Luminous Butterflies: Efficient Exciton Harvesting by Benzophenone Derivatives for Full‐Color Delayed Fluorescence OLEDs

Butterfly‐shaped luminescent benzophenone derivatives with small energy gaps between their singlet and triplet excited states are used to achieve efficient full‐color delayed fluorescence. Organic light‐emitting diodes (OLEDs) with these benzophenone derivatives doped in the emissive layer can generate electroluminescence ranging from blue to orange–red and white, with maximum external quantum efficiencies of up to 14.3 %. Triplet excitons are efficiently harvested through delayed fluorescence channels.     

Organic Dicarboxylate Negative Electrode Materials with Remarkably Small Strain for High‐Voltage Bipolar Batteries

As advanced negative electrodes for powerful and useful high‐voltage bipolar batteries, an intercalated metal–organic framework (iMOF), 2,6‐naphthalene dicarboxylate dilithium, is described which has an organic‐inorganic layered structure of π‐stacked naphthalene and tetrahedral LiO₄ units. The material shows a reversible two‐electron‐transfer Li intercalation at a flat potential of 0.8 V with a small polarization. Detailed crystal structure analysis during Li intercalation shows the layered framework to be maintained and its volume change is only 0.33 %. The material possesses two‐dimensional pathways for efficient electron and Li⁺ transport formed by Li‐doped naphthalene packing and tetrahedral LiO₃C network. A cell with a high potential operating LiNi_0.5Mn_1.5O₄ spinel positive and the proposed negative electrodes exhibited favorable cycle performance (96 % capacity retention after 100 cycles), high specific energy (300 Wh kg^?1), and high specific power (5 kW kg^?1). An 8 V bipolar cell was also constructed by connecting only two cells in series.     

The electronic band structure analysis of OLED device by means of in situ LEIPS and UPS combined with GCIB

Low-energy inverse photoelectron spectroscopy (LEIPS) and ultraviolet photoelectron spectroscopy (UPS) incorporated into the multitechnique XPS system were used to probe the ionization potential and the electron affinity of organic materials, respectively. By utilizing gas cluster ion beam (GCIB), in situ analyses and depth profiling of LEIPS and UPS were also demonstrated. The band structures of the 10-nm-thick buckminsterfullerene (C₆₀) thin film on Au (100 nm)/indium tin oxide (100 nm)/glass substrate were successfully evaluated in depth direction.     

Mechanochromic Delayed Fluorescence Switching in Propeller‐Shaped Carbazole–Isophthalonitrile Luminogens with Stimuli‐Responsive Intramolecular Charge‐Transfer Excited States

Herein, the universal design of high‐efficiency stimuli‐responsive luminous materials endowed with mechanochromic luminescence (MCL) and thermally activated delayed fluorescence (TADF) functions is reported. The origin of the unique stimuli‐triggered TADF switching for a series of carbazole–isophthalonitrile‐based donor–acceptor (D–A) luminogens is demonstrated based on systematic photophysical and X‐ray analysis, coupled with theoretical calculations. It was revealed that a tiny alteration of the intramolecular D–A twisting in the excited‐state structures governed by the solid morphologies is responsible for this dynamic TADF switching behavior. This concept is applicable to the fabrication of bicolor emissive organic light‐emitting diodes using a single TADF emitter.     

Carbometalation and Heterometalation of Carbon‐Carbon Multiple‐Bonds Using Group‐13 Heavy Metals: Carbogallation,Carboindation, Heterogallation,and Heteroindation

Organogallium and ‐indium compounds are useful reagents in organic synthesis because of their moderate stability, efficient reactivity and high chemoselectivity. Carbogallation and ‐indation of a carbon‐carbon multiple bond achieves the simultaneous formation of carbon‐carbon and carbon‐metal bonds. Heterogallation and ‐indation construct carbon‐heteroatom and carbon‐metal bonds. Therefore, these reaction systems represent a significant synthetic method for organogalliums and ‐indiums. Many chemists have attempted to apply various types of unsaturated compounds such as alkynes, alkenes, and allenes to these reaction systems. This minireview provides an overview of carboindation and ‐gallation as well as heteroindation and ‐gallation.     

