A comparison of T2*-weighted magnitude and phase imaging for measuring the arterial input function in the rat aorta following intravenous injection of gadolinium contrast agent

The arterial input function (AIF) is important for quantitative MR imaging perfusion experiments employing Gd contrast agents. This study compared the accuracy of T(2)*-weighted magnitude and phase imaging for noninvasive measurement of the AIF in the rat aorta. Twenty-eight in vivo experiments were performed involving simultaneous arterial blood sampling and MR imaging following Gd injection. In vitro experiments were also performed to confirm the in vivo results. At 1.89 T and TE=3 ms, the relationship between changes in 1/T(2)* in blood (estimated from MR signal magnitude) and Gd concentration ([Gd]) was measured to be approximately 19 s(-1) mM(-1), while that between phase and [Gd] was approximately 0.19 rad mM(-1). Both of these values are consistent with previously published results. The in vivo phase data had approximately half as much scatter with respect to [Gd] than the in vivo magnitude data (r(2)=.34 vs. r(2)=.17, respectively). This is likely due to the fact that the estimated change in 1/T(2)* is more sensitive than the phase to a variety of factors such as partial volume effects and T(1) weighting. Therefore, this study indicates that phase imaging may be a preferred method for measuring the AIF in the rat aorta compared to T(2)*-weighted magnitude imaging.     

Nonmonotone travelling waves in a single species reaction-diffusion equation with delay

We prove the existence of a continuous family of positive and generally nonmonotone travelling fronts for delayed reaction-diffusion equations , when g∈C²(R₊,R₊) has exactly two fixed points: x₁=0 and x₂=K>0. Recently, nonmonotonic waves were observed in numerical simulations by various authors. Here, for a wide range of parameters, we explain why such waves appear naturally as the delay h increases. For the case of g with negative Schwarzian, our conditions are rather optimal; we observe that the well known Mackey-Glass-type equations with diffusion fall within this subclass of (∗). As an example, we consider the diffusive Nicholson's blowflies equation.     

Aggregating preferences rankings with variable weights

One of the most important issues for aggregating preferences rankings is the determination of the weights associated with the different ranking places. To avoid the subjectivity in determining the weights, Cook and Kress (1990) [5] suggested evaluating each candidate with the most favorable scoring vector for him/her. With this purpose, various models based on Data Envelopment Analysis have appeared in the literature. Although these methods do not require predetermine the weights subjectively, some of them have a serious drawback: the relative order between two candidates may be altered when the number of first, second, …, kth ranks obtained by other candidates changes, although there is not any variation in the number of first, second, …, kth ranks obtained by both candidates. In this paper we propose a model that allows each candidate to be evaluated with the most favorable weighting vector for him/her and avoids the previous drawback. Moreover, in some cases, we give a closed expression for the score assigned with our model to each candidate.     

An intelligent decomposition of pairwise comparison matrices for large-scale decisions

A Pairwise Comparison Matrix (PCM) has been used to compute for relative priorities of elements and are integral components in widely applied decision making tools: the Analytic Hierarchy Process (AHP) and its generalized form, the Analytic Network Process (ANP). However, PCMs suffer from several issues limiting their applications to large-scale decision problems. These limitations can be attributed to the curse of dimensionality, that is, a large number of pairwise comparisons need to be elicited from a decision maker. This issue results to inconsistent preferences due to the limited cognitive powers of decision makers. To address these limitations, this research proposes a PCM decomposition methodology that reduces the elicited pairwise comparisons. A binary integer program is proposed to intelligently decompose a PCM into several smaller subsets using interdependence scores among elements. Since the subsets are disjoint, the most independent pivot element is identified to connect all subsets to derive the global weights of the elements from the original PCM. As a result, the number of pairwise comparison is reduced and consistency is of the comparisons is improved. The proposed decomposition methodology is applied to both AHP and ANP to demonstrate its advantages.     

