Characterization of NIES CRM No. 23 Tea Leaves II for the determination of multielements

A candidate environmental certified reference material (CRM) for the determination of multielements in tea leaves and materials of similar matrix, NIES CRM No. 23 Tea Leaves II, has been developed and characterized by the National Institute for Environmental Studies (NIES), Japan. The origin of the material was tea leaves, which were ground, sieved through a 106-μm mesh, homogenized, and then subdivided into amber glass bottles. The results of homogeneity and stability tests indicated that the material was sufficiently homogeneous and stable for use as a reference material. The property values of the material were statistically determined based on chemical analyses by a network of laboratories using a wide range of methods. Sixteen laboratories participated in the characterization, and nine certified values and five reference values were obtained. These property values of the candidate CRM, which are expressed as mass fractions, were close to the median and/or mean values of the mass fractions of elements in various tea products. The candidate CRM is appropriate for use in analytical quality control and in the evaluation of methods used in the analysis of tea and materials of similar matrix.     

Synthesis,Characterization, and Electronic Structures of Porphyrins Fused with Polycyclic Aromatic Ring Systems

A series of porphyrins fused with acenaphthylene, phenanthroline, and benzofluoranthene polycyclic aromatic rings were prepared by means of a 3+1 porphyrin synthesis approach and subsequent retro‐Diels–Alder reaction of bicyclo[2.2.2]octadiene‐fused precursors. Analysis of the magnetic circular dichroism spectra and the results of time‐dependent DFT calculations are used to identify the reasons for the trends observed in the wavelengths and relative intensities of the Q bands of the products. Michl's perimeter model is used as a conceptual framework to explain the changes in the relative energies of the frontier π‐molecular orbitals.     

High‐Density Liquid‐Crystalline Polymer Brushes Formed by Surface Segregation and Self‐Assembly

High‐density polymer brushes on substrates exhibit unique properties and functions stemming from the extended conformations due to the surface constraint. To date, such chain organizations have been mostly attained by synthetic strategies of surface‐initiated living polymerization. We show herein a new method to prepare a high‐density polymer brush architecture using surface segregation and self‐assembly of diblock copolymers containing a side‐chain liquid‐crystalline polymer (SCLCP). The surface segregation is attained from a film of an amorphous base polymer (polystyrene, PS) containing a minor amount of a SCLCP‐PS diblock copolymer upon annealing above the glass‐transition temperature. The polystyrene portion of the diblock copolymer can work as a laterally mobile anchor for the favorable self‐assembly on the polystyrene base film.     

Unique molecular orientation in a smectic liquid crystalline polymer film attained by surface-initiated graft polymerization

Liquid crystalline (LC) polymer brushes containing a mesogenic azobenzene (Az) moiety are synthesized on a quartz or silicon substrate by surface-initiated atom transfer radical polymerization. The molecular orientation of the Az units and the LC properties in the grafted chains are evaluated by UV-vis spectroscopy, polarized optical microscopy, and grazing incidence X-ray diffraction measurements. The Az side chains of the grafted chains exhibited a smectic LC phase in which the smectic layers are oriented perpendicular to the substrate with a parallel orientation of the mesogens. In contrast, a spincast film of the identical LC polymer without grafting to the surface shows layer structures parallel to the substrate. A drastic effect of tethering one end to the substrate on the LC orientation is demonstrated.     

Lamellar structure in poly(ala-gly) determined by solid-state NMR and statistical mechanical calculations

Lamellar structure of poly(Ala-Gly) or (AG)n in the solid was examined using 13C solid-state NMR and statistical mechanical approaches. Two doubly labeled versions, [1-13C]Gly14[1-13C]Ala15- and [1-13C]Gly18[1-13C]Ala19 of (AG)15 were examined by two-dimensional (2D) 13C spin diffusion NMR in the solid state. In addition five doubly labeled [15N,13C]-versions of the same peptide, (AG) 15 and 15 versions labeled [3-13C] in each of the successive Ala residues were utilized for REDOR and 13C CP/MAS NMR measurements, respectively. The observed spin diffusion NMR spectra were consistent with a structure containing a combination of distorted beta-turns with a large distribution of the torsion angles and antiparallel beta-sheets. The relative proportion of the distorted beta-turn form was evaluated by examination of 13C CP/MAS NMR spectra of [3-13C]Ala-(AG)15. In addition, REDOR determinations showed five kinds of atomic distances between doubly labeled 13C and 15N nuclei which were also interpreted in terms of a combination of beta-sheets and beta-turns. Our statistical mechanical analysis is in excellent agreement with our Ala Cbeta 13C CP/MAS NMR data strongly suggesting that (AG)15 has a lamellar structure.     

