Signals for scalar top quark atep collider HERA

In the framework of the minimal supersymmetric standard model (MSSM) and theR-parity breaking model (RBM), we investigate production processes of the scalar top (stop) at HERA energies. These models are characterized by the possible existence of the light stop whose mass is lighter than those of the top quark and the other squarks. It is shown that in the MSSM the stop pair production via boson-gluon fusion gives a sizeable cross section and the most serious background $ep \to ec\bar cX$ could be suppressed by appropriate kinematical cuts. We also show that in the RBM the stop is singly produced in the neutral current processes and we have a clear signal as a sharp peak in the Bjorken parameterx distribution of the scattered electron.     

Photophysical properties of oligo(2,3-thienyleneethynylene)s

Photophysical properties of oligo(2,3-thienyleneethynylene)s (nTE, n denotes the number of thiophene rings, n = 2, 3) in benzene were investigated using steady-state, time-resolved fluorescence, and transient absorption spectroscopies. For 2TE, generation of the radiative S2 and nonradiative S1 states was confirmed. Upon excitation, the S2 state was initially generated and deactivated to the S1 state within 10 ps. The S1 state exhibited the transient absorption band at 470 nm, of which the lifetime was estimated to be 5.3 ns. In the case of 3TE, on the other hand, it was revealed that the radiative S1 state with a transient absorption peak at 650 nm was generated upon excitation. The T1 states of nTE were generated from the S1 states. The quantum yields were estimated to be 0.52 and 0.54 for 2TE and 3TE, respectively. Extremely fast reactions in the higher triplet excited state were indicated for both 2TE and 3TE.     

Direct observation of the one-electron reduction of methyl viologen mediated by the CO2 radical anion during TiO2 photocatalytic reactions

The one-electron reduction of methyl viologen (MV(2+)) mediated by the carbon dioxide radical anion (CO(2)(*-)) during photocatalytic reactions in a colloidal TiO(2) aqueous solution (pH 2) has been investigated by time-resolved absorption spectroscopy. The formation of MV(*+) generated from the one-electron reduction reaction with CO(2)(*-), which is generated from the one-electron oxidation reactions with the photogenerated holes (h(+)), was directly observed. The spectral features of the photogenerated charge carriers and the kinetic analysis of the formation process of MV(*+) revealed that the CO(2)(*-), desorbed from the surface, reacts with MV(2+) via a homogeneous electron-transfer process in the bulk solution.     

Kinetics of transient end-to-end contact of single-stranded DNAs

The formation of the pyrene (Py) dimer radical cation (Py(2)(*+)) was used to measure the kinetics of the intrastrand end-to-end contact rates of single-stranded DNAs (ssDNAs) in the 10 nanoseconds to the tens of microseconds time range. ssDNAs labeled with Py at both ends with the lengths of 3, 6, and 9 mer were synthesized, and the two-photon ionization method was employed to generate a Py(*+), which enables the measurements of the end-to-end contact rates from 10 ns. The formation rate of Py(2)(*+) depended on the length and the sequence of the ssDNAs, and about 1 order of magnitude faster rates were observed for the T-rich ssDNAs compared to those for the corresponding length of A-rich ssDNAs, showing that ssDNA made from adenines is much more rigid than that composed of thymidines. As for the T-rich ssDNAs, the formation of Py(2)(*+) attributed to the misfolded structures was also observed, which is consistent with the configurational diffusion model suggested by Ansari and co-workers.     

New resveratrol oligomers in the stem bark of Vatica pauciflora

Five new resveratrol oligomers; pauciflorols A-C (1-3), isovaticanols B (6) and C (8), and three new oligostilbene glucosides; pauciflorosides A (11), B (13), C (14), were isolated from the stem bark of Vatica pauciflora (Dipterocarpaceae) together with known 17 resveratrol oligomers (4, 5, 7, 9, 10, 12 and 15-25) and bergenin (26). The structures of isolates were established on the basis of detailed spectroscopic analysis. The typical and characteristic spectral properties of some resveratrol oligomers were also discussed.     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.     

Alcohol‐Vapor Inclusion in Single‐Crystal Adsorbents [MII2(bza)4(pyz)]n (M=Rh,Cu): Structural Study and Application to Separation Membranes

