Mg-promoted reductive coupling of aromatic carbonyl compounds with trimethylsilyl chloride and bis(chlorodimethylsilyl) compounds

Mg-promoted reductive coupling of aromatic carbonyl compounds (1) with chlorosilanes, such as trimethylsilyl chloride (TMSCl:2), 1,2-bis(chlorodimethylsilyl)ethane (3) and 1,5-dichlorohexamethyltrisiloxane (4), in N,N-dimethylformamide (DMF) at room temperature brought about selective and facile reductive formation of both of carbon-silicon and oxygen-silicon bonds to give the corresponding α-trimethylsilylalkyl trimethylsilyl ethers (5) and cyclic siloxanes (6), (7) in moderate to good yields, respectively. The present facile and selective coupling may be initiated through electron transfer from Mg metal to aromatic carbonyl compounds (1).     

Autoxidized phospholipids in hexane: nano-self-assemblies studied by synchrotron small-angle X-ray scattering

Synchrotron small-angle X-ray scattering (SAXS) was used to analyze the structure of self-assembled autoxidized phospholipids in a very dilute solution of hexane. In addition, it was used to build a self-consistent model of the aggregates, taking into account their inner heterogeneities and polydispersity. The scattering intensity from a dilute mixture of different types of noninteracting components of the phospholipid system was represented as a linear combination of partial intensities from the components weighted by their volume fractions. Applying this approach the final model of the system was described as a mixture of polydisperse reverse micelles and aggregates with spherical and cylindrical shapes. Spherical aggregates were represented as hollow spheres with inner radius 0.7 nm (occupied by water or hexane) and outer radius 1.5 nm. Geometrical parameters of the aggregates did not change much during the oxidation process, while the ratio of reverse micelles and aggregates in solution varied. The amount of the reverse micelles increased from very low to about 80%, whereas the content of other aggregates constantly reduced. The analysis performed in this study helps one to better understand the processes of phospholipid oxidation, which may occur in biological membranes.     

Electro-optic transparent frequency conversion of a continuous light wave based on multistage phase modulation

Frequency conversion of a continuous light wave based on multistage phase modulation has been investigated both analytically and numerically. The proposed frequency-conversion process consists of three stages: (i) phase modulation and chirp compression to generate a pulse train, (ii) Doppler shift of the pulse center frequency in a second phase modulation, and (iii) demodulation of the pulse train. By controlling the modulation power we can select the destination frequency from an equally spaced grid separated by the modulation frequency. A conversion efficiency of approximately 40% has been numerically confirmed with respect to a destination frequency of +/- 50 channels. Carrier frequency conversion of an analog data stream is numerically demonstrated.     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.     

A study on the effect of the source line profile in atomic magneto-optical rotation spectroscopy (AMORS), using a Zeeman-shifted hollow cathode lamp

Summary Using a magnetized hollow cathode lamp as a Zeeman-shifted light source, the effects of the source line profile on the intensity of rotatory radiation and the calibration curve were studied for AMORS (atomic magneto-optical rotation spectroscopy). With the alteration of the source line profile, an increase in the intensity of rotatory radiation by about max. 40% was found. The rollover of the calibration curve could be avoided by selecting the strengths of the magnetic fields applied to the atomizer and the hollow cathode lamp.

---

Untersuchung der Wirkung des Linienprofils der Lichtquelle in der magneto-optischen Atomrotations-Spektroskopie (AMORS) mit Hilfe einer Hohlkathodenlampe mit Zeeman-Verschiebung

Zusammenfassung Mit Hilfe einer magnetisierten Hohlkathodenlampe als Lichtquelle mit Zeeman-Verschiebung wurden die Wirkungen des Linienprofils der Lichtquelle auf die Intensität der Rotationsstrahlung und auf die Eichkurve untersucht. Mit Änderung des Linienprofils ergab sich eine Intensitätssteigerung der Rotationsstrahlung bis zu 40%. Abweichungen der Eichkurve konnten durch geeignete Wahl der magnetischen Feldstärken am Atomizer und der Hohlkathodenlampe vermieden werden.

