Studies on the formation of aliphatic aldehydes in the plasma and liver of vitamin E-deficient rats

The effects of vitamin E (E) deficiency on the formation of aliphatic aldehydes in rat plasma and liver were studied. Three-week-old Wistar male rats were fed either an E supplemented diet (2-ambo-alpha-tocopheryl acetate 20 mg/kg diet, designated as E supplemented diet group) or an E deficient diet (E deficient diet group). After 8 weeks, n-hexanal and (E)-4-hydroxy-2-nonenal (4-HN) in the plasma of the E deficient diet group were found to be 2.0 and 2.5-fold greater than those of the E supplemented diet group, respectively. The contents of aldehydes such as n-pentanal, n-hexanal, 4-HN in the liver were also significantly higher in the E deficient diet group than in the E supplemented diet group. These results indicate that some aldehydes, arising possibly from lipid peroxides, are produced and detected in the plasma and liver of rats under the condition like E deficiency. In this study we further found that the activity of the liver aldehyde dehydrogenase (ALDH, EC 1.2.1.3) was significantly changed; 5 and 8 weeks after the start it was lower in the E deficient diet group when compared to that in the E supplemented diet group. The decrease of enzyme activity was related to the increase of aldehydes such as n-hexanal in the liver. the aldehyde increase in the plasma of the E deficient diet group was thought to raise the injury of cells, namely, a strong hemolysis on erythrocytes prepared from the blood of rats fed the E deficient diet.     

Facile deposition of [60]fullerene and carbon nanotubes on ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene

It was found that [60]fullerene encapsulated in p-sulfonatocalix[8]arene and single-walled carbon nanotubes (SWNTs) solubilized by sodium dodecylsulfate can be readily deposited on the ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene (EDOT) without chemical modification of these carbon clusters. The driving force for the deposition is an electrostatic interaction between the anionic complexes and the cationic charges of poly(EDOT) formed in the oxidative polymerization process. The surface morphology was thoroughly characterized by scanning electron micrograph: the [60]fullerene/poly(EDOT) film is covered by nano-particles with 20-100 nm diameters whereas the SWNTs/poly(EDOT) film is covered by nanorods with several microm length and ca. 100 nm diameter. The results indicate that the anionic complexes act as nuclei for the polymer growth in the oxidation polymerization. Interestingly, when these modified ITO electrodes were photoirradiated, the appearance of a photocurrent wave was observed. The action spectra showed that the photoexcited energy of [60]fullerene or SWNTs is efficiently collected by the electroconductive poly(EDOT) film and transferred to the ITO electrode.     

High‐Quality Three‐Dimensional Nanoporous Graphene

We report three‐dimensional (3D) nanoporous graphene with preserved 2D electronic properties, tunable pore sizes, and high electron mobility for electronic applications. The complex 3D network comprised of interconnected graphene retains a 2D coherent electron system of massless Dirac fermions. The transport properties of the nanoporous graphene show a semiconducting behavior and strong pore‐size dependence, together with unique angular independence. The free‐standing, large‐scale nanoporous graphene with 2D electronic properties and high electron mobility holds great promise for practical applications in 3D electronic devices.     

Capsule–Capsule Conversion by Guest Encapsulation

Guest‐induced M₁₈L₆–M₂₄L₈ capsule–capsule conversion is reported. Both capsules are composed of Pd^II ethylenediamine units (M) and 1,3,5‐tris(3,5‐pyrimidyl)pyrimidine (L), and form trigonal bipyramidal (M₁₈L₆) and octahedral (M₂₄L₈) closed‐shell structures with huge hydrophobic inner spaces. The M₁₈L₆ trigonal bipyramid is converted to the M₂₄L₈ octahedron through encapsulation of large aromatic guests, with the latter capsule possessing a cavity volume three times larger than the former. Despite the dynamic properties of the capsule host, the encapsulated guests are difficult to extract and are thus isolated from the external environment.     

New Synthetic Method for Bicyclic Compounds Through a Sequence of Ene-Type Chlorination,Palladium Catalyzed Dehydrochlorination,and Intramolecular Diels-Alder Reaction

A sequence of ene-type chlorination, palladium catalyzed dehydrochlorination, and the intramolecular Diels-Alder reaction afforded a new method for conversion of prenyl derivatives into bicyclic compounds.     

