Electrocatalytic Oxidation of Dopamine by Ferrocene in Lipid Film Cast on a Glassy Carbon Electrode

ＩｎｔｒｏｄｕｃｔｉｏｎＤＡｉｓｏｎｅｏｆｅｓｓｅｎｔｉａｌｐａｒｔｉｃｉｐａｎｔｓｉｎｔｈｅｎｅｕｒｏ ｔｒａｎｓｍｉｓｓｉｏｎｐｒｏｃｅｓｓｉｎｍａｍｍａｌｉａｎｃｅｎｔｒａｌｎｅｒｖｏｕｓｓｙｓ ｔｅｍ .ＡｌｏｓｓｏｆＤＡ ｃｏｎｔａｉｎｉｎｇｎｅｕｒｏｎｓｍａｙｒｅｓｕｌｔｉｎｓｏｍｅｓｅｒｉｏｕｓｄｉｓｅａｓｅｓｕｃｈａｓＰａｒｋｉｎｓｏｎｉｓｍ .1Ｓｉｎｃｅｉｔｓｄｉｓｃｏｖ ｅｒｙｉｎｔｈｅ 195 0ｓ ,ＤＡｈａｓｂｅｅｎｏｆｉｎｔｅｒｅｓｔｔｏｎｅｕｒｏｓｃｉｅｎ ｔｉｓｔｓａｎｄｃｈｅｍ…     

Interfacial micellar structures from novel amphiphilic star polymers

An amphiphilic heteroarm star polymer containing 12 alternating hydrophobic/hydrophilic arms of polystyrene (PS) and poly(acrylic acid) (PAA) connected to a well-defined rigid aromatic core was studied at the air-water and the air-solid interfaces. At the air-water interface, the molecules spontaneously form pancakelike micellar aggregates which measure up to several microns in diameter and 5 nm in thickness. Upon reduction of the surface area per molecule to 7 nm2, the two-dimensional micelles merged into a dense monolayer. We suggest that confined phase separation of dissimilar polymer arms occurred upon their segregation on the opposite sides of the rigid disklike aromatic core, forcing the rigid cores to adopt a face-on orientation with respect to the interface. Upon transfer onto solid supports the PS chains face the air-film interface making it completely hydrophobic, and the PAA chains were found to collapse and form a thin flattened underlayer. This study points toward new strategies to create large 2D microstructures with facial amphiphilicity and suggests a profound influence of star molecular architecture on the self-assembly of amphiphiles at the air-water interface.     

Pt(111) 表面上表层 Fe (FeO) 结构和次表层 Fe 结构的可控转变

 利用扫描隧道显微镜 (STM) 和 X 射线光电子能谱 (XPS) 对 Pt(111) 表面制备的 Fe 单层薄膜及其在不同环境气氛条件下的多种结构进行了研究. 在温度为 487 K 的 Pt(111) 表面制备出了完整的 Fe 单层薄膜Fe/Pt(111). 对 Fe/Pt(111) 依次升高温度进行超高真空退火, STM 和 XPS 结果表明退火温度高于 800 K 时, 表面 Fe 原子扩散到次表层区域, 形成次表层 Fe 结构Pt/Fe/Pt(111). Pt/Fe/Pt(111) 在 O2 氧化气氛中经 850 K 退火可转变成表面 FeO 薄膜FeO/Pt(111). FeO/Pt(111) 结构在温和的 H2 还原气氛中 (600 K) 转变成表面 Fe 结构, 进一步的还原处理 (800 K) 则可以重新生成 Pt/Fe/Pt(111). 控制样品的环境气氛在 O2 和 H2 之间切换, 使得表面 Fe (FeO) 和次表面 Fe 可以重复地转变. 本研究实现了多种 Fe-Pt 表面结构的可控制备, 可为合理地设计高效、价廉的催化剂提供借鉴.     

Conjugated copolymers comprised cyanophenyl‐substituted spirobifluorene and tricarbazole‐triphenylamine repeat units for blue‐light‐emitting diodes

A series of conjugated blue‐light‐emitting copolymers, PTC‐1 , PTC‐2 , and PTC‐3, comprised different ratios of electron‐withdrawing segments (spirobifluorene substituted with cyanophenyl groups) and electron‐donating segments (tricarbazole‐triphenylamines), has been synthesized. The structures of these polymers were characterized and their thermal, photophysical, electrochemical, and electroluminescence properties were measured. Incorporation of rigid spirobifluorene units into the copolymers led to blue‐shifted absorption peaks in dilute toluene solution. Cyclic voltammetric measurement indicated the bandgaps of the polymers were in the range of 2.77–2.94 eV. It was found that increasing cyanophenyl‐spirobifluorene content in the polymer backbone lowered both the HOMO and LUMO energy levels of the copolymers, which was beneficial for electron injection/transporting in the polymer layer of the device. OLED device evaluation indicated that all the polymers emitted sky blue to deep blue light when the pure polymers were used as the emissive layers in the devices with a configuration of ITO/PEDOT:PSS/polymers/CsF/Ca/Al. The devices have been optimized by doping 30 wt % PBD into the polymer layers. Among the doped devices, PTC‐2 showed the best performance with the turn‐on voltage of 3.0 V, maximum brightness of 7257 cd/m², maximum current efficiency of 1.76 cd/A, and CIE coordinates of (0.15, 0.14). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 292–301, 2010     

Blue‐light‐emitting polyfluorene functionalized with triphenylamine and cyanophenylfluorene bipolar side chains

A new bipolar conjugated polyfluorene copolymer with triphenylamine and cyanophenylfluorene as side chains, poly{[9,9‐di(triphenylamine)fluorene]‐[9,9‐dihexyl‐fluorene]‐[2,7‐bis(4′‐cyanophenyl)‐9,9′‐spirobifluorene]} ( PTHCF ), was synthesized for studying the polymer backbone emission. Its absolute weight‐average molecular weight was determined as 4.85 × 10⁴ by using gel permeation chromatography with a multiangle light scattering detector. In contrast to the electronic absorption spectrum in dilute solution, the absorbance of PTHCF in thin film was slightly blue shifted. By comparison of the solution and thin‐film photoluminescence (PL) spectra, a red shift of Δλ = 8–9 nm was observed in the thin‐film PL spectrum. The HOMO and LUMO energy levels of the resulting polymer were electrochemically estimated as ?5.68 and ?2.80 eV, respectively. Under the electric‐field intensity of 4.8 × 10⁵ V cm^?1, the obtained hole and electron mobilities were 2.41 × 10^?4 and 1.40 × 10^?4 cm² V^?1 s^?1, respectively. An electroluminescence device with configuration of ITO/PEDOT:PSS/ PTHCF _70%+PBD_30%/CsF/Ca/Al exhibited a deep‐blue emission as a result of excitons formed by the charges migrating along the full‐fluorene main chain. The incorporation of the bipolar side chains into the polymer structure prevented the intermolecular interaction of the fluorene moieties, balance charge injection/transport, and thereby improve the polymer backbone emission. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Reticular Sn nanoparticle-dispersed PAN-based carbon nanofibers for anode material in rechargeable lithium-ion batteries

Reticular tin nanoparticle-dispersed carbon (Sn/C) nanofibers were fabricated by stabilization of electrospun SnCl₄/PAN composite fibers and subsequent carbonization at different temperatures. These Sn/C composite nanofibers used as anode materials for rechargeable lithium-ion batteries (LIBs) show that the Sn/C nanofibers at 700 and 850 °C present much higher charge (785.8 and 811 mA h g^?1) and discharge (1211.7 and 993 mA h g^?1) capacities than those at 550 and 1000 °C and the as-received CNFs at 850 °C, corresponding to coulombic efficiencies of 64.9% and 81.7%, respectively. The superior electrochemical properties of the intriguing Sn/C nanofibers indicate a promising application in high performance Li-ion batteries.     

Chiral N-phosphonyl imine chemistry:asymmetric additions of glycine enolate to diphenyl diamine-based phosphonyl imines

Diphenyl diamine-based phosphonyl imines attached by the N-isopropyl group in the auxiliary have been synthesized in good yields under convenient reaction conditions.These new chiral N-phosphonyl imines can react with glycine enolate smoothly to give chiral α-β diamino esters in good yields(72%-90%) and up to excellent diastereoselectivity(>99:1 dr).By treatment with HBr,the chiral auxiliary can be readily removed.The absolute structure has been unambiguously determined by converting a product to a known sa...     

Dissipative particle dynamic simulation study of lipid membrane

The lipid membrane plays crucial roles in countless biologic processes, ranging from cell motility, endo- and exocytosis, and cell division to protein aggregation and trafficking. To gain a molecular insight in these biologic processes, the recently developed mesoscale simulation technique, dissipative particle dynamics (DPD) simulation, has become an invaluable tool. By providing a brief survey of existing atomistic and popular coarse-grained models used today in studying the dynamics (including vesicle formation and (protein-mediated) vesicle fusion) and phase behavior of lipid bilayers, this review illustrates how mesoscopic DPD models can be used to obtain a better understanding of these biologic processes currently inaccessible to atomistic and most coarse-grained models.     

原位实时近红外光谱研究核壳乳液聚合过程

将苯乙烯(St)和丙烯酸丁酯(BA)单体以不同的聚合方式制备核壳乳液和共聚乳液, 并采用近红外光谱技术实现了对乳液反应过程的原位实时监测, 通过对近红外光谱的谱带归属和主成分分析, 为近红外光谱技术判别乳液聚合过程提供了科学依据, 也为判断反向核壳乳液核壳翻转的拐点提出了一种新的方法. 采用簇类独立软模式法(SIMCA)建立了定性判别模型, 得到了很好的判别结果, 为进一步研究近红外光谱技术用于核壳乳液聚合过程奠定了基础.