Modification of the surface state of rough substrates by two different varnishes and influence on the reflected light

Modification of the visual appearance when a rough surface is covered by a varnish is mostly attributed to the levelling of the substrate surface, which depends on the molecular weight of the varnish. The topography of varnished surfaces, however, has never been measured directly. Surfaces of varnishes applied over glass substrates of varying roughness were studied, therefore, using mechanical profilometry. Two different varnishes made with a low and a high molecular weight resin were studied. Both varnishes lower the r.m.s. roughness of the substrates and filter the high spatial frequencies. These results are amplified for the varnish containing the low molecular weight resin. The light reflected by the varnished samples is modelled from these topographical data. Its angular distribution, calculated from the probability density of slopes is presented, taking into account separately the air/varnish and the varnish/substrate interfaces. These analyses are presented in a back-scattering configuration. They show that varnishing significantly reduces the angular width of the reflected light and that this effect is magnified for the low molecular weight resin. Modelling furthermore shows that the influence of the roughness of the varnish/substrate interface is negligible in the total reflected light.     

3D-TOFSIMS characterization of black spots in polymer light emitting diodes

The occurrence and formation of black spots areas in PolyLED devices has been studied by time-of-flight SIMS (TOFSIMS). The composition, shape and position of the black spots is visualised by three-dimensional (3D)-TOFSIMS depth-profiling. It has been established that the formation of non-emissive spots is due to the growth of aluminium oxide clusters at the AlBa/polymer interface. Electron injection in the black spots is lost by the resulting local increase of the resistivity of the cathode.     

2-fold and 3-fold mixing: why 3-dot-type counterexamples are impossible in one dimension

V.A. Rohlin asked in 1949 whether 2-fold mixing implies 3-fold mixing for a stationary process (ξ_i )_i2ℤ, and the question remains open today. In 1978, F. Ledrappier exhibited a counterexample to the 2-fold mixing implies 3-fold mixing problem, the socalled 3-dot system, but in the context of stationary random fields indexed by ℤ². In this work, we first present an attempt to adapt Ledrappier's construction to the onedimensional case, which finally leads to a stationary process which is 2-fold but not 3-fold mixing conditionally to the σ-algebra generated by some factor process. Then, using arguments coming from the theory of joinings, we will give some strong obstacles proving that Ledrappier's counterexample can not be fully adapted to one-dimensional stationary processes.     

The Henderson Approximation and the Mass Action Law of Guldberg and Waage

Using contemporary accounts, we describe the scope of the Henderson approximation, and its relationship to the mass action law of Guldberg & Waage. The Henderson approximation, apparently written in logarithmic form by Hasselbalch, has the same form as the mass action law, but has a completely different meaning and a much more restricted range of applicability. The Guldberg-Waage law is the fundamental mass action relationship valid for all chemical equilibria, whereas the Henderson approximation is useful only within a limited range of a sufficiently concentrated two-component buffer mixture.     

Acoustic Analysis of Pathological Voices Compressedwith MPEG System

The MPEG-1 Layer 3 compression schema of audio signal, commonly known as mp3, has caused a great impact in recent years as it has reached high compression rates while conserving a high sound quality. Music and speech samples compressed at high bitrates are perceptually indistinguishable from the original samples, but very little was known about how compression acoustically affects the voice signal. A previous work with normal voices showed a high fidelity at high-bitrate compressions both in voice parameters and the amplitude-frequency spectrum. In the present work, dysphonic voices were tested through two studies. In the first study, spectrograms, long-term average spectra (LTAS), and fast Fourier transform (FFT) spectra of compressed and original samples of running speech were compared. In the second study, intensities, formant frequencies, formant bandwidths, and a multidimensional set of voice parameters were tested in a set of sustained phonations. Results showed that compression at high bitrates (96 and 128 kbps) preserved the relevant acoustic properties of the pathological voices. With compressions at lower bitrates, fidelity decreases, introducing some important alterations. Results from both works, Gonzalez and Cervera and this paper, open up the possibility of using MPEG-compression at high bitrates to store or transmit high-quality speech recordings, without altering their acoustic properties.     

Rietveld refinement of CdSe phases annealed under argon atmosphere

Hexagonal and cubic cadmium selenide were prepared from a chemical route by using cadmium chloride and potassium selenium hydride obtained from reaction of selenium powder and potassium boron hydride. The product obtained was thermally treated under argon flux at 300, 500 and 600 °C for 2 h and characterized by X-ray photoelectron spectroscopy and X-ray diffraction. The X-ray diffraction data were refined by Rietveld method and the structural parameters were determined for the phases of each annealed samples. At 300 °C five phases were identified: Cubic and hexagonal cadmium selenides and the contaminants: Potassium chloride, boron oxide and cadmium boron oxide. At 500 and 600 °C only the hexagonal cadmium selenide phase was identified besides the other above mentioned contaminant.     

Regularization of Discrete Ill-Posed Problems

The paper concerns conditioning aspects of finite-dimensional problems arising when the Tikhonov regularization is applied to discrete ill-posed problems. A relation between the regularization parameter and the sensitivity of the regularized solution is investigated. The main conclusion is that the condition number can be decreased only to the square root of that for the nonregularized problem. The convergence of solutions of regularized discrete problems to the exact generalized solution is analyzed just in the case when the regularization corresponds to the minimal condition number. The convergence theorem is proved under the assumption of the suitable relation between the discretization level and the data error. As an example the method of truncated singular value decomposition with regularization is considered. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structure and electrochemical behaviour of 4,7-diazaheptyl-trimethoxy-silane and vinyl-trialkoxy-silane adsorbed at silver surface

Novel self-assembled monolayers were obtained on silver using 4,7-diazaheptyl-trimethoxy-silane (SiN) and vinyl-trialkoxy-silane (SiVA, where the alkyl group is 3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57,60-eicozaoxa- hexaheptaconan). It was shown that thus modified metal surface was protected against electrooxidation. A densely packed monolayer remained stable and did not desorb from the Ag electrode on the potential cycling. The structure of SiN and SiVA as well as their complexes with Li⁺ cations were calculated and visualised by the AM1d and PM5 semi-empirical methods.     

Effect of induced shielding current transmission in longitudinal direction on levitation force of melt grown single-domain YBa_2Cu_3O_(7-x) cylindrical superconductor

YBa2Cu3O7-x (YBCO) bulk is one of the most important high temperature superconducting materials for magnetic levitation applications, because it has a high magnetic irreversibility field Hirr at liquid nitrogen temperature, and can grow into large grains. The levitation force of YBCO bulk is proportional to the critical current density (Jc) and grain radius (r)[1], so higher Jc and r are appreciated for YBCO bulks to achieve higher levitation force. Now single-domain YBCO bulks up to s…