Key role of the Lewis base position in asymmetric bifunctional catalysis: design and evaluation of a new ligand for chiral polymetallic catalysts

New chiral ligands for asymmetric polymetallic catalysts were designed on the basis of the assumption that the higher-order assembly structure is stabilized by modifying the modular unit. The designed ligands 6 and 7 contained a scaffolding cyclohexane ring with a Lewis base phosphine oxide directly attached to the scaffold. A module in the polymetallic complex contains two metals per ligand, and a stable 6-, 5-, 5-membered fused chelation ring system should be generated. Synthesis of these ligands is simple and high yielding, using a catalytic dynamic kinetic resolution promoted by the Trost catalyst as a key step. Ligand function was assessed in a catalytic asymmetric ring-opening reaction of meso-aziridines with TMSCN, a useful reaction for the synthesis of optically active beta-amino acids. The Gd complex generated from Gd(OiPr)3 and the ligand was a highly active and enantioselective catalyst in this reaction. Enantioselectivity was reversed compared to the previously reported d-glucose-derived catalyst containing the same chirality of the individual module. ESI-MS analysis and X-ray crystallographic studies indicate that the assembly state of the modules in the polymetallic catalysts differs depending on the chiral ligand. The difference in the higher-order structure stems from a subtle change (one carbon) in the position of the Lewis base relative to the Gd metal. The change in the higher-order structure of the polymetallic complex led to a dramatic reversal of the enantioselectivity and increased catalyst activity.     

Photoinduced reductive repair of thymine glycol: implications for excess electron transfer through DNA containing modified bases

Photoinduced reduction of thymine glycol in oligodeoxynucleotides was investigated using either a reduced form of flavin adenine dinucleotide (FADH(-)) as an intermolecular electron donor or covalently linked phenothiazine (PTZ) as an intramolecular electron donor. Intermolecular electron donation from photoexcited flavin (FADH(-)) to free thymidine glycol generated thymidine in high yield, along with a small amount of 6-hydroxy-5,6-dihydrothymidine. In the case of photoreduction of 4-mer long single-stranded oligodeoxynucleotides containing thymine glycol by *FADH(-), the restoration yield of thymine was varied depending on the sequence of oligodeoxynucleotides. Time-resolved spectroscopic study on the photoreduction by laser-excited N,N-dimethylaniline (DMA) suggested elimination of a hydroxyl ion from the radical anion of thymidine glycol with a rate constant of approximately 10(4) s(-1) generates 6-hydroxy-5,6-dihydrothymidine (6-HOT(*)) as a key intermediate, followed by further reduction of 6-HOT(*) to thymidine or 6-hydroxy-5,6-dihydrothymdine (6-HOT). On the other hand, an excess electron injected into double-stranded DNA containing thymine glycol was not trapped at the lesion but was further transported along the duplex. Considering redox properties of the nucleobases and PTZ, competitive excess electron trapping at pyrimidine bases (thymine, T and cytosine, C) which leads to protonation of the radical anion (T(-)(*), C(-)(*)) or rapid back electron transfer to the radical cation of PTZ (PTZ(+)(*)), is presumably faster than elimination of the hydroxyl ion from the radical anion of thymine glycol in DNA.     

Planar catechin analogues with alkyl side chains: a potent antioxidant and an alpha-glucosidase inhibitor

Planar catechin analogues having various alkyl side chain lengths were synthesized, and their remarkable antioxidative abilities and alpha-glucosidase inhibitory activities are shown.     

Synthesis of the putative structure of fistulosin using the ruthenium-catalyzed cycloisomerization of diene

Fistulosin 1, which was isolated from the root of the Welsh onion, is a novel indole alkaloid that has antifungal activity. The first total synthesis of the reported structure of fistulosin using our cycloisomerization of diene is described.     

Evaluation of left ventricular function with cardiac magnetic resonance imaging using Fourier fitting

The aims of this study were to investigate the applicability of Fourier fitting in the magnetic resonance (MR) evaluation of left ventricular (LV) function and to determine the optimal number of harmonics for fitting. Cine cardiac MR imaging was performed in 10 subjects, and an LV time–volume curve was generated. Fourier fitting was applied to the original curve using 1–10 harmonics, and the qualities of the time–volume curve and first-derivative curve were evaluated. LV functional parameters were calculated from curves generated with and without fitting. The quality of the original time–volume curve was good, and Fourier fitting had no substantial effect on functional parameters obtained directly from the time–volume curve such as ejection fraction. The first-derivative curve generated without fitting showed substantial artificial fluctuation. The application of Fourier fitting depressed the fluctuation and tended to decrease estimates of peak ejection rate and peak filling rate. Five or six harmonics appeared to be appropriate for obtaining a high-quality first-derivative curve. In conclusion, Fourier fitting was indicated to aid in reducing the artificial fluctuation of the first-derivative curve generated from cine cardiac MR imaging and to contribute to the evaluation of functional parameters derived from the first-derivative curve.     

A carbaboranylmercuric salt catalyzed reaction; highly regioselective cycloisomerization of 1,3-dienes

The combination of carbaboranylmercuric chloride (new type of bulky Lewis acid) and silver triflate efficiently catalyzes cycloisomerization of 1,3-dienes at room temperature. The catalytic system gives allyl-substituted azacycles and cycloalkanes in excellent yields with high to complete regioselectivity.     

