Preparation of Langmuir/Blodgett-cellulose Surfaces by Using Horizontal Dipping Procedure. Application for Polyelectrolyte Adsorption Studies Performed with QCM-D

A method of preparing model cellulose surfaces by the Langmuir–Blodgett (LB) technique with horizontal dipping procedure has been developed. The primary aim for the use of these surfaces was adsorption studies performed with the quartz crystal microbalance with dissipation (QCM-D) instrument. Hydrophobised cellulose (trimethylsilyl cellulose, TMSC) was deposited on the hydrophobic, polystyrene-coated QCM-D crystal. After 15 dipping cycles, the TMSC film fully covers the crystal surface. TMSC can easily be hydrolysed back to cellulose with acid hydrolysis. With this method a smooth, rigid, thin and reproducible cellulose film was obtained. Its morphology, coverage, chemical composition and wetting was further characterised using atomic force microscopy (AFM), X-Ray photoelectron spectroscopy (XPS), and contact angle measurements. The swelling behaviour and the stability of the cellulose film in aqueous solutions at different ionic strengths were studied using the QCM-D instrument. The swelling/deswelling properties of the cellulose film were those expected of polyelectrolytes with low charge density; some swelling occurred in pure water and the swelling decreased when the ionic strength was increased. No significant layer softening was detected during the swelling. The effect of electrolyte concentration and polymer charge density on the adsorption of cationic polyelectrolytes on the cellulose surface was also investigated. At low electrolyte concentration less of the highly charged PDADMAC was adsorbed as compared to low charged C-PAM. The adsorbed amount of PDADMAC increased with increasing ionic strength and a more compact layer was formed while the effect of electrolyte concentration on the adsorption of C-PAM was not as pronounced.     

Resolution of racemic 2-aminocyclohexanol derivatives and their application as ligands in asymmetric catalysis

A preparatively easy and efficient protocol for the resolution of racemic 2-aminocyclohexanol derivatives is described, delivering both enantiomers with >99% enantiomeric excess (ee) by sequential use of (R)- and (S)-mandelic acid. A simple aqueous workup procedure permits the isolation of the amino alcohols in analytically pure form and the almost quantitative recovery of mandelic acid. Debenzylation of enantiopure trans-2-(N-benzyl)amino-1-cyclohexanol by hydrogenation and subsequent derivatization give access to a broad variety of diversely substituted derivatives. Furthermore, the corresponding cis isomers are readily available. Applications of these optically active aminocyclohexanols in catalyzed asymmetric phenyl transfer reactions to benzaldehydes and transfer hydrogenations of aryl ketones lead to products with up to 96% ee.     

Crystal structure of potassium tris[3-(2-pyridyl)pyrazolyl]hydroborate

The crystal structure of the potassium tris[3-(2-pyridyl)pyrazolyl]hydroborate has been determined. Potassium tris[3-(2-pyridyl)pyrazolyl]hydroborate crystallizes in the orthorhombic space group Pca2₁ with the parameters a=30.7323(5) ?, b=8.3083(1) ? and c=9.2173(2) ?, V=2353.48(7) ?³ with Z=4. The crystal structure reveals the formation of continuous chains where two bidentate arms of the hydroborate ligand are coordinated to one potassium and the third to another cation. The structures of numerous transition metal and actinide salts have been reported during the last decades but no alkali metal complexes were available.     

Enhanced water vapor barrier properties for biopolymer films by polyelectrolyte multilayer and atomic layer deposited Al2O3 double-coating

Commercial polylactide (PLA) films are coated with a thin (20 nm) non-toxic polyelectrolyte multilayer (PEM) film made from sodium alginate and chitosan and additionally with a 25-nm thick atomic layer deposited (ALD) Al₂O₃ layer. The double-coating of PEM + Al₂O₃ is found to significantly enhance the water vapor barrier properties of the PLA film. The improvement is essentially larger compared with the case the PLA film being just coated with an ALD-grown Al₂O₃ layer. The enhanced water vapor barrier characteristics of the PEM + Al₂O₃ double-coated PLA films are attributed to the increased hydrophobicity of the surface of these films.     

