Mucoadhesive vaginal film of fluconazole using cross-linked chitosan and pectin

A series of silica gels (Si-40, Si-60, Si-100) and related carbon–silica gels, prepared by carbonization of CH₂Cl₂ at a surface of silica gels at 550 °C, characterized using FTIR/PAS, SEM/EDX, and nitrogen adsorption, was investigated upon interactions with polar (water, dimethylsulfoxide), weakly polar (chloroform), and nonpolar (n-hexane, n-decane, benzene, toluene) adsorbates using adsorption and differential scanning calorimetry methods. Features of confined space effects, such as freezing/melting point depression and melting delay, depend strongly on pore sizes, pore wall structure, type and amount of adsorbates, and the degree of pore filling. Melting curves of both polar and nonpolar adsorbates bound in broad pores (Si-60 and Si-100 based materials) can include two–three peaks around melting point, but for Si-40-based materials, a number of similar peaks is smaller. This occurs due to step-by-step melting of frozen structures located in broader pores and the absence of similar effects in narrower pores. The present study shows that complex carbon–silica gel adsorbents can be more effective adsorbents than simple silica gels due to the presence of a number of surface sites of various polarity and structure.

     

Evaluation of the stability of nonfouling ultrathin poly(ethylene glycol) films for silicon-based microdevices

The creation of nonfouling surfaces is one of the major prerequisites for microdevices for biomedical and analytical applications. Poly(ethylene glycol) (PEG), a water soluble, nontoxic, and nonimmunogenic polymer has the unique ability of reducing nonspecific protein adsorption and cell adhesion and, therefore, is generally coupled with a wide variety of surfaces to improve their biocompatibility. The performance of these modified surfaces for long-term biomedical applications largely depends on the stability of these PEG films. To this end, we have investigated the stability of covalently coupled ultrathin PEG films on silicon in aqueous in vivo like conditions for a period of 4 weeks. The PEG-modified silicon substrates were incubated in PBS (37 degrees C, pH 7.4, 5% CO2) for different periods of time and then characterized using the techniques of ellipsometry, contact angle measurement, X-ray photoelectron spectroscopy, and atomic force microscopy. The ability of the PEG-modified surfaces to control protein fouling was examined by protein adsorption studies using fluorescein isothiocyanate labeled bovine serum albumin and ellipsometry. Furthermore, the ability of these films to control fibroblast adhesion was examined. Studies suggest that the PEG-modified surfaces retain their protein and cell repulsive nature even though the PEG film thickness decreases for the period of investigation.     

Graphene Oxide-Based Stimuli-Responsive Platforms for Biomedical Applications

Graphene is a two-dimensional sp² hybridized carbon material that has attracted tremendous attention for its stimuli-responsive applications, owing to its high surface area and excellent electrical, optical, thermal, and mechanical properties. The physicochemical properties of graphene can be tuned by surface functionalization. The biomedical field pays special attention to stimuli-responsive materials due to their responsive abilities under different conditions. Stimuli-responsive materials exhibit great potential in changing their behavior upon exposure to external or internal factors, such as pH, light, electric field, magnetic field, and temperature. Graphene-based materials, particularly graphene oxide (GO), have been widely used in stimuli-responsive applications due to their superior biocompatibility compared to other forms of graphene. GO has been commonly utilized in tissue engineering, bioimaging, biosensing, cancer therapy, and drug delivery. GO-based stimuli-responsive platforms for wound healing applications have not yet been fully explored. This review describes the effects of different stimuli-responsive factors, such as pH, light, temperature, and magnetic and electric fields on GO-based materials and their applications. The wound healing applications of GO-based materials is extensively discussed with cancer therapy and drug delivery.     

