Comparison between aesthetic and thermal performances of copper oxide and titanium dioxide nano-particulate coatings

Nano-particulate coatings with high reflectance against solar irradiation can control undesirable thermal heating by sunlight absorption. It can reduce the energy consumption for air conditioning of houses and cars. For the objects covered by these coatings and subjected to human sight, e.g. roofing surfaces, high dazzle of reflected visible light can offend the human eyes and spoil the fine view of covered objects. The authors introduced a new optimization method in designing pigmented coatings which considers both thermal and aesthetic effects in previous studies. The optimization is possible by controlling the material, size and concentration of pigment particles. The proposed coatings maximize the reflectance of near infrared (NIR) region to care the thermal effects and minimize the visible (VIS) reflected energy to keep the dark tone because of aesthetic appeal. Two different types of copper oxide pigment particles namely cupric oxide (CuO) and cuprous oxide (Cu₂O) were considered in this study. The optimum characteristics and performances are obtained and compared with titanium dioxide (TiO₂) particle as a typical cool pigment. The results show that cupric oxide has much better performance for our objective.     

Solid‐State Phosphorescence of trans‐Bis(salicylaldiminato)platinum(II) Complexes Bearing Long Alkyl Chains: Morphology Control towards Intense Emission

Morphology control for intense solid‐state phosphorescence of non‐emissive, but potentially emissive crystals of platinum complexes and the mechanistic rationale are described. A series of trans‐bis(salicylaldiminato)platinum(II) complexes bearing linear alkyl chains ( 1 a : n=5; 1 b : n=8; 1 c : n=12; 1 d : n=14; 1 e : n=16; 1 f : n=18) was synthesized and the solid‐state emission properties were examined by using crystals/aggregates prepared under various precipitation conditions. Crystals of 1 e , prepared using “kinetic” conditions including rapid cooling, high concentrations, and poor solvents, emit intensive yellow phosphorescence (λ_max=545 nm) under UV irradiation at 298 K with an absolute quantum efficiency of 0.36, whereas all the crystals of 1 a – 1 f prepared using “thermodynamic” conditions including slow cooling, low concentrations, and good solvents were either non‐ or less emissive with Φ_298K values of 0.12 ( 1 a ), 0.11 ( 1 b ), 0.10 ( 1 c ), 0.07 ( 1 d ), 0.02 ( 1 e ), and 0.02 ( 1 f ) under the same measurement conditions. The amorphous solid 1 e , prepared by rapid cooling and freeze‐drying, was also non‐emissive (Φ_298K=0.02, 0.02). Temperature‐dependent emission spectra showed that the kinetic crystals of 1 e exhibit high heat‐resistance towards emission decay with increasing temperature, whereas the amorphous solid 1 e is entirely heat‐quenchable. This is a rare example of the change from a non‐emissive crystal into a highly emissive crystal by morphology control through crystal engineering. Emission spectra and powder X‐ray diffraction (XRD) patterns of the emissive, kinetic crystals of 1 e are clearly distinct from those of the less emissive, thermodynamic crystals of 1 a – 1 f . Single‐crystal XRD unequivocally establishes that the thermodynamic crystals of 1 d have a multilayered lamellar structure supported by highly regulated, consecutive π‐stacking interactions between imine moieties, whereas the kinetic crystals of 1 e have a face‐to‐edge lamellar structure with less stacking. These results lead to the conclusion that 1) morphology control of long‐chained complexes exclusively generates a metastable herringbone‐based lamellar packing motif that exhibits intense emission and high heat‐resistance, while 2) a thermodynamically stable, highly regulated, consecutive stacking motif is unfavorable for solid‐state emission.     

A purification system for 64Cu produced by a biomedical cyclotron for antibody PET imaging

Ion exchange is a simple and efficient method for separating no-carrier-added ⁶⁴Cu from an irradiated Ni target. We developed a semi-automated two-round ⁶⁴Cu separation system equipped with a strong-base anion exchange resin column. We first verified the efficiency of the system using a non-radioactive substitute consisting of 25 mg of Ni and 127 ng of Cu, and confirmed that Cu was completely eluted at the second round of the separation step. After the bombardment, separation of ⁶⁴Cu from the Ni target was achieved with high radiochemical purity. ⁶⁴Cu produced and separated in this study had an extremely low level of Ni impurity. It could be used for labeling monoclonal antibodies for antibody positron emission tomography imaging and synthesizing radiopharmaceuticals.     