Water barrier characteristics of plasma polymers of perfluorocarbons

Perfluorocarbon monomers such as C₂F₄, C₂F₆, C₄F₁₀, and mixtures thereof with H₂, were subjected to plasma polymerization and deposited onto low-density polyethylene (LDPE) substrates. The effect of plasma conditions, surface characteristics, and surface dynamics of plasma polymers on their ability to improve the resistance to water vapor permeation was investigated. An optimum discharge energy density was found for a monomer which provided the greatest reduction water vapor permeability. Although all of the plasma polymers show higher hydrophobicity than polyethylene, the reduction in water vapor permeability is not uniquely related to water contact angle. The surface-dynamic stability of a plasma polymer surface was found to be the key factor in determining the barrier performance of the plasma polymer. The extent of change of surface-configuration after water immersion strongly correlated with the improvement in the water vapor permeation resistance. Plasma polymers with the higher surface-dynamic stability provided the better water barrier coating applied on LDPE films. © 1996 John Wiley & Sons, Inc.     

Effects of Roxadustat on Erythropoietin Production in the Rat Body

Anemia is a major complication of chronic renal failure. To treat this anemia, prolylhydroxylase domain enzyme (PHD) inhibitors as well as erythropoiesis-stimulating agents (ESAs) have been used. Although PHD inhibitors rapidly stimulate erythropoietin (Epo) production, the precise sites of Epo production following the administration of these drugs have not been identified. We developed a novel method for the detection of the Epo protein that employs deglycosylation-coupled Western blotting. With protein deglycosylation, tissue Epo contents can be quantified over an extremely wide range. Using this method, we examined the effects of the PHD inhibitor, Roxadustat (ROX), and severe hypoxia on Epo production in various tissues in rats. We observed that ROX increased Epo mRNA expression in both the kidneys and liver. However, Epo protein was detected in the kidneys but not in the liver. Epo protein was also detected in the salivary glands, spleen, epididymis and ovaries. However, both PHD inhibitors (ROX) and severe hypoxia increased the Epo protein abundance only in the kidneys. These data show that, while Epo is produced in many tissues, PHD inhibitors as well as severe hypoxia regulate Epo production only in the kidneys.     

Magnetically Enhanced 15 kHz Glow Discharge of Methane

This work deals with the luminous chemical vapour deposition (plasma polymerization) of hydrocarbon polymeric thin films in a magnetic field enhanced discharge of methane. The films were deposited on 4″ <111> single crystal silicon substrates. We investigated the influence of the different glow discharge parameters (e.g. pressure, flow rate, power input, etc.) on the deposition rate of methane and the refractive index of the resulting polymeric films, as well as the distribution of these parameters across the wafer. We used a Shinko Seiki Plasma Polymerization equipment with a bell jar reactor comprising two electrodes connected to a symmetric AC power supply of 15 kHz. Two magnetrons were formed by placing two circular shaped concentric magnetic poles behind each electrode. The substrates were attached on both sides of a rotating wheel held at a floating potential in the middle of the two electrodes. This equipment allowed us to vary a single parameter and keep the other parameters constant over the whole process. We measured the thickness and the refractive index and their distribution over the wafer. The effect of the system pressure, decoupled from the effect of flow rate, is explained by the characteristic nature of luminous gas phase and by the polymerization/deposition mechanism of luminous chemical vapour deposition.     

Microstructure of metallic copper nanoparticles/metallic disc interface in metal–metal bonding using them

This paper describes a metal–metal bonding technique using metallic Cu nanoparticles prepared in aqueous solution. A colloid solution of metallic Cu particles with a size of 54 ± 15 nm was prepared by reducing Cu²⁺ (0.01 M (CH₃COO)₂Cu) with hydrazine (0.6 M) in the presence of stabilizers (5 × 10^?4 M citric acid and 5 × 10^?3 M cetyltrimethylammonium bromide) in water at room temperature in air. Discs made of metallic materials (Cu, Ni/Cu, or Ag/Ni/Cu) were successfully bonded under annealing at 400 °C and pressurizing at 1.2 MPa for 5 min in H₂ gas with help of the metallic Cu particle powder. Shear strength required for separating the bonded discs was 27.9 ± 3.9 for Cu discs, 28.1 ± 4.1 for Ni/Cu discs, and 13.8 ± 2.6 MPa for Ag/Ni/Cu discs. Epitaxial crystal growth promotes on the discs with a good matching for the lattice constants between metallic nanoparticles and metallic disc surfaces, which leads to strong bonding. Copyright © 2013 John Wiley & Sons, Ltd.     

Memory effect in CuAsSe glasses containing small amounts of Au

The Cu, As and Se contents of Au-containing CuAsSe glasses significantly affected both the resistivity in the memory state and the time required to reach the memory state, whereas the Au content affects only the latter. The main crystalline species formed in these glasses was a CuAsSe compound, and its formation was enhanced by the addition of Au. The role of Au in the memory effect was discussed on the basis of crystallization behavior of glasses.