Mixtures of Thermostable Enzymes Show High Performance in Biomass Saccharification

Optimal enzyme mixtures of six Trichoderma reesei enzymes and five thermostable enzyme components were developed for the hydrolysis of hydrothermally pretreated wheat straw, alkaline oxidised sugar cane bagasse and steam-exploded bagasse by statistically designed experiments. Preliminary studies to narrow down the optimization parameters showed that a cellobiohydrolase/endoglucanase (CBH/EG) ratio of 4:1 or higher of thermostable enzymes gave the maximal CBH-EG synergy in the hydrolysis of hydrothermally pretreated wheat straw. The composition of optimal enzyme mixtures depended clearly on the substrate and on the enzyme system studied. The optimal enzyme mixture of thermostable enzymes was dominated by Cel7A and required a relatively high amount of xylanase, whereas with T. reesei enzymes, the high proportion of Cel7B appeared to provide the required xylanase activity. The main effect of the pretreatment method was that the required proportion of xylanase was higher and the proportion of Cel7A lower in the optimized mixture for hydrolysis of alkaline oxidised bagasse than steam-exploded bagasse. In prolonged hydrolyses, less Cel7A was generally required in the optimal mixture. Five-component mixtures of thermostable enzymes showed comparable hydrolysis yields to those of commercial enzyme mixtures.     

FiD: a software for ab initio structural identification of product ions from tandem mass spectrometric data

We present FiD (Fragment iDentificator), a software tool for the structural identification of product ions produced with tandem mass spectrometric measurement of low molecular weight organic compounds. Tandem mass spectrometry (MS/MS) has proven to be an indispensable tool in modern, cell-wide metabolomics and fluxomics studies. In such studies, the structural information of the MS(n) product ions is usually needed in the downstream analysis of the measurement data. The manual identification of the structures of MS(n) product ions is, however, a nontrivial task requiring expertise, and calls for computer assistance. Commercial software tools, such as Mass Frontier and ACD/MS Fragmenter, rely on fragmentation rule databases for the identification of MS(n) product ions. FiD, on the other hand, conducts a combinatorial search over all possible fragmentation paths and outputs a ranked list of alternative structures. This gives the user an advantage in situations where the MS/MS data of compounds with less well-known fragmentation mechanisms are processed. FiD software implements two fragmentation models, the single-step model that ignores intermediate fragmentation states and the multi-step model, which allows for complex fragmentation pathways. The software works for MS/MS data produced both in positive- and negative-ion modes. The software has an easy-to-use graphical interface with built-in visualization capabilities for structures of product ions and fragmentation pathways. In our experiments involving amino acids and sugar-phosphates, often found, e.g., in the central carbon metabolism of yeasts, FiD software correctly predicted the structures of product ions on average in 85% of the cases. The FiD software is free for academic use and is available for download from www.cs.helsinki.fi/group/sysfys/software/fragid. Copyright (c) 2008 John Wiley & Sons, Ltd.     

Thermoascus aurantiacus CBHI/Cel7A production in Trichoderma reesei on alternative carbon sources

To develop functional enzymes in cellulose hydrolysis at or above 70 degrees C the cellobiohydrolase (CBHI/Cel7A) of Thermoascus aurantiacus was cloned and expressed in Trichoderma reesei Rut-C30 under the strong cbh1 promoter. Cellulase production of the parental strain and the novel strain (RF6026) was examined in submerged fermentation experiments using various carbon sources, which were lactose, Solka Floc 200 cellulose powder, and steam pretreated corn stover. An industrially feasible production medium was used containing only distiller's spent grain, KH(2)PO(4), and (NH(4))(2)SO(4). Enzyme production was followed by measurements of protein concentration, total cellulase enzyme activity (filter paper activity), beta-glucosidase activity, CBHI activity, and endogenase I (EGI) activity. The Thermoascus CBHI/Cel7A activity was taken as an indication of the heterologous gene expression under the cbh1 promoter.