The vapor absorbency of the series of alcohols methanol, ethanol, 1‐propanol, 1‐butanol, and 1‐pentanol was characterized on the single‐crystal adsorbents [M^II₂(bza)₄(pyz)]_n (bza=benzoate, pyz=pyrazine, M=Rh ( 1 ), Cu ( 2 )). The crystal structures of all the alcohol inclusions were determined by single‐crystal X‐ray crystallography at 90 K. The crystal‐phase transition induced by guest adsorption occurred in the inclusion crystals except for 1‐propanol. A hydrogen‐bonded dimer of adsorbed alcohol was found in the methanol‐ and ethanol‐inclusion crystals, which is similar to a previous observation in 2 ?2EtOH (S. Takamizawa, T. Saito, T. Akatsuka, E. Nakata, Inorg. Chem. 2005 , 44, 1421–1424). In contrast, an isolated monomer was present in the channel for 1‐propanol, 1‐butanol, and 1‐pentanol inclusions. All adsorbed alcohols were stabilized by hydrophilic and/or hydrophobic interactions between host and guest. From the combined results of microscopic determination (crystal structure) and macroscopic observation (gas‐adsorption property), the observed transition induced by gas adsorption is explained by stepwise inclusion into the individual cavities, which is called the “step‐loading effect.” Alcohol/water separation was attempted by a pervaporation technique with microcrystals of 2 dispersed in a poly(dimethylsiloxane) membrane. In the alcohol/water separation, the membrane showed effective separation ability and gave separation factors (alcohol/water) of 5.6 and 4.7 for methanol and ethanol at room temperature, respectively.     

Site-selective photocycloadditions of 2-pyrones with electron-poor olefins and the derivation from the cycloadducts

Photosensitized cycloaddition of 4,6-dimethyl-2-pyrone ( 1 ) with methacrylonitrile ( 3b ) afforded two types of [2 + 2]cycloadducts, 4b and 6b , across the C₅-C₆ and C₃-C₄ double bonds in 1 , respectively. Photosensitized reactions of 1 with dimethyl maleate and dimethyl cyclobutene-1,2-dicarboxylate gave [2 + 2]cycload-ducts 4d, 4e across the C₅-C₆ double bond, in addition to [4 + 2]cycloadduct 9d or bicyclo[4.2.0]octadiene 10e . The photoreactions of methyl 2-pyrone-5-carboxylate ( 2 ) with 3b and 2-chloroacrylonitrile ( 3c ) gave [4 + 2]cycloadducts 5b, 5c in addition to [2 + 2]cycloadducts 11b and 11c across the C₅-C₆ double bond in 2 . The photocycloaddition mechanism was explained from results calculated by means of PM3-CI method. Namely, the site- and/or regio-selective products, 4, 5, 8, 9 and 10 were thought to come from the same site-selective radical intermediates in the case of electron-poor olefins. Pyrolysis and/or hydrolysis of the cycload-ducts 4e, 5b, 5c gave 5,6-dihydro-2-pyrone 12 or benzene derivatives.     

Photochemical study of [3(3)](1,3,5)cyclophane and emission spectral properties of [3n]cyclophanes (n = 2-6)

Thephotochemical reaction of [3(3)](1,3,5)cyclophane 2, which is a photoprecursor for the formation of propella[3(3)]prismane 18, was studied using a sterilizing lamp (254 nm). Upon photolysis in dry and wet CH2Cl2 or MeOH in the presence of 2 mol/L aqueous HCl solution, the cyclophane 2 afforded novel cage compounds comprised of new skeletons, tetracyclo[6.3.1.0.(2,7)0(4,11)]dodeca-5,9-diene 43, hexacyclo[6.4.0.0.(2,6)0.(4,11)0.(5,10)0(9,12)]dodecane 44, and pentacyclo[6.4.0.0.(2,6)0.(4,11)0(5,10)]dodecane 45. All of these products were confirmed by the X-ray structural analyses. A possible mechanism for the formation of these photoproducts via the hexaprismane derivative 18 is proposed. The photophysical properties in the excited state of the [3n]cyclophanes ([3n]CP, n = 2-6) were investigated by measuring the emission spectra and determining the quantum yields and lifetimes of the fluorescence. All [3n]CPs show excimeric fluorescence without a monomeric one. The lifetime of the excimer fluorescence becomes gradually longer with the increasing number of the trimethylene bridges. The [3n]CPs also shows excimeric phosphorescence spectra without vibrational structures for n = 2, 4, and 5, while phosphorescence is absent for n = 3 and 6. With an increase in symmetry of the benzene skeleton in the [3(3)]- and [3(6)]CPs, the probability of the radiation (phosphorescence) process from the lowest triplet state may drastically decrease.     

Photoinduced desorption of sulfur from gold nanoparticles loaded on metal oxide surfaces

We now report photoinduced sulfur desorption from the surfaces of Au nanoparticles loaded on metal oxides. This reaction occurs in water at ordinary temperature and pressure. Nanometer-sized Au particles have been formed on the surfaces of various metal oxides by deposition-precipitation (Au/oxides). Elemental sulfur (S8) is selectively adsorbed on the Au nanoparticle surfaces of Au/oxides in an atomic state at a coverage of (theta) 1/3. Irradiation (lambdaex > 300 nm) of the sulfur adsorbed Au/anatase TiO2 in water has led to reductive desorption of the sulfurs at room temperature. Electrochemical measurements using Au/oxides indicate that the driving force for this reaction is the photoinduced upward shift of Fermi energy of the metal oxide-supported Au nanoprticles. This study will open up a novel and wide application of heterogeneous photocatalysis for thermal catalysts.