Two 1-substituted 4-nitro­imidazoles

Crystalline 4-nitro-1-phenyl­imidazole, C₉H₇N₃O₂, (I), and 4′-­nitro-1-phenyl-4,1′-bii­imidazole, C₁₂H₉N₅O₂, (II), contain C—H⃛O and C—H⃛N hydrogen bonds, connecting the mol­ecules into infinite chains. The aromatic fragments in both compounds are nearly planar. The dihedral angles between the benzene and imidazole rings are 26.78 (5)° in (I) and 29.36 (8)° in (II).     

Determination of trace amounts of cobalt in water by solid-phase spectrophotometry after preconcentration on a nitroso R salt chelating resin

A sensitive method for the determination of microamounts of cobalt by ion-exchanger spectrophotometry has been developed. The chromogenic agent, Nitroso-R-Salt (NRS), was loaded on an anionic-exchange resin (Amberlite CG-400). The absorbance of the NRS-cobalt complex on the chelating resin was measured at 508 nm. The best conditions for the preconcentration of cobalt on the resin before the spectrophotometric determination were a pH value of 6, temperature of 80 °C, and heating times of 45 or 90 min for 50 and 400 ml of sample, respectively. The detection limits were 27 ng/ml (50-ml samples) and 1.8 ng/ml (400-ml samples). Interference by other metals was investigated. The method is useful for determination of cobalt in natural waters.     

Nanotubes Made from Deeply Undercooled Cryolite/Alumina Melts

The rapid‐solidification processing (by a cooling rate of 10⁵–10⁶ K/s) was used for the preparation of deeply undercooled cryolite/alumina (Na₃AlF₆/Al₂O₃) melts. We found a mass of nanotubes on the surface of these undercooled melts. The nanotubes were preferentially located on the defect places of the surface with the following approximate dimensions: base≈100×100 nm, length≈1000 nm. The solidified samples with the nanotubes on the surface were analyzed by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), and infrared spectroscopy (IR).     

New Schiff base complexes of ruthenium(III) and their use as catalysts for O-allyl systems isomerization

Seven new ruthenium(III) complexes of the general formula [RuCl(PPh₃)LL′] · xH₂O (LL′ = [ONNO] = symmetrical and unsymmetrical Schiff base derivatives of trans-1,2-diaminocyclohexane and 2-hydroxynaphthaldehyde as well as R-salicylaldehydes, x = 0–3) have been synthesized. The complexes were characterized by physico-chemical and spectroscopic techniques. The catalytic activities of the complexes in the isomerization reaction of selected O-allyl systems, i.e., 1,4-diallyloxybutane and 4-allyloxybutan-1-ol have been studied. Some of the complexes showed high efficiency and E-stereoselectivity in double bond migration of allyl group to 1-propenyl group and high selectivity of isomerization of allyloxyalcohol to cyclic acetal.     

Crystalline structure of sequential poly(ester amide)s derived from glycolic acid, 1,6‐hexanediamine,and even aliphatic dicarboxylic acids

Basic structural data of two sequential poly(ester amide)s derived from glycolic acid, 1,6‐hexanediamine, and adipic acid or dodecanodioic acid have been determined by means of X‐ray and electron diffraction patterns from fibers and single crystals. Chain‐folded lamellar crystals were obtained by isothermal crystallization from diol or glycerine solutions, and the crystalline habit was investigated by real space electron microscopy. Polyethylene decoration techniques were applied to evaluate the regularity of the folding surfaces. Spherulites prepared from evaporation of formic acid solutions were also studied. The two sequential poly(ester amide)s crystallized according to triclinic and monoclinic unit cells, in which the a crystallographic parameter was close to the typical distance between hydrogen‐bonded chains. Projections viewed down the chain axis revealed differences in the packing mode since oblique and rectangular cells were found for the adipic acid and dodecanodioic acid derivatives, respectively. Both structures can be envisaged as a stacking of hydrogen‐bonded sheets although clear differences concerning the shift between consecutive sheets and the number of layers comprising the unit cell were found. The large unit cells that have been deduced seem to be a consequence of the different packing preferences of the diester and diamide moieties. Both polymers have a molecular conformation that deviates from the all‐trans conformation typical of aliphatic polyamides and polyesters with a large number of methylene groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 194–206, 2009     

