Resonance ionization spectroscopy: How a new field expands

A scientometric study of communication and growth of a new development of physics, resonance ionization spectroscopy, has been made. Formal (journal publications) and informal (talks, lecures) communication patterns have been studied. Self citation dominates in early publications, but drops off as the field expands. Informal communication leads formal only by about a year in time, but is much larger in number.     

An evaluation of the performance of porous polymer monolith assisted electrospray

A novel electrospray interface, which has distinct advantages over conventional pulled silica emitters, has been developed. This novel interface can be easily fabricated by forming a porous polymer monolith (PPM) at the end of a fused-silica capillary that facilitates a stable electrospray over a wide range of flow rates with only a modest increase in back-pressure. A comparison was made between the PPM-assisted electrospray and a commercial nanosprayer in terms of sensitivity, stability and robustness. A PPM-filled electrospray tip produced a day-to-day signal variation of 23% relative standard deviation (RSD) over a 3-day period when spraying a 1.0 microM test peptide solution. Furthermore, three different capillaries fabricated by the same process produced a signal variation of 17% RSD, indicating that the fabrication process shows good reproducibility. The multiple flow paths of the PPM function to split the flow and reduce clogging. Even following the accumulation of debris after prolonged use, a stable spray could still be generated with the PPM-filled capillary while the commercial nanosprayer ceased to function properly. In terms of sensitivity, PPM-assisted electrospray showed an enhancement in sensitivity at infusion flow rates between 100 to 1000 nL/min while commercial nanosprayers performed slightly better at flow rates below 100 nL/min. A sample purification step can be combined with the PPM-assisted sprayer, using the PPM as a stationary phase to desalt and preconcentrate samples prior to mass spectrometric detection.     

Microfabrication of three-dimensional bioelectronic architectures

The functionality and structural diversity of biological macromolecules has motivated efforts to exploit proteins and DNA as templates for synthesis of electronic architectures. Although such materials offer promise for numerous applications in the fabrication of cellular interfaces, biosensors, and nanoelectronics, identification of techniques for positioning and ordering bioelectronic components into useful patterns capable of sophisticated function has presented a major challenge. Here, we describe the fabrication of electronic materials using biomolecular scaffolds that can be constructed with precisely defined topographies. In this approach, a tightly focused pulsed laser beam capable of promoting protein photo-cross-linking in specified femtoliter volume elements is scanned within a protein solution, creating biomolecular matrices that either remain in integral contact with a support surface or extend as free-standing structures through solution, tethered at their ends. Once fabricated, specific protein scaffolds can be selectively metallized via targeted deposition and growth of metal nanoparticles, yielding high-conductivity bioelectronic materials. This aqueous fabrication strategy opens new opportunities for creating electronic materials in chemically sensitive environments and may offer a general approach for creating microscopically defined inorganic landscapes.     

Measurement of PCDDs, PCDFs, and non-ortho-PCBs by comprehensive two-dimensional gas chromatography-isotope dilution time-of-flight mass spectrometry (GC x GC-IDTOFMS)

Comprehensive two-dimensional gas chromatography with isotope-dilution time-of-flight mass spectrometry (GC × GC-IDTOFMS) was used to measure polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), and coplanar polychlorinated biphenyl (cPCB) concentrations in ash, sediment, vegetation, and fish samples. The GC × GC capability was achieved by using a quad jet, dual stage, thermal modulator. Zone compression of the GC peaks from modulation resulted in a significant increase of the signal intensity over classical GC-IDTOFMS. The GC × GC column set used an Rtx-Dioxin 2 phase as the first dimension (¹D) and an Rtx-500 as the second dimension (²D). The chromatographic separation of the 17 PCDD/Fs and the 4 cPCBs was attained in ¹D except for 2,3,7,8-TCDD and CB126 for which deconvoluted ion currents (DIC) were required to be reported separately. The Rtx-500 phase separated the bulk matrix interfering compounds from the target analytes in ²D. The instrumental limit of detection (iLODs) was 0.5 pg for 2,3,7,8-TCDD. The calibration curves showed good correlation coefficients for all the compounds investigated in the concentration range of 0.5–200 pg. GC × GC-IDTOFMS results compared favorably to those from conventional isotope-dilution one-dimensional gas chromatography-high resolution mass spectrometry (GC-IDHRMS). The comprehensive mass analysis of the TOFMS further permitted the identification of other contaminants of concern in the samples.     

Sensitivity-enhanced quantitative 13C NMR spectroscopy via cancellation of 1J(CH) dependence in DEPT polarization transfers

A scheme has been developed to eliminate virtually all signal intensity dependence on 1JCH in polarization transfers between 1H and 13C nuclei, reducing differences in signal intensity to only 1.5% over the entire natural 1JCH range. The scheme relies on the summation of time-domain data acquired with four suitably selected Delta delays so that the J dependence is essentially canceled in the final, signal-averaged free-induction decay. These Delta delays have been incorporated into the DEPT pulse sequence to create sensitivity-enhanced experiments for collecting quantitative 13C{1H} spectra. Four experiments, each with unique read pulse angles, give quantitative spectra with 200-300% more sensitivity than conventional 13C spectra acquired with inverse-gated 1H decoupling. The experiments are ideal for recording spectra with improved quantitative information or for substantially reducing the long acquisition times indicative of quantitative 13C experiments. The ability of the experiments to provide quantitative spectra was demonstrated with a simple ethylbenzene solution, however, they can easily be adapted to various applications for analysis of complex mixtures.     