Nitrogen modified carbide-derived carbons as adsorbents of hydrogen sulfide

Carbide-derived carbons produced from titanium carbide at temperatures from 600 degrees C to 1000 degrees C and exhibiting different porosities were treated with urea in order to introduce nitrogen containing species to their surface. Adsorption of hydrogen sulfide in the dynamic conditions in the presence of moisture was studied on initial and modified samples. The samples, before and after exposure to hydrogen sulfide, were characterized using adsorption of nitrogen, potentiometric titration, elemental analysis, and thermal analysis. The results showed that the introduction of nitrogen significantly enhances the performance of carbons in the process of hydrogen sulfide removal. The amount adsorbed and the degree of oxidation depended on the porosity. On the samples with very small pores, the adsorption was limited, probably owing to the sterical hindrances. With an increase in the size and volume of micropores, in which water and hydrogen sulfide can be accommodated, the efficiency of H(2)S removal by CDC increased.     

Chemical Characterization and Bioactivity of Commercial Essential Oils and Hydrolates Obtained from Portuguese Forest Logging and Thinning

Essential oils (EOs) and hydrolates (Hds) are natural sources of biologically active ingredients with broad applications in the cosmetic industry. In this study, nationally produced (mainland Portugal and Azores archipelago) EOs (11) and Hds (7) obtained from forest logging and thinning of Eucalyptus globulus, Pinus pinaster, Pinus pinea and Cryptomeria japonica, were chemically evaluated, and their bioactivity and sensorial properties were assessed. EOs and Hd volatiles (HdVs) were analyzed by GC-FID and GC-MS. 1,8-Cineole was dominant in E. globulus EOs and HdVs, and α- and β-pinene in P. pinaster EOs. Limonene and α-pinene led in P. pinea and C. japonica EOs, respectively. P. pinaster and C. japonica HVs were dominated by α-terpineol and terpinen-4-ol, respectively. The antioxidant activity was determined by DPPH, ORAC and ROS. C. japonica EO showed the highest antioxidant activity, whereas one of the E. globulus EOs showed the lowest. Antimicrobial activity results revealed different levels of efficacy for Eucalyptus and Pinus EOs while C. japonica EO showed no antimicrobial activity against the selected strains. The perception and applicability of emulsions with 0.5% of EOs were evaluated through an in vivo sensory study. C. japonica emulsion, which has a fresh and earthy odour, was chosen as the most pleasant fragrance (60%), followed by P. pinea emulsion (53%). In summary, some of the studied EOs and Hds showed antioxidant and antimicrobial activities and they are possible candidates to address the consumers demand for more sustainable and responsibly sourced ingredients.     

Theoretical and electrochemical studies on organometallic symmetrical schiff base complexes of Zn(II), Cu(II), Ni(II) and Co(II)

The electronic communication between two redox centres through a Schiff base complex has been investigated in a series of ethylenediimine-bis(1-ferrocenyl-1,3-butanedionate) complexes of Zn(II) 1, Cu(II) 2, Ni(II) 3 and Co(II) 4. Cyclic voltammetry experiments of 1 and 2 exhibit a unique two-electron reversible oxidation wave, whereas in the case of 3 and 4 two and three one-electron oxidation processes are, respectively, observed. These results suggest some electronic interaction between the iron atoms of the ferrocenyl groups. DFT calculations carried out on model complexes show that for all the studied compounds the removal of the first two electrons corresponds to the oxidation processes of the iron centres in the weakly coupled ferrocenyl termini. The electronic communication between the two iron centres increases on going from 1 to 4. Finally, a re-indexation of the bands observed in the UV-Visible spectra has been carried out using TDDFT calculations.     

Unusual photochemical C-N bond cleavage in the novel methyl 2-chloro-3-methyl-2H-azirine-2-carboxylate

The structure, preferred conformers, vibrational spectrum, and photochemical behavior of the novel azirine, methyl 2-chloro-3-methyl-2H-azirine-2-carboxylate (MCMAC) were investigated in low-temperature matrixes and in the neat solid amorphous state by infrared spectroscopy and quantum-chemical calculations. Two conformers of the compound were observed in argon, krypton, and xenon matrixes, in agreement with the DFT(B3LYP)/6-311++G(d,p) and MP2/6-311++G(d,p) theoretical calculations. Both conformers were found to exhibit the carboxylic ester group in the cis conformation, differing in the arrangement defined by the O=C-C-Cl dihedral angle (cis and trans, for Ct and Cc forms, respectively). The Ct conformer was found to be the most stable conformer in the gaseous phase as well as in both argon and krypton matrixes, whereas the more polar Cc conformer became the most stable form in the xenon matrix and in the neat solid amorphous phase. In situ broadband UV (lambda > 235 nm) excitation of matrix-isolated MCMAC led to azirine ring C-C and C-N bond cleavages, the latter process corresponding to the most efficient reaction channel. The photochemical cleavage of the C-N bond had never been previously observed in the case of aliphatic 2H-azirines. Two electron withdrawing substituents (methoxycarbonyl group and chlorine atom) are connected to the azirine ring in the novel MCMAC azirine. The simultaneous presence of these two groups accelerates intersystem crossing toward the triplet state where cleavage of the C-N bond takes place. The primary photoproducts resulting from the C-N and C-C ring-opening reactions were also found to undergo further photochemical decarbonylation or decarboxylation reactions.     