Highly C6-selective and quantitative modification of cellulose: nucleoside-appended celluloses to solubilize single walled carbon nanotubes

Cellulose derivatives having thymidine and/or trimethylammonium appendages exclusively at C6 positions can be prepared in a convenient manner through C6-selective bromination/azidation on cellulose to afford 6-azido-6-deoxycellulose followed by chemoselective [3 + 2] cycloadditions using Cu⁺ as a catalyst. These cellulose derivatives take unique sheet-like structures and function as “wrapping papers” to effectively disperse single-walled carbon nanotubes in water.     

Ultrasound-induced emission enhancement based on structure-dependent homo- and heterochiral aggregations of chiral binuclear platinum complexes

Instant and precise control of phosphorescent emission can be performed by ultrasound-induced gelation of organic liquids with chiral, clothespin-shaped trans-bis(salicylaldiminato)Pt(II) complexes, anti-1. Nonemissive solutions of racemic, short-linked anti-1a (n = 5) and optically pure, long-linked anti-1c (n = 7) in organic liquids are transformed immediately into stable phosphorescent gels upon brief irradiation of low-power ultrasound. Emission from the gels can be controlled by sonication time, linker length, and optical activity of the complexes. Several experimental results indicated that structure-dependent homo- and heterochiral aggregations and ultrasound-control of the aggregate morphology are key factors for emission enhancement.     

Radiation chemical yields for loss of ether and carbonate ester bonds in PADC films exposed to proton and heavy ion beams

Chemical modification along ion tracks in PADC films has been studied by means of FT-IR spectrometry, which was exposed to proton and heavy ions of He, C, Ne, Ar, Fe, Kr and Xe with energies around the Bragg peaks. This study covers a wide region of the stopping power ranging from 10 to 10,000 keV/μm. Removal cross sections for the loss of ether and carbonate ester bonds are assessed for each ion, as a function of the stopping power. Chemical damage parameters like the damage density, the effective track core radius and the radiation chemical yields, G values (scissions/100 eV), for each bond are also derived. We have found anomalous dependence of these parameters on the stopping power. The G value for the loss of carbonate ester bond decreased from 20 for proton down to 5 for C and Ne ions, and then increased with atomic number of heavy ions up to 8 for Xe ion. Radial dose distribution for each ion has been also calculated. Results are discussed from the viewpoint of polymeric structure of PADC that consists of two parts with different radio-sensitivities.     

High-Spin Nitrene Fine-Structure ESR Spectroscopy in Frozen Rigid Glasses: Exact Analytical Expressions for the Canonical Peaks and A D-Tensor Gradient Method for Line Broadening

In high-spin chemistry, random-orientation fine-structure electron paramagnetic resonance (FS ESR) spectroscopy holds the advantages of the most facile and convenient method to identify high-spin systems. The FS ESR spectroscopy for high spins in frozen rigid glasses has seemingly been well established since the first spin-quintet m-dicarbene and m-dinitrene appeared in 1967. The FS ESR spectra of organic quintet entities generated by photolysis in the 2-methyltetrahydrofuran (2-MTHF) glass, however, have never been fully analyzed due to a peculiar line broadening appearing at many canonical peaks. The line broadening has been a notorious obstacle that masks key FS transitions of many cases in organic glasses or argon matrices. We examine the origin of the line broadening, illustrating the comprehensive spectral analysis for m-dinitrenes and other types of typical quintet-state dinitrenes observed in the 2-MTHF glass. Our new approach to the line broadening analysis invokes both exact analytical solutions for the resonance fields of canonical peaks and a magnetic-parameter gradient method. We have derived the exact analytical expressions for FS canonical peaks for high-spin states, for the first time. A microscopic origin of the line broadening observed for high-spin nitrenes generated by photolysis in rigid glasses is proposed on the basis of quantum chemical calculations of the D-tensor.     

末端化聚酰胺和交联剂及光酸产生剂所组成的三元负型光敏支化聚酰胺

研究了由未端化支化聚酰胺、交联剂(MBHP)和光酸产生剂(PTMA)所组成的三元负型光敏聚合物体系.其中,不对称ABB′型单体4-(2,4-二氨基苯氧基)苯甲酸3在亚磷酸三苯酯(TPP)和吡啶(Py)的存在下,通过缩合聚合得到支化聚酰胺a,由其1H-NMR数据计算得支化度(DB)为0.36.接着用肉桂酰氯对支化聚酰胺进行末端化.采用IR,1H-NMR,GPC,TG/DTA对支化聚酰胺和末端化支化聚酰胺b的结构和性能进行了表征.由85wt%末端化支化聚酰胺b、10wt%交联剂(MBHP)和5wt%光酸产生剂(PTMA)所组成的光敏聚合物体系,在100℃预烘10min,采用436nm(g-line)紫外光曝光,随后在25℃于二甲基甲酰胺中显影10s,用水漂洗,110℃后烘3min后,得到负型图案,边界清晰且分辨率达40μm.