Improvement of thermochromic property at low temperatures of CuMo0.94W0.06O4 by Zn substitution

Zinc-doped copper molybdenum oxide, Zn-doped CuMo_0.94W_0.06O₄, was synthesized, and the effects of the Zn doping on the thermochromic property of CuMo_0.94W_0.06O₄ were investigated at low temperatures. X-ray diffractometry and diffuse reflectance UV–Vis spectroscopy clarified that Zn doping for CuMo_0.94W_0.06O₄ promoted the structural phase transition of the γ-phase to the α-phase of CuMo_0.94W_0.06O₄ at low temperatures and Zn-doped CuMo_0.94W_0.06O₄ exhibited a drastic color change in the temperature range of 30–70 °C. Differential scanning calorimetry also confirmed that Zn doping changed the phase transition temperature of CuMo_0.94W_0.06O₄. Consequently, Cu_1?xZn_xMo_0.94W_0.06O₄ with x?=?0.01 exhibited a larger thermal change in the diffuse reflectance spectrum in the visible light range, compared with CuMo_0.94W_0.06O₄. An appropriate Zn-doping ratio was effective for enhancing the thermochromic property of the CuMo_0.94W_0.06O₄ pigment in the visible region in the temperature range of 30–70 °C.

     

Triflumizole as a Novel Lead Compound for Strigolactone Biosynthesis Inhibitor

Strigolactones (SLs) are carotenoid-derived plant hormones involved in the development of various plants. SLs also stimulate seed germination of the root parasitic plants, Striga spp. and Orobanche spp., which reduce crop yield. Therefore, regulating SL biosynthesis may lessen the damage of root parasitic plants. Biosynthetic inhibitors effectively control biological processes by targeted regulation of biologically active compounds. In addition, biosynthetic inhibitors regulate endogenous levels in developmental stage- and tissue-specific manners. To date, although some chemicals have been found as SL biosynthesis inhibitor, these are derived from only three lead chemicals. In this study, to find a novel lead chemical for SL biosynthesis inhibitor, 27 nitrogen-containing heterocyclic derivatives were screened for inhibition of SL biosynthesis. Triflumizole most effectively reduced the levels of rice SL, 4-deoxyorobanchol (4DO), in root exudates. In addition, triflumizole inhibited endogenous 4DO biosynthesis in rice roots by inhibiting the enzymatic activity of Os900, a rice enzyme that converts the SL intermediate carlactone to 4DO. A Striga germination assay revealed that triflumizole-treated rice displayed a reduced level of germination stimulation for Striga. These results identify triflumizole as a novel lead compound for inhibition of SL biosynthesis.     

Voltammetric study of the transfer of polyammonium ions at nitrobenzene / water interface.

The transfer of polyammonium ions, poly[(dimethylimino)-1,6-hexanediyl] (n = 140, n being the degree of polymerization) ion and poly[(dimethylimino)(2-oxo-1,2-ethanediyl)imino-alpha,omega-alkanediylimino(1-oxo-1,2-ethanediyl)(dimethylimino)-alpha',omega'-alkanediyl] ([-N+ (CH3)2CH2CONH(CH2)x NHCOCH2N+ (CH3)2(CH2)y-]n, x = 2, 3, 4, or 6, y = 3 or 6, and n = 30-130) ions, at a polarizable nitrobenzene / water interface has been studied by normal pulse voltammetry and cyclic voltammetry. Despite the polydispersity of the preparations, by normal pulse voltammetry, an S-shaped current-potential curve with a well-defined limiting current, and, by cyclic voltammetry, a pair of anodic and cathodic peak currents due to the transfer of polyammonium ions across the interface were observed within the potential window. The voltammetric behavior is described. Also, the effect of ion-pair formation of the polyammonium ions with supporting electrolyte anions in nitrobenzene- and water-phases on the half-wave or midpoint potential of the ion-transfer, and the relation between the structure of the polyammonium ions and the transfer potentials are discussed.     

Simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by slurry-sampling graphite furnace AAS.

A fast and accurate analytical method was established for the simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by graphite furnace atomic absorption spectrometry using a slurry sampling technique and a Hitachi Model Z-9000 atomic absorption spectrometer. The slurry samples were prepared by the ultrasonication of silicon carbide or silicon nitride powders with 0.1 M nitric acid. Calibration curves were prepared by using a mixed standard solution containing aluminum, calcium, iron and 0.1 M nitric acid. The analytical results of the proposed method for aluminum, calcium and iron in silicon carbide and silicon nitride reference materials were in good agreement with the reference values. The detection limits for aluminum, calcium and iron were 0.6 microg/g, 0.15 microg/g and 2.5 microg/g, respectively, in solid samples, when 200 mg of powdered samples were suspended in 20 ml of 0.1 M nitric acid and a 10 microl portion of the slurry sample was then measured. The relative standard deviation of the determination of aluminum, calcium and iron was 5 - 33%.     

Biomimetic reactions of some macrocyclic diterpenes

Some macrocyclic diterpenes derived from euphohelioscopin A and euphornin have been stereoselectively converted into the jatropholane- and daphnane-type compounds and the known tricyclic compound which has been treated with phCOCl - pyridine to afford euphohelionone, the new type of diterpene isolated from euphorbia helioscopia L.     

Improved Quantitative Dynamic Range of Time-of-Flight Mass Spectrometry by Simultaneously Waveform-Averaging and Ion-Counting Data Acquisition

Two different types of data acquisition methods, “averaging mode” and “ion-counting mode”, have been used in a time-of-flight (TOF) mass spectrometry. The most common method is an averaging mode that sums waveform signals obtained from each flight cycle. While it is possible to process many ions arriving at the same TOF in one flight cycle, low-abundance ions are difficult to measure because ion signals are overwhelmed by noises from the detection system. An ion-counting mode is suitable for the detection of such low-concentration ions, but counting loss occurs when two or more ions arrive at the detector within the dead time of the acquisition system. In this study, we introduce a technique that combines two methods to measure target ions with a high concentration difference, i.e., averaging mode and ion-counting mode are used simultaneously for high abundant and trace ions, respectively. By processing waveforms concurrently during data acquisition, one can choose to analyze either or both types of data to achieve a highly quantitative mass spectrum over a wide range of sample concentrations. The result of the argon isotope analysis shows that this method provides a more accurate determination of the isotope ratio compared to averaging mode alone at one-twentieth of the analysis time required by ion-counting alone.

Open image in new window

Graphical Abstract ?

     

Mechanism of Enzymatic Hydrolysis of Poly(butylene succinate) and Poly(butylene succinate‐co‐L‐lactate) with a Lipase from Pseudomonas cepacia

Enzymatic hydrolysis of poly(butylene succinate) (PBS) and poly(butylene succinate‐co‐L ‐lactate) (PBSL) has been studied by using a lipase originated from Pseudomonas cepacia. It has been found that the drawn fibers of PBSL are readily hydrolyzed by the action of the lipase, while those of PBS undergo little enzymatic hydrolysis. Since the polymer films of PBS and PBSL are readily hydrolyzed under the same conditions, the enzymatic hydrolysis should depend not only on the crystallinity but also on the molecular orientation. The molecular weight of the samples gradually decreases with incubation time, because nonspecific hydrolysis occurs on the main chains of both PBS and PBSL even in the absence of lipase. The enzymatic hydrolysis of PBS and PBSL gives 4‐hydroxybutyl succinate (HBS) as the main product with traces of succinic acid and butane‐1,4‐diol together with L ‐lactic acid in the case of PBSL. In addition, the hydrolysis rate of the carboxyl end‐capped PBS is much slower than that of the original or hydroxyl end‐capped PBS. These results imply a hydrolysis mechanism involving the preferential exo‐type chain scission from the carboxyl terminals.

Mass remaining of various PBS and PBSL samples as a function of time.