Photon gluon fusion cross sections at HERA energy

We present cross sections for heavy flavour production through photon gluon fusion in electron proton collisions at HERA energy. The electron photon vertex is taken into account explicitly, and theQ ² of the exchanged photon ranges from nearly zero (almost real photon) to the kinematically allowed maximum. In our approach the scale is set by the mass of the produced quarks. Our formalism is also applicable to the production of light quarks as long as the invariant mass of the pair is sufficiently high, so we also give cross sections for \(u\bar u,d\bar d\) and \(s\bar s\) production.     

Continuous automatic determination of ammonia by using an integrated separation/detection unit

An automatic continuous-flow photometric method for the determination of ammonia is proposed. It is based on the Berthelot reaction, the product of which is temporarily immobilized on a suitable support (Sephadex QAE) located in the flow-cell. The retained product is eluted after measurement by a cationic surfactant contained in the carrier solution. The method allows the determination of the analyte between 0.4 and 20.0 gmg/ml, with an RSD of 0.8%, at a sampling frequency of 13/hr. The determination limit can be reduced by a factor of ten by using a flow-cell with a two-fold longer path length, but the sampling frequency is also reduced as a result. The method was applied to the determination of this analyte in agricultural samples (plants and soils) and compared with standard methods for these types of samples.     

Peptide labeling using 188Re, 188Re-MAG3 and 153Sm-H1ETA: A comparison on their in vitro lipophilicity

Lanreotide peptide was labeled with ¹⁵³Sm-H₁ETA and ¹⁸⁸Re-MAG₃ in order to evaluate whether or not their conjugation to the peptide produce significant differences of the in vitro lipophilicity with respect to the ¹⁸⁸Re-lanreotide prepared by the direct labeling method (highly lipophilic). The differences of lipophilicity between the complexes, were evaluated using a reverse phase HPLC system. The measured lipophilicity of ¹⁵³Sm-H₁ETA-lanreotide, ¹⁸⁸Re-MAG₃-lanreotide and ¹⁸⁸Re-lanreotide was taken to be the capacity factor [k" = (t _R-t ₀)/t ₀ where t _R is the retention time and t ₀ is the dead time] for each of the complexes under identical chromatography conditions. Results showed that the in vitro lipophilicity decreased in the order ¹⁸⁸Re-lanreotide (direct labeling), ¹⁸⁸Re-MAG₃-lanreotide and ¹⁵³Sm-H₁ETA-lanreotide. Since the last one has a capacity factor (k") similar to that of ¹⁸⁸Re-MAG₃, some renal elimination for ¹⁵³Sm-H₁ETA-lanreotide could be expected, which probably would reduce the unnecessary radiation dose to normal tissues.     

Preparation and electrochemical behavior of ordered rh adlayers on Pt(100) electrodes

Rhodium adlayers on Pt(100) substrates have been prepared by electrodeposition from dilute Rh(III) acidic solutions. The initially disordered layer is electrochemically annealed by applying a polarization program consisting of high-sweep-rate multicycle sequences between 0.05 and 0.78 V(RHE) in 0.1 M H(2)SO(4). In this way, a pseudomorphic Rh monolayer can be prepared on Pt(100) substrates. The degree of order of the electrochemically annealed layer has been evidenced not only through voltammetric experiments but also by means of scanning tunneling microscopy with atomic resolution for iodine-protected adlayers, which show a c(2 x 2) structure. The electrochemically induced ordering of the Rh adlayer appears to be a consequence of the repeated cycles of adsorption/desorption of H and, especially, oxygenated species. Voltammetry in sulfuric acid solutions permits examination of the energetics of H/anions and OH/O adsorption as a function of the Rh coverage. The first monolayer adsorbs both hydrogen and oxygenated species more strongly than the second one. This can be explained through an electronic effect caused by the underlying Pt(100) substrate.     

Mechanical analysis on rocket propellants

The mechanical properties of solid rocket propellants are very important for good functioning of rocket motors. During use and storage the mechanical properties of rocket propellants are changing, due to chemical and mechanical influences such as thermal reactions, oxidation reactions or vibrations. These influences can result in malfunctioning, leading to an unwanted explosion of the rocket motor. Most of modern rocket propellants consist of a polymer matrix (i.e. HTPB) filled with a crystalline material (i.e. AP, AN). However, the more conventional double base propellants consist of a solid gel matrix with additives, such as stabilizers. Both materials show a mechanical behaviour, quite similar to that of general polymers. To describe the material behaviour of both propellants a linear visco-elastic theory is often used to describe the mechanical behaviour for small deformations. Because the time-temperature dependency is also valid for these materials a mastercurve can be constituted. With this mastercurve the response properties (stiffness) under extreme conditions can be determined. At TNO-PML a mastercurve of a double base propellant was constituted using dynamical mechanical analysis (DMA) and compared with a mastercurve reduced from conventional (static) stress relaxation tests. The mechanical properties of this double base propellant determined by DMA were compared with conventional (quasi-static) tensile test results. This revised version was published online in July 2006 with corrections to the Cover Date.     

中药川白芷化学成分的研究

中药川白芷为伞形科当归属杭白芷 (Ａｎｇｅｌｉｃａｄａｈｕｒｉｃａ (Ｆｉｓｃｈ .ｅｘＨｏｆｆｍ .)Ｂｅｎｔｈ .ｅｔＨｏｏｋ .ｃｖｈａｎｇ ｂａｉｚｈｉＨｏｒｔ)的干燥根。川白芷为我国传统中药 ,主治头疼、鼻炎、癣症等疾病。现代药理实验表明白芷中所含的呋南香豆素具有平喘、降压、抗菌、解痉、光敏、活化交感系激素等多种药理作用[1] 。已有文献对白芷的化学成分进行了研究 ,发现白芷中主要含香豆素成分[2～ 4] 。四川遂宁产川白芷为道地白芷 ,其药性好 ,为进一步研究其活性成分 ,本文对遂宁产川白芷进行化学成分研究。共分离、…