     

Diels-alder reactions of cyclohexadienes derived from decarboxylation of photo[4 + 2]cycloadducts between 4,6-dimethyl-2-pyrone and cyclic olefins

Labile photo [4 + 2] adducts between 4,6-dimethyl-2-pyrone and cyclic olefins reacted with second olefins to give cross adducts, and with acetylenes to afford both bis-adducts and benzene derivatives with the concurrent decarboxylation, respectively. The reaction mechanism of the latter was considered.     

Effect of oxygen on the formation and decay of stilbene radical cation during the resonant two-photon ionization

Formation and decay of radical cations of trans-stilbene and p-substituted trans-stilbenes (S.+) during the resonant two-photon ionization (TPI) of S in acetonitrile in the presence and absence of O(2) have been studied with laser flash photolysis using a XeCl excimer laser (308 nm, fwhm 25 ns). The transient absorption spectra of S.+ were observed with a peak around 470-490 nm. The formation quantum yield of S.+ (0.06-0.29) increased with decreasing oxidation potential (E(ox)) and increasing fluorescence lifetime (tau(f)) of S, except for trans-4-methoxystilbene which has the lowest E(ox) and longer tau(f) among S. The considerable low yield and fast decay in a few tens of nanoseconds time scale were observed for trans-4-methoxystilbene.+ in the presence of O(2), but not for other S.+ . It is suggested that formation of the ground-state complex between trans-4-methoxystilbene and O(2) and the distonic character of trans-4-methoxystilbene.+ with separation and localization of the positive charge on the oxygen of the p-methoxyl group and an unpaired electron on the beta-olefinic carbon are responsible for the fast reaction of trans-4-methoxystilbene.+ with O(2) or superoxide anion, leading to the considerable low yield and fast decay of trans-4-methoxystilbene.+ . The mechanism based on the transient absorption measurement of S.+ during the TPI is consistent with the relatively high oxidation efficiency of trans-4-methoxystilbene among S based on the product analysis during the photoinduced electron transfer in the presence of a photosensitizer such as 9,10-dicyanoanthracene and O(2) in acetonitrile.     

Mechanism of Enzymatic Hydrolysis of Poly(butylene succinate) and Poly(butylene succinate‐co‐L‐lactate) with a Lipase from Pseudomonas cepacia

Enzymatic hydrolysis of poly(butylene succinate) (PBS) and poly(butylene succinate‐co‐L ‐lactate) (PBSL) has been studied by using a lipase originated from Pseudomonas cepacia. It has been found that the drawn fibers of PBSL are readily hydrolyzed by the action of the lipase, while those of PBS undergo little enzymatic hydrolysis. Since the polymer films of PBS and PBSL are readily hydrolyzed under the same conditions, the enzymatic hydrolysis should depend not only on the crystallinity but also on the molecular orientation. The molecular weight of the samples gradually decreases with incubation time, because nonspecific hydrolysis occurs on the main chains of both PBS and PBSL even in the absence of lipase. The enzymatic hydrolysis of PBS and PBSL gives 4‐hydroxybutyl succinate (HBS) as the main product with traces of succinic acid and butane‐1,4‐diol together with L ‐lactic acid in the case of PBSL. In addition, the hydrolysis rate of the carboxyl end‐capped PBS is much slower than that of the original or hydroxyl end‐capped PBS. These results imply a hydrolysis mechanism involving the preferential exo‐type chain scission from the carboxyl terminals.

Mass remaining of various PBS and PBSL samples as a function of time.     

Enzyme electrochemical preparation of a 3-keto derivative of 1,5-anhydro-d-glucitol using glucose-3-dehydrogenase

A novel enzymatic organic synthesis was reported, utilizing glucose-3-dehydrogenase (G3DH) and its regeneration via electrochemical methods. We combined the water-soluble G3DH prepared from a marine bacterium, Halomonas sp. α-15, and electron mediator with the electrode system in order to regenerate the enzyme. Using this system, the conversion of 1,5-anhydro-d-glucitol (1,5AG), a diabetes marker in human blood, was investigated. The final yield of the product, 3-keto anhydroglucitol (3-ketoAG), which was identified by ¹³C nuclear magnetic resonance, was 82% based on the initial amount of 1,5AG. The electrochemical yield of the reaction proceeded almost stoichiometrically. The electrochemical conversion rate of 1,5AG was 1.24 mmol/(L·h), and the electrochemical yield of 1,5AG consumption was 80%, whereas that for 3-ketoAG was 60%.