Three-step drug extraction from a single sub-millimeter segment of hair and nail to determine the exact day of drug intake

Hair and nails are often used to prove drug intake over several months. However, it is impossible to determine the day of drug intake by conventional segmental analysis of bulk samples. To improve this segmental analysis, we prepared accurate 0.4-mm hair and 0.2-mm nail segments, which correspond to their respective growth rates of 1–2 days, using a tissue slicer. The aim of this study was to develop an efficient method to extract drugs from a single sub-millimeter segment of hair and nail. Hair and nails were collected from a subject who was administered a single dose of chlorpheniramine. Four drug extraction methods based on different principles such as sonication, microwaves, micropulverization, and alkaline dissolution were compared. Short-duration sonication followed by long-duration soaking served the aim. Drug extraction from a sub-millimeter segment was performed in three steps as follows: a segment was first washed, followed by sonication for 10 min soaking in the extraction solution for 24 h. The drug concentrations in the three extracts from each segment were quantified using high performance liquid chromatography-tandem mass spectrometry. Each concentration was displayed on a single hair strand and a single nail block so that the first, second, and third extracts corresponded to components on the surface, in the outer layer, and within the sample, respectively. The distribution of chlorpheniramine in a hair successfully reflected the intake history. This method can be used in the future to measure the detailed distribution of drugs in a single hair and nail.     

Picosecond time-resolved fluorescence study on solute-solvent interaction of 2-aminoquinoline in room-temperature ionic liquids: aromaticity of imidazolium-based ionic liquids

Time-resolved fluorescence spectra and fluorescence anisotropy decay of 2-aminoquinoline (2AQ) have been measured in eight room-temperature ionic liquids, including five imidazolium-based aromatic ionic liquids and three nonaromatic ionic liquids. The same experiments have also been carried out in several ordinary molecular liquids for comparison. The observed time-resolved fluorescence spectra indicate the formation of pi-pi aromatic complexes of 2AQ in some of the aromatic ionic liquids but not in the nonaromatic ionic liquids. The fluorescence anisotropy decay data show unusually slow rotational diffusion of 2AQ in the aromatic ionic liquids, suggesting the formation of solute-solvent complexes. The probe 2AQ molecule is likely to be incorporated in the possible local structure of ionic liquids, and hence the anisotropy decays only through the rotation of the whole local structure, making the apparent rotational diffusion of 2AQ slow. The rotational diffusion time decreases rapidly by adding a small amount of acetonitrile to the solution. This observation is interpreted in terms of the local structure formation in the aromatic ionic liquids and its destruction by acetonitrile. No unusual behavior upon addition of acetonitrile has been found for the nonaromatic ionic liquids. It is argued that the aromaticity of the imidazolium cation plays a key role in the local structure formation in imidazolium-based ionic liquids.     

Primary processes during the light-signal transduction of phototropin

Phototropin is a blue-light photoreceptor in plants that mediates phototropism, chloroplast relocation, stomata opening and leaf expansion. Phototropin molecule has two photoreceptive domains named LOV1 (light-oxygen-voltage) and LOV2 in the N-terminus and a serine/threonine kinase domain in the C-terminus, and acts as a blue light-regulated kinase. Each LOV domain binds a flavin mononucleotide as a chromophore and undergoes unique cyclic reactions upon blue-light absorption that comprises a cysteinyl-flavin adduct formation through a triplet-excited state and a successive adduct break to revert to the initial ground state. The molecular reactions underlying the photocycle are reviewed and one of the probable molecular schemes is presented. Adduct formation alters the secondary protein structure of the LOV domains. This structural change could be transferred to the linker between the kinase domain and involved in the photoregulation of the kinase activity. The structural changes as well as the oligomeric structures seem to differ between LOV1 and LOV2, which may explain the proposed roles of each domain in the photoregulation of the kinase activity. The photoregulation mechanism of phototropin kinase is reviewed and discussed in reference to the regulation mechanism of protein kinase A, which it resembles.     

Fluorescent behavior of 2‐(3,4,5,6‐tetrafluoro‐2‐hydroxyphenyl)imidazo‐[1,2‐a]pyridine in the presence of metal perchlorate

2‐(3,4,5,6‐Tetrafluoro‐2‐hydroxyphenyl)imidazo[1,2‐a]pyridine ( 1 ) emits long wavelength light around 540 nm both in polar and in nonpolar solvents. Zn²⁺ perchlorate in acetonitrile causes the intermediate wavelength emission around 430 nm, which is ascribed to the species where the imidazole nitrogen atom and the phenolate oxygen atom bridge Zn²⁺. In the presence of Hg²⁺ and Al³⁺ perchlorates, short wavelength emission around 370 nm is strongly increased and this fluorescent enhancement is attributable not to the coordination of Hg²⁺ and Al³⁺ to 1 but to the formation of the salt of perchloric acid of 1 .     