Control of photoinduced energy- and electron-transfer steps in zinc porphyrin-oligothiophene-fullerene linked triads with solvent polarity

The dramatic changes of the lifetimes of the charge-separated (CS) states were confirmed in zinc porphyrin (ZnP)-oligothiophene (nT)-fullerene (C(60)) linked triads (ZnP-nT-C(60)) with the solvent polarity. After the selective excitation of the ZnP moiety of ZnP-nT-C(60), an energy transfer took place from the (1)ZnP moiety to the C(60) moiety, generating ZnP-nT-(1)C(60). In polar solvents, the CS process also took place directly via the (1)ZnP moiety, generating ZnP(*+)-nT-C(60)(*-), as well as the energy transfer to the C(60) moiety. After this energy transfer, an indirect CS process took place from the (1)C(60) moiety. In the less polar solvent anisole, the radical cation (hole) of ZnP(*+)-nT-C(60)(*-) shifted to the nT moiety; thus, the nT moiety behaves as a cation trapper, and the rates of the hole shift were evaluated to be in the order of 10(8) s(-1); then, the final CS states ZnP-nT(*+)-C(60)(*-) were lasting for 6-7 mus. In the medium polar solvent o-dichlorobenzene (o-DCB), ZnP-nT(*+)-C(60)(*-) and ZnP(*+)-nT-C(60)(*-) were present as an equilibrium, because both states have almost the same thermodynamic stability. This equilibrium resulted in quite long lifetimes of the CS states (450-910 mus) in o-DCB. In the more polar benzonitrile, the generation of ZnP-nT(*+)-C(60)(*-) was confirmed with apparent short lifetimes (0.6-0.8 mus), which can be explained by the fast hole shift to more stable ZnP(*+)-nT-C(60)(*-) followed by the faster charge recombination. It was revealed that the relation between the energy levels of two CS states, which strongly depend on the solvent polarity, causes dramatic changes of the lifetimes of the CS states in ZnP-nT-C(60); that is, the most appropriate solvents for the long-lived CS state are intermediately polar solvents such as o-DCB. Compared with our previous data for H(2)P-nT-C(60), in which H(2)P is free-base porphyrin, the lifetimes of the CS states of ZnP-nT-C(60) are approximately 30 times longer than those in o-DCB.     

Enhanced electrical properties of highly oriented poly(vinylidene fluoride) films prepared by solid‐state coextrusion

Oriented poly(vinylidene fluoride) (PVDF) films with β‐form crystals have been commonly prepared by cold drawing of a melt‐quenched film consisting of α‐form crystals. In this study, we have successfully produced highly oriented PVDF thin films (20 µm thick) with β‐crystals and a high crystallinity (55–76%), by solid‐state coextrusion of a gel film to eight times the original length at an established optimum extrusion temperature of 160°C, some 10°C below the melting temperature. The resultant drawn films had a highly oriented (orientation function f_c = 0.993) fibrous structure, showing high mechanical properties of an extensional elastic modulus of 8.3 GPa and tensile strength of 0.84 GPa, along the draw direction. Such highly oriented and crystalline films exhibited excellent ferroelectric and piezoelectric properties. The square hysteresis loop was significantly sharper than that of a conventional sample. The sharp switching transient yielded the remnant polarization P_r of 90 mC/m², and the electromechanical coupling factor k_t was 0.24 at room temperature. These values are about 1.5 times greater than those of a conventional β‐PVDF film. Thus, solid‐state coextrusion near the melting point was found to be a useful technique for the preparation of highly oriented and highly crystalline β‐PVDF films with superior mechanical and electrical properties. The morphology of the extrudate relevant to such properties is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2549–2556, 1999