In-lens cryo-high resolution scanning electron microscopy: methodologies for molecular imaging of self-assembled organic hydrogels.

The micro- and nanoarchitectures of water-swollen hydrogels were routinely analyzed in three dimensions at very high resolution by two cryopreparation methods that provide stable low-temperature specimens for in-lens high magnification recordings. Gemini surfactants (gS), poly-N-isopropylacrylamides (p-NIP Am), and elastin-mimetic di- (db-E) and triblock (tb-E) copolymer proteins that form hydrogels have been routinely analyzed to the sub-10-nm level in a single day. After they were quench or high pressure frozen, samples in bulk planchets were subsequently chromium coated and observed at low temperature in an in-lens field emission SEM. Pre-equilibrated planchets (4-40 degrees C) that hold 5-10 microl of hydrogel facilitate dynamic morphological studies above and below their transition temperatures. Rapidly frozen samples were fractured under liquid nitrogen, low-temperature metal coated, and observed in-lens to assess the dispersion characteristics of micelles and fragile colloidal assemblies within bulk frozen water. Utilizing the same planchet freezing system, the cryoetch-HRSEM technique removed bulk frozen water from the hydrogel matrix by low-temperature, high-vacuum sublimation. The remaining frozen solid-state sample faithfully represented the hydrogel matrix. Cryo- and cryoetch-HRSEM provided vast vistas of hydrogels at low and intermediate magnifications whereas high magnification recordings and anaglyphs (stereo images) provided a three-dimensional prospective and measurements on a molecular level.     

Microdetermination of fluorine in organo-metallic compounds

Summary A simple and fast method for the determination of fluorine in organic compounds is given. After closed-flask combustion, fluoride is measured by a solid state electrode. The procedure is applicable to organo-metallic compounds, but boron interferes.

---

Zusammenfassung Eine einfache Methode zur raschen Fluorbestimmung in organischen Verbindungen wurde angegeben. Nach Verbrennung im verschlossenen Kolben wird das Fluorid mit einer ionenspezifischen Elektrode gemessen. Das Verfahren ist für metallorganische Verbindungen anwendbar, aber Bor stört die Bestimmung.

     

Identification and quantitative analysis of nitrogen-containing polycyclic aromatic hydrocarbons in sediments

An integrated analytical methodology has been developed for determining nitrogen-containing polycyclic aromatic hydrocarbons, which enables quantitation of individual contaminants as low as 1 μg/kg in sediment samples. A cross-sectional profile from the Hamilton Harbour sediment samples was analyzed for azaarenes. These contaminants were separated by Soxhlet extraction, and pH adjustment allowed their isolation from different classes of neutral and acidic components. Separation and identification of the organic bases in each sample were achieved by using open tubular column gas chromatography with thermionic detection and HRGC-mass spectrometry. Organic bases present in the samples included mostly azaarenes such as acridines, benzacridines, azafluorene, benzoquinolines, azapyrenes, etc. Quantitation and environmental significance of these compounds are discussed. Recoveries of individual azaarenes at two different levels were evaluated. Data presented indicate that detection limits of this method are between 1 and 10 μg/kg. Recovery azaarenes from bottom sediment samples at concentration levels between 1 to 100 μg/kg is 81 ± 17%.     

Yes, no and maybe

Johnny Mercer had a hit song a few decades ago in which he admonished us to accentuate the positive, eliminate the negative, hold on the affimative and to have nothing to do with in between. This seems like good advice, but as is the case with most good advice it is rather hard to follow and not always applicable.     

Scalable synthesis of palladium nanoparticle catalysts by atomic layer deposition

Potential applications in drug delivery from nanostructures composed of two oppositely charged polymethacrylates, eudragit^? L100 (EL) and eudragit^? EPO (EE), loaded with three model basic drugs (D), atenolol, propranolol, and metroclopramide were evaluated. The self-organized nanoparticles based on drug-interpolyelectrolyte complexes (DIPEC), (EL-D₅₀)?CEE_X, were obtained by mixing the aqueous dispersions of both polyelectrolytes at room temperature in an ultrasound bath. Dispersions of (EL-D₅₀) neutralized with increasing proportions of EE exhibited a rise of turbidity, particle sizes in the range of 150?C400?nm, and high negative zeta potential. The sign of zeta potential was shifted from negative to positive by changes in composition of DIPEC. Freeze dried DIPEC were easily redispersed in water yielding nearly the same parameters of fresh dispersions. In vitro release experiments using Franz cells showed that DIPEC systems behave as a drug reservoir that slowly releases the drug as water is placed in the receptor compartment. The release rate was raised by ionic exchange with counterions present in simulated physiological fluids placed in the receptor media. Delivery of D from DIPEC exhibited a remarkable robustness toward simulated physiological media of different pH. The DIPEC systems exhibit interesting properties to design nanoparticulate drug delivery systems for oral and/or topical routes.