Optimized conditions for hydrocarbon group type analysis of base oils by thin-layer chromatography-flame ionisation detection

The results of research on the optimization of the thin-layer chromatography-flame ionisation detection for the determination of group composition of natural base oils, including separation of the aromatics into subgroups, are presented. Neutral base oils obtained in several steps of refining from vacuum distillation petroleum fractions are the most difficult to analyze by hydrocarbon group type analysis (HGTA) because of the high content of aliphatic fragments in their molecules. Factors affecting the accuracy and precision of the results were identified. The paper presents the analytical procedure, including two different calibration methods, as well as the results of studies on the reproducibility of HGTA of typical base oils of different viscosity classes under the optimized conditions. The same conditions were found suitable for HGTA of other high-boiling petroleum fractions by TLC with flame ionisation detection. The paper also introduces a new procedure for reproducible determination of polar fractions in base oils utilizing solid-phase extraction columns, and presents a corrected procedure for the determination of saturated compounds and aromatics (mono-, bi- and polycyclic) in base oils by column liquid chromatography.     

Kinetics and mechanism of the first aquation stage for the [Cr(pic)3]0 and [Cr(pic)2(OH)]2 0 complexes in HClO4 solutions

Aquation of [Cr(pic)₃]⁰ and [Cr(pic)₂(OH)]₂ ⁰ in aqueous HClO₄ solutions leads to formation of the common product – [Cr(pic)₂(H₂O)₂]⁺. The first, reversible stage, the ring opening via Cr—N bond breaking in [Cr(pic)₃]⁰ is followed by the second, rate-determining step – one-end bonded pic ligand liberation. In the case of the [Cr(pic)₂(OH)]₂ ⁰ complex, the first faster stage produces the singly bridged dimer, which undergoes cleavage into the parent monomers in the second, much slower step. The subsequent aquation of [Cr(pic)₂(H₂O)₂]⁺ is extremely slow and leads to [Cr(pic)(H₂O)₄]²⁺ formation, which practically does not undergo further ligand substitution under the conditions applied. Kinetics of the first aquation stage for [Cr(pic)₃]⁰ and of the second step for [Cr(pic)₂(OH)]₂ ⁰ were studied spectrophotometrically in the 0.1–1.0 M HClO₄ range at I = 1.0 M. The observed pseudo-first order rate constant for [Cr(pic)₃]⁰ decreases with [H⁺] increase according to the rate law: k _obs = k ₁ + k _–1 Q ₁/[H⁺], where k ₁ and k _–1 are the rate constants of the forward and the reverse processes in the unprotonated substrate and Q ₁ is the protonation constant of the pyridine nitrogen atom. In the case of the [Cr(pic)₂(OH)]₂ ⁰ complex, the rate for the singly bridged dimer cleavage does not depend on [H⁺]. The activation parameters for the chelate-ring opening in [Cr(pic)₃]⁰ and for the singly bridged dimer cleavage have been determined and discussed. Some kinetic data of the slow, second aquation stage for the [Cr(pic)₃]⁰ complex and of the fast, first aquation stage for the doubly bridged dimer have been studied; for both reactions the rate increases linearly with the increase in [H⁺].     

Radiative lifetimes of the Rb(n 2 F)(n=6, 7, 8) states measured with the stepwise dipole-quadrupole excitation scheme

We report measurements of lifetimes of the Rb(n ² F)(n=6, 7, 8) states performed in a vapour cell. TheF-states were excited in a two-step sequence of an electric-dipole transition followed by an electric-quadrupole transition. Single photon counting was used for detection. The results are: (6² F)=171(4), (7² F)=262(15), (8² F)=387(12) (in ns). These lifetimes, have been compared with theoretical values given by different authors. An estimate of the cross sections for quenching due to collisions with ground-state Rb atoms is also given.This work was supported by the Polish Committee for Scientific Research under grant No. 2 2341 92 03     

Radon-222 and 226Ra concentrations in mineralized groundwaters of Gorzanów (Kłodzko Basin, Sudeten Mountains, SW Poland)