Polymer brushes in nanopores surrounded by silicon-supported tris(trimethylsiloxy)silyl monolayers

A chemically grafted tris(trimethylsiloxy)silyl (tris(TMS)) monolayer on a silicon oxide substrate was used as a template for creating nanoclusters of polymer brushes. Polymer brushes were synthesized by surface-initiated polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) and tert-butyl methacrylate (t-BMA) via atom transfer radical polymerization (ATRP) from alpha-bromoester groups tethered to the residual silanol groups on the silicon surface after generating a range of tris(TMS) coverage. CuBr/bpy and CuBr/PMDETA were used as the catalytic system for PMPC and Pt-BMA synthesis, respectively. The percentage of tris(TMS) coverage significantly influenced the thickness and morphology of the polymer brushes. Protrusions representing self-aggregation of PMPC brushes in nanopores as visualized by AFM analysis evidently suggested that PMPC brushes were distributed nanoscopically on the surface. The protrusion size and surface roughness corresponded quite well with the graft density of PMPC brushes. The fact that Pt-BMA brushes grown from nanopores were almost featureless implies that self-aggregation of PMPC brushes is truly a consequence of phase incompatibility between hydrophilic PMPC brushes and hydrophobic tris(TMS). The anti-fouling characteristic of PMPC brushes, inferred from plasma protein adsorption, was subsequently varied by controlling the surface coverage ratio between PMPC brushes and tris(TMS).     

Surface modification with well-defined biocompatible triblock copolymers Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface

To improve interfacial phenomena of poly(dimethylsiloxane) (PDMS) as biomaterials, well-defined triblock copolymers were prepared as coating materials by reversible addition-fragmentation chain transfer (RAFT) controlled polymerization. Hydroxy-terminated poly(vinylmethylsiloxane-co-dimethylsiloxane) (HO–PV_lD_mMS–OH) was synthesized by ring-opening polymerization. The copolymerization ratio of vinylmethylsiloxane to dimethylsiloxane was 1/9. The molecular weight of HO–PV_lD_mMS–OH ranged from (1.43 to 4.44) × 10⁴, and their molecular weight distribution (M_w/M_n) as determined by size-exclusion chromatography equipped with multiangle laser light scattering (SEC-MALS) was 1.16. 4-Cyanopentanoic acid dithiobenzoate was reacted with HO–PV_lD_mMS–OH to obtain macromolecular chain transfer agents (macro-CTA). 2-Methacryloyloxyethyl phosphorylcholine (MPC) was polymerized with macro-CTAs. The gel-permeation chromatography (GPC) chart of synthesized polymers was a single peak and M_w/M_n was relatively narrow (1.3–1.6). Then the poly(MPC) (PMPC)–PV_lD_mMS–PMPC triblock copolymers were synthesized. The molecular weight of PMPC in a triblock copolymer was easily controllable by changing the polymerization time or the composition of the macro-CTA to a monomer in the feed. The synthesized block copolymers were slightly soluble in water and extremely soluble in ethanol and 2-propanol.

Surface modification was performed via hydrosilylation. The block copolymer was coated on the PDMS film whose surface was pretreated with poly(hydromethylsiloxane). The surface wettability and lubrication of the PDMS film were effectively improved by immobilization with the block copolymers. In addition, the number of adherent platelets from human platelet-rich plasma (PRP) was dramatically reduced by surface modification. Particularly, the triblock copolymer having a high composition ratio of MPC units to silicone units was effective in improving the surface properties of PDMS.

By selective decomposition of the Si–H bond at the surface of the PDMS substrate by irradiation with UV light, the coating region of the triblock copolymer was easily controlled, resulting in the fabrication of micropatterns. On the surface, albumin adsorption was well manipulated.     

Microrheology of chemically crosslinked polymer gels by diffusing-wave spectroscopy

The Brownian motion of probe particles in aqueous solutions of poly(vinyl alcohol)(PVA) and in chemically crosslinked PVA gels has been studied by diffusing-wave spectroscopy (DWS). At long time scales the measurements allow us to determine the effect of the crosslinking ratio on the macroscopic viscosity of sols and the shear modulus of gels. The local shear modulus of gels as obtained from the characteristic length of the Brownian cage was found to agree with that measured by classical rheometry and dynamic light scattering (DLS). These microrheological techniques were applied to two polymer gel systems. Substrate induced gradient structure of hydrogels was studied from a microrheological point of view using DLS. It is clearly seen that hydrophobic substrate induces weakly crosslinked network formation at the interface region up to a few millimeters as expected from other experimental facts. Magnetic particle motion in gels under external magnetic field was investigated by DWS. The translational motion of the magnetic particles in gels due to the alternating magnetic force can be detected and found to be superimposed on the relaxation due to the thermal motion.     

Shape Estimation of Anisometric Particles Using Size Measurement Techniques

This study was conducted to establish a simple method for evaluating the morphology of fine anisometric particles using size measurement techniques. The size distributions of mica particles and carbon fibers classified into narrower size ranges were measured by gravitational sedimentation and laser diffraction techniques. The ratio of mean diameters determined for flaky particles strongly depended on the aspect ratio, i.e. flatness. The relationship between particle shape and diameter is discussed theoretically. The experimental results were similar to those predicted. The flatness of fine particles can be evaluated by the ratio of the median diameter determined by laser diffraction to that determined by sedimentation.