Development of a stable isotope dilution UPLC‐MS/MS method for quantification of dexmedetomidine in a small amount of human plasma

Dexmedetomidine (Dex) is a selective central α2‐agonist with anesthetic properties and has been used in clinical practice for sedation in the intensive care unit (ICU) after operations. In this study, an analytical assay for the determination of Dex in a small amount of plasma was developed for the application to pediatric ICU trials. The quantification of Dex was constructed using the original stable isotope Dex‐d₃ for electrospray ionization‐tandem mass spectrometry (ESI‐MS/MS) in the selected reaction monitoring mode. A rapid ultra‐performance liquid chromatography technique was adopted using ESI‐MS/MS with a runtime of 3 min. Efficacious concentration levels (50 pg/mL to 5 ng/mL) could be evaluated using a very small amount of plasma (10 μL) from patients. The lower limit of the quantification was 5 pg/mL in the plasma (100 µL). For sample preparation, a solid‐phase extraction was used along with the OASIS‐HLB cartridge type. Recovery values ranged from 98.8 to 100.3% for the intra‐ [relative standard deviation (RSD), 0.9–1.3%] and inter‐ (RSD, 0.9–1.5%) day assays. A stable test had recovery values that ranged from 97.8 to 99.7% with an RSD of 1.0–1.9% for the process/wet extract, bench‐top, freeze–thaw and long‐term tests. This method was used to measure the Dex levels in plasma from pediatric ICU patients. In the clinical ICU trial, the small amount of blood (approximate plasma volume, 200 μL) remaining from blood gas analysis was reused and targeted for the clinical analysis of Dex in plasma. Copyright © 2013 John Wiley & Sons, Ltd.     

Adsorption of ammonia and water on functionalized edge-rich carbon nanofibers

The preparation, characterization and ammonia and water adsorption properties of edge-rich carbon nanofibers (CNFs) were studied, including platelet CNFs (PCNFs) and cup-stacked CNFs (CSCNFs). Since PCNFs and CSCNFs have many chemically active exposed edges, functionalization by oxidizing the edges was carried out by ozone stream and by nitric acid. Transmission electron microscopy, N₂ adsorption isotherms and temperature-programmed desorption analysis showed that the nitric acid treatment partly destroyed the graphite structure of the PCNFs and created acid functional groups and micropores, whereas the ozone treatment created functional groups without damaging the structure. Ammonia adsorption isotherms clarified that NH₃ adsorption on PCNFs and CSCNFs occurred mainly on oxygen-containing groups, whereas the adsorption on activated carbon fibers (ACFs) occurred on both oxygen-containing groups and the carbon surface without the functional groups, and the CSCNFs showed larger amounts of adsorbed ammonia compared to the PCNFs. Especially at a relatively low pressure range (<0.2 atm), the PCNFs/CSCNFs/ACFs showed the same ammonia adsorption mechanism; that is, the one-to-one interaction between oxygen atoms in the functional groups and hydrogen atoms in ammonia molecules. In addition, the adsorption on the ACFs appeared to occur mainly by interaction with the carbon surface at relatively high pressure (0.3–1.0 atm). Our experimental results and previous findings suggest that NH₃ adsorption on PCNFs is due mainly to NH…O hydrogen bonding between oxygen-containing groups and ammonia rather than to chemical bonding.     

High-speed deposition of RE123 film with large current capacity by hot-wall type PLD system

We have studied a hot-wall heating system to produce GdBa₂Cu₃O_y (GdBCO) films with large critical currents (I_c) at a high production rate by a pulsed-laser-deposition (PLD) method. GdBCO films fabricated at a production rate of 30 m/h under the optimized conditions, especially a distance of 95 mm between the target and the substrate (T–S), exhibited high critical current densities (J_c) of about 3 MA/cm² and I_c over 300 A at a thickness of 1–2 μm. Furthermore, long GdBCO tapes prepared by repeated depositions at each tape-passing speed of 80 m/h showed uniform I_c distribution along the longitudinal direction, because the hot-wall system enabled to stabilize temperature within a few degrees at 800 °C. A 170 m long tape with I_c over 600 A was successfully fabricated at a production rate of 16 m/h using a laser power of 360 W.     

Synthesis of Unsaturated Nitriles from Trisubstituted Olefins Via Ene-Type Chlorination

Unsaturated nitriles have been synthesized from trisubstituted olefins via ene-type chlorination and regioselective substitution with cyanide ion followed by double bond migration.