Luminescent Di‐ and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis,Characterization, and Application in OLEDs

New bis‐ and tris(iminopyrrole)‐functionalized linear (1,2‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 2 ), 1,3‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 3 ), 1,4‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 4 ), 4,4′‐(HNC₄H₃‐C(H)?N)₂‐(C₆H₄‐C₆H₄) ( 5 ), 1,5‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 6 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 7 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₄H₈ ( 8 )) and star‐shaped (1,3,5‐(HNC₄H₃‐C(H)?N‐1,4‐C₆H₄)₃‐C₆H₃ ( 9 )) π‐conjugated molecules were synthesized by the condensation reactions of 2‐formylpyrrole ( 1 ) with several aromatic di‐ and triamines. The corresponding linear diboron chelate complexes (Ph₂B[1,3‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 10 ), Ph₂B[1,4‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 11 ), Ph₂B[4,4′‐bis(iminopyrrolyl)‐biphenyl]BPh₂ ( 12 ), Ph₂B[1,5‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 13 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 14 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐anthracenyl]BPh₂ ( 15 )) and the star‐shaped triboron complex ([4′,4′′,4′′′‐tris(iminopyrrolyl)‐1,3,5‐triphenylbenzene](BPh₂)₃ ( 16 )) were obtained in moderate to good yields, by the treatment of 3 – 9 with B(C₆H₅)₃. The ligand precursors are non‐emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π‐conjugation length. The photophysical properties of the luminescent polyboron compounds were measured, showing good solution fluorescence quantum yields ranging from 0.15 to 0.69. DFT and time‐dependent DFT calculations confirmed that molecules 10 and 16 are blue emitters, because only one of the iminopyrrolyl groups becomes planar in the singlet excited state, whereas the second (and third) keeps the same geometry. Compound 13 , in which planarity is not achieved in any of the groups, is poorly emissive. In the other examples ( 11 , 12 , 14 , and 15 ), the LUMO is stabilized, narrowing the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO–LUMO), and the two iminopyrrolyl groups become planar, extending the size of the π‐system, to afford green to yellow emissions. Organic light‐emitting diodes (OLEDs) were fabricated by using the new polyboron complexes and their luminance was found to be in the order of 2400 cd m^?2, for single layer devices, increasing to 4400 cd m^?2 when a hole‐transporting layer is used.     

Insights into reaction mechanisms in heterogeneous catalysis revealed by in situ NMR spectroscopy

This tutorial review intends to show the possibilities of in situ solid state NMR spectroscopy in the elucidation of reaction mechanisms and the nature of the active sites in heterogeneous catalysis. After a brief overview of the more usual experimental devices used for in situ solid state NMR spectroscopy measurements, some examples of applications taken from the recent literature will be presented. It will be shown that in situ NMR spectroscopy allows: (i) the identification of stable intermediates and transient species using indirect methods, (ii) to prove shape selectivity in zeolites, (iii) the study of reaction kinetics, and (iv) the determination of the nature and the role played by the active sites in a catalytic reaction. The approaches and methodology used to get this information will be illustrated here summarizing the most relevant contributions on the investigation of the mechanisms of a series of reactions of industrial interest: aromatization of alkanes on bifunctional catalysts, carbonylation reaction of methanol with carbon monoxide, ethylbenzene disproportionation, and the Beckmann rearrangement reaction. Special attention is paid to the research carried out on the role played by carbenium ions and alkoxy as intermediate species in the transformation of hydrocarbon molecules on solid acid catalysts.