Characterization of non-stoichiometric hydration and the dehydration behavior of sitafloxacin hydrate

Sitafloxacin (STFX) hydrate is a non-stoichiometric hydrate. The hydration state of STFX hydrate varies non-stoichiometrically depending on the relative humidity and temperature, though X-ray powder diffraction (XRPD) of STFX hydrate was not affected by storing at low and high relative humidities. The detailed properties of crystalline water of STFX hydrate were estimated in terms of hygroscopicity, thermal analysis combined with X-ray powder diffractometry, crystallography and density functional theory (DFT) calculation. STFX hydrate changed the water contents continuously and reversibly from an equivalent amount of dihydrate through that of sesquihydrate depending on the relative humidity at 25°C. Thermal analysis and X-ray powder diffraction (XRPD) simultaneous measurement also revealed that STFX hydrate dehydrated into a hydrated state equivalent to monohydrate by heating up to 100°C, whereas XRPD patterns were slightly affected. This indicated that the crystal structure of STFX hydrate was retained at the dehydration level of monohydrate. Single-crystal X-ray structural analysis showed that two STFX molecules and four water molecule sites were contained in an asymmetric unit. STFX molecules formed a channel structure where water molecules were included. At the partially dehydrated state, at least two of four water molecules were considered to be disordered in occupancy and/or coordinates. Insight into the crystal structure of STFX hydrate stored at low and high relative humidities and geometry of the hydrogen bond were helpful to estimate the origin of non-stoichiometric hydration of STFX hydrate.     

Simple and accurate scheme to compute electrostatic interaction: Zero-dipole summation technique for molecular system and application to bulk water

The zero-dipole summation method was extended to general molecular systems, and then applied to molecular dynamics simulations of an isotropic water system. In our previous paper [I. Fukuda, Y. Yonezawa, and H. Nakamura, J. Chem. Phys. 134, 164107 (2011)], for evaluating the electrostatic energy of a classical particle system, we proposed the zero-dipole summation method, which conceptually prevents the nonzero-charge and nonzero-dipole states artificially generated by a simple cutoff truncation. Here, we consider the application of this scheme to molecular systems, as well as some fundamental aspects of general cutoff truncation protocols. Introducing an idea to harmonize the bonding interactions and the electrostatic interactions in the scheme, we develop a specific algorithm. As in the previous study, the resulting energy formula is represented by a simple pairwise function sum, enabling facile applications to high-performance computation. The accuracy of the electrostatic energies calculated by the zero-dipole summation method with the atom-based cutoff was numerically investigated, by comparison with those generated by the Ewald method. We obtained an electrostatic energy error of less than 0.01% at a cutoff length longer than 13 A for a TIP3P isotropic water system, and the errors were quite small, as compared to those obtained by conventional truncation methods. The static property and the stability in an MD simulation were also satisfactory. In addition, the dielectric constants and the distance-dependent Kirkwood factors were measured, and their coincidences with those calculated by the particle mesh Ewald method were confirmed, although such coincidences are not easily attained by truncation methods. We found that the zero damping-factor gave the best results in a practical cutoff distance region. In fact, in contrast to the zero-charge scheme, the damping effect was insensitive in the zero-charge and zero-dipole scheme, in the molecular system we treated. We discussed the origin of this difference between the two schemes and the dependence of this fact on the physical system. The use of the zero damping-factor will enhance the efficiency of practical computations, since the complementary error function is not employed. In addition, utilizing the zero damping-factor provides freedom from the parameter choice, which is not trivial in the zero-charge scheme, and eliminates the error function term, which corresponds to the time-consuming Fourier part under the periodic boundary conditions.     

Determination of residual solvents in pharmaceuticals by thermal desorption-GC/MS.

A novel method for the determination of residual solvents in pharmaceuticals by thermal desorption (TD)-GC/MS has been established. A programmed temperature pyrolyzer (double shot pyrolyzer) is applied for the TD. This method does not require any sample pretreatment and allows very small amounts of the sample. Directly desorbed solvents from intact pharmaceuticals (ca. 1 mg) in the desorption cup (5 mm x 3.8 mm i.d.) were cryofocused at the head of a capillary column prior to a GC/MS analysis. The desorption temperature was set at a point about 20 degrees C higher than the melting point of each sample individually, and held for 3 min. The analytical results using 7 different pharmaceuticals were in agreement with those obtained by direct injection (DI) of the solution, followed by USP XXIII. This proposed TD-GC/MS method was demonstrated to be very useful for the identification and quantification of residual solvents. Furthermore, this method was simple, allowed rapid analysis and gave good repeatability.     

A Pair of Families of Non-isomorphic Group Association Schemes with the same Parameters

We show that for the split and non-split extensions ofFq²bySL (2, q) (q =  2^e,e  ≥  3), the group association schemes have the same parameters but are not isomorphic. For the split and non-split extensions ofFq²by the standard Borel subgroup of SL(2,q ) (q =  2^e, e ≥  3), the group association schemes are shown to be isomorphic.