.5 T _c or higher for S-wave and about 2.0 T _c for P-wave states.     

Recoil-limited laser cooling of 87Sr atoms near the Fermi temperature

A dynamic magneto-optical trap, which relies on the rapid randomization of population in Zeeman substates, has been demonstrated for fermionic strontium atoms on the 1S0-3P1 intercombination transition. The obtained sample, 1x10(6) atoms at a temperature of 2 microK in the trap, was further Doppler cooled and polarized in a far-off resonant optical lattice to achieve 2 times the Fermi temperature.     

Thermal phase transition of RbMnFe(CN)6 observed by X-ray emission and absorption spectroscopy

The thermal phase transition of RbMnFe(CN)₆ has been observed by Mn and Fe 3p-1s X-ray emission spectroscopy (XES) and 1s X-ray absorption spectroscopy (XAS). The thermal variations of the spin states and the valences of Mn and Fe were determined to be Mn²⁺(S=5/2)-NC-Fe³⁺(S=1/2) for the high-temperature (HT) phase and Mn³⁺(S=2)-NC-Fe²⁺(S=0) for the low-temperature (LT) phase. These transitions are thus caused by charge transfer between Mn and Fe. The temperature dependences of Mn and Fe 3p-1s XES and 1s XAS were observed as the composition of the spectra of the HT and LT phases. The ratios of the HT component in each spectrum show good agreement with the thermal transition curves observed with magnetic susceptibility measurements.     

High-throughput characterization of local conductivity of Nd0.9Ca0.1Ba2Cu3O7−δ thin film by the low-temperature scanning microwave microscope

We developed a scanning microwave microscope (SμM) designed for high-throughput electric-property screening as well as for rapid construction of electronic phase diagrams at low temperatures. As a sensor probe, we used a high-Qλ/4 coaxial cavity resonator to which a thin needle with ball-tip end was attached. The sensor module was mounted on the low-temperature XYZ stage, which allowed us to map out the change of resonance frequency and quality factor due to the local tip-sample interaction at low temperatures. From the measurements of combinatorial thin films, such as Ti_1−xCo_xO_2−δ and Nd_0.9Ca_0.1Ba₂Cu₃O_7−δ (NCBCO), it was demonstrated that this SμM system has enough performance for the high-throughput characterization of sample conductance under variable temperature conditions.     

High-accuracy optical clock via three-level coherence in neutral bosonic 88Sr

An optical atomic clock scheme is proposed that utilizes two lasers to establish coherent coupling between the 5s2 1S0 ground state of 88Sr and the first excited state, 5s5p 3P0. The coupling is mediated by the broad 5s5p 1P1 state, exploiting the phenomenon of electromagnetically induced transparency. The effective linewidth of the clock transition can be chosen at will by adjusting the laser intensity. By trapping the 88Sr atoms in an optical lattice, long interaction times with the two lasers are ensured; Doppler and recoil effects are eliminated. Based on a careful analysis of systematic errors, a clock accuracy of better than 2 x 10(-17) is expected.     

Pre-filtering Effect in an Iterative Deconvolution Method and Its Application to Signal Recovery in Fiber-Optic Distributed Temperature Sensors

The signal quality of a fiber-optic distributed temperature sensor based on optical time domain reflectometry (OTDR) is improved using a pre-filtering technique in the iterative deconvolution method. Investigation of the performance is proposed using iteration conditions in which recovery rate of the signal-component is equal to that of the unfiltering technique. The recovered signal in the pre-filtering technique gives a good signal-to-noise ratio (SNR), 3 times of the unfiltered signal. Consequently, improvements in the OTDR signal with SNR of from 10 to 100 are obtained under the iterations for both distance and temperature resolutions.