Sorting out the value of spectroscopic tools to assess the Colletotrichum acutatum impact in olive cultivars with different susceptibilities

The olive tree (Olea europaea L.) can be affected by Colletotrichum acutatum, causing a loss of yield and quality of the final products, whilst the incidence of this fungal infection depends on several factors, including cultivar susceptibility. Thus, the effect of C. acutatum infection in cultivars displaying different susceptibilities to this fungal disease (‘Galega Vulgar’ ‐ susceptible, ‘Cobrançosa’ ‐ moderately susceptible, ‘Picual’ ‐ tolerant) has been assessed through spectrophotometric methods and HPLC, while the FTIR spectra of the cuticles have been concomitantly registered, resorting to the ATR accessory. With the support of multivariate analysis, these spectra allowed to discriminate olives with distinct infection times, besides retrieving evidences concerning the different susceptibility of each cultivar, while these observations were reinforced by the spectrophotometric and chromatographic methods. Furthermore, the assessment of the phenolic profile evidenced individual compounds in the distinct cultivars, so as their variations in response to the fungal infection.     

Novel Bisphosphonates Derived from 1H‐Indazole, 1H‐Pyrazolo[3,4‐b]Pyridine,and 1H‐Pyrazolo[3,4‐b]Quinoline

Novel tetraethyl ethylene‐1,1‐bisphosphonate esters derived from 1H‐indazole, 1H‐pyrazolo[3,4‐b]pyridine, and 1H‐pyrazolo[3,4‐b]quinoline were synthesized by a Michael addition reaction of tetraethyl ethylidene‐1,1‐bisphosphonate with the corresponding heterocycle, using conventional heating and microwave‐assisted methods. The microwave‐assisted method provides shorter reaction times and better yields. The hydrolysis of bisphosphonates afforded the corresponding bisphosphonic acids or salt, using concentrated hydrochloric acid or TMSBr/collidine, respectively. All new compounds were fully characterized, and their structures were assigned using ¹H, ³¹P, and ¹³C NMR and IR spectroscopies and mass spectrometry. The molecular structure of compound 6 was confirmed by X‐ray diffraction studies.     

Insights into reaction mechanisms in heterogeneous catalysis revealed by in situ NMR spectroscopy

This tutorial review intends to show the possibilities of in situ solid state NMR spectroscopy in the elucidation of reaction mechanisms and the nature of the active sites in heterogeneous catalysis. After a brief overview of the more usual experimental devices used for in situ solid state NMR spectroscopy measurements, some examples of applications taken from the recent literature will be presented. It will be shown that in situ NMR spectroscopy allows: (i) the identification of stable intermediates and transient species using indirect methods, (ii) to prove shape selectivity in zeolites, (iii) the study of reaction kinetics, and (iv) the determination of the nature and the role played by the active sites in a catalytic reaction. The approaches and methodology used to get this information will be illustrated here summarizing the most relevant contributions on the investigation of the mechanisms of a series of reactions of industrial interest: aromatization of alkanes on bifunctional catalysts, carbonylation reaction of methanol with carbon monoxide, ethylbenzene disproportionation, and the Beckmann rearrangement reaction. Special attention is paid to the research carried out on the role played by carbenium ions and alkoxy as intermediate species in the transformation of hydrocarbon molecules on solid acid catalysts.     

Effects of ozone in surface modification and thermal stability of SEBS block copolymers

SEBS block copolymers were treated under mild conditions in an ozone atmosphere, producing very slightly chemically-modified surfaces. The thermal stability was analysed by chemiluminescence and related to morphological changes observed by AFM. The intrinsic thermal stability was diminished by ozone exposure, but the oxidation induction times were delayed which indicates an enhancement of thermal stability under oxidative conditions. Also, chemiluminescence analysis showed the presence of a typical order-disorder transition at temperatures around 120 °C. Two different sets of samples which showed different morphological patterns were imaged by AFM. The effects of micro-domain separation and inter-domain structure on thermal properties are discussed and explained by a coarsening of the internal interface induced by ozone. A detailed 2D Fourier transformed analysis of AFM images allowed us to identify a regular wrinkled nano-pattern induced by uniaxial strain combined with ozone treatment, offering new opportunities in applications ranging from organic electronics to bio-patterning.