This work characterizes the occurrence of radionuclides ²²²Rn and ²²⁶Ra in the mineralized groundwaters of Gorzanów. The village is situated in the Sudeten Mountains, which are known in Poland for having increased concentrations of the aforesaid radionuclides in their groundwaters. However, in Gorzanów, the measured concentrations of ²²⁶Ra were low both in the reservoir rocks and mineralized waters. Consequently, the ²²²Rn concentration in the groundwaters also turned out to be low. The ²²⁶Ra content of these waters should mainly be associated with the dissolution of this nuclide, together with other main ions, at large depths, at slightly enhanced temperature. Radon-222, on the other hand, penetrates into the water during its outflow to the surface, in the zones of intensive friable deformations near fault zones. Thus, in the groundwaters of Gorzanów, the concentrations of these nuclides, subsequent in the uranium series, do not have a common genesis and they are not correlated with each other.     

Austausch von Chlorisotopen am Phosphoratom, 1. Mitt.: Dialkylchlorthiophosphate

Zusammenfassung An den Modellverbindungen Dialkylchlorthiophosphat (RO)₂P(S)Cl (R=Me, Et, n-Pr) und Diphenylchlorthiophosphat (PhO)₂P(S)Cl wurde der Austausch Chlorid—Radiochlorid am Thiophosphorylzentrum untersucht. Die bimolekularen Geschwindigkeitskonstanten, die Aktivierungsenergien und Aktivierungsentropien wurden berechnet. Der Einfluß von Substituenten auf bimolekulare Substitutionsreaktionen am vierfach koordinierten Phosphoratom wurde diskutiert.

---

Chlorine isotopic exchange at phosphorus atoms, I.: Chloridothiophosphates

The chloride—radiochloride ion exchange at the thiophosphoryl centre has been studied using dialkylchloridothiophosphates (RO)₂P(S)Cl (R=Me, Et, n-Pr) and diphenylphosphorochloridothionate, (PhO)₂P(S)Cl, as model compounds. The bimolecular rate constants, energies and entropies of activation have been calculated. Effects of the substituents in the bimolecular displacement reaction on four-coordinated phosphorus atom have been discussed.

---

---

Mit 3 Abbildungen     

Properties of a Ring Critical Pointas Measures of Intramolecular H-Bond Strength

Summary.  The topological parameters derived from the Bader theory such as the electron density and its Laplacian at the ring critical point (RCP) are analysed here as possible measures of the H-bond stength for intramolecular H-bonds. The parameters of RCP correlate well with the other properties of intramolecular H-bonds which are known as good measures of the H-bond strength. The calculations were performed on two samples of compounds with intramolecular H-bonds: the derivatives of malonaldehyde and the derivatives of o-hydroxybenzaldehyde. MP2 and HF calculations were carried out using a 6-311++G^** basis set. E-mail: slagra@krysia.uni.lodz.pl Received February 18, 2002; accepted (revised) May 27, 2002     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.     

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.     

Catalytic activity of silica in ozone formation in electrical discharges

The catalytic action of granular silica packing on ozone formation has been observed under discharge conditions. Using a glass ozonizer with a metal high-voltage electrode, at a frequency of 400 Hz it was possible to obtain much higher ozone concentrations in the presence q( silica than without packing, with the same total energy consumption. The dependence between ozone production and energy efficiency is considered, and conditions of the optimum ozonizer run are discussed. It is shown that in the all-glass ozonizer with a narrow discharge gap, the ozone concentration may be as high as 6.5% (ca. 130g O₃/m³) when silica packing is applied.     

Kinetics of thermal decomposition of Co3O4 powder and single crystals

Kinetics of thermal decomposition in vacuum of Co₃O₄ powder as well as single crystals has been investigated. Discrepancies with the results of previous authors have been discussed. Decomposition of Co₃O₄ proceeds through formation of a compact layer of CoO and hence diffusion is the rate-limiting factor. The experimental curves α(t) be described for 0.05 < α < 0.85 using a modified Ginstling-Brounshtein equation: 1 ? 2α/3 ? (1 ? α)^2/3 = ktⁿ where the activation energy varies with the degree of decomposition.