Quantitative preparation of allyl telechelic polyisobutylene under reflux conditions

Allyl telechelic polyisobutylene (allyl‐PIB‐allyl) is of great commercial and scientific interest produced by living polymerization of isobutylene followed by functionalization (allylation with allyltrimethylsilane) under external cooling, typically to ?78 °C. Cooling is cumbersome and costly, and temperature control is far from ideal. Herein we describe the quantitative preparation of allyl‐PIB‐allyl under ideal internal temperature control at ～?40 °C using refluxing propane/methyl chloride mixtures. The exact composition of the nonpolar/polar solvents and polymerization time crucially affect product quality. Well‐defined allyl‐PIB‐allyl is obtained using 60/40 (v/v) refluxing propane/methyl chloride and terminating not more than 5 min after monomer depletion. In pure refluxing propane or methyl chloride, or at longer reaction times, byproducts form that compromise product quality. A mechanism is presented to explain the observations. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1784–1789     

Quantification of Lupeol in Polyherbal Formulation by High-Performance Thin-Layer Chromatography Method Using Design of Experiments as a Tool to Assess Optimization of Method Development and Extraction Efficiency

JPC – Journal of Planar Chromatography – Modern TLC - A simple, specific, and quantitative high-performance thin-layer chromatographic (HPTLC) method has been developed for the...     

Role of stabilizing agents in the formation of stable silver nanoparticles in aqueous solution: Characterization and stability study

The stability of silver nanoparticles is controlled mainly by two major factors, namely, aggregation and oxidation. In the present study, silver nanoparticles were synthesized by using different series of reducing agents like a strong reducing agent (sodium borohydride), a mild reducing agent (tri-sodium citrate), and a weak reducing agent (glucose) with different capping agents, namely, polyvinyl pyrrolidone (PVP K 30), starch, and sodium carboxyl methyl cellulose (NaCMC). The synthesized silver nanoparticles were characterized by UV-Visible absorption spectroscopy, dynamic light scattering (DLS), atomic force microscopy (AFM), and anti-microbial activity. The particle size of silver nanoparticles varies in the following order: sodium borohydride < tri-sodium citrate < glucose. Combination of sodium borohydride–polyvinyl pyrrolidone and tri-sodium citrate-polyvinyl pyrrolidone yields stable silver nanoparticles compared to other combinations of reducing agents and capping agents. The stability results confirmed that a refrigerated condition (8°C) was more suitable for storage of silver nanoparticles. Anti-microbial activity of silver nanoparticles synthesized in a sodium borohydride–polyvinyl pyrrolidone mixture shows a larger zone of inhibition compared to other silver nanoparticles. Anti-microbial results confirmed that the anti-microbial activity is better with smaller particle size. The size and stability of silver nanoparticles in the presence of different combinations of stabilizing and capping agents are reported.     

Recent Advances in 3D Printing of Photocurable Polymers: Types,Mechanism, and Tissue Engineering Application

The conversion of liquid resin into solid structures upon exposure to light of a specific wavelength is known as photopolymerization. In recent years, photopolymerization-based 3D printing has gained enormous attention for constructing complex tissue-specific constructs. Due to the economic and environmental benefits of the biopolymers employed, photo-curable 3D printing is considered an alternative method for replacing damaged tissues. However, the lack of suitable bio-based photopolymers, their characterization, effective crosslinking strategies, and optimal printing conditions are hindering the extensive application of 3D printed materials in the global market. This review highlights the present status of various photopolymers, their synthesis, and their optimization parameters for biomedical applications. Moreover, a glimpse of various photopolymerization techniques currently employed for 3D printing is also discussed. Furthermore, various naturally derived nanomaterials reinforced polymerization and their influence on printability and shape fidelity are also reviewed. Finally, the ultimate use of those photopolymerized hydrogel scaffolds in tissue engineering is also discussed. Taken together, it is believed that photopolymerized 3D printing has a great future, whereas conventional 3D printing requires considerable sophistication, and this review can provide readers with a comprehensive approach to developing light-mediated 3D printing for tissue-engineering applications.     

Microfabricated implants for applications in therapeutic delivery, tissue engineering, and biosensing

By adapting microfabrication techniques originally developed in the microelectronics industry novel devices for drug delivery, tissue engineering and biosensing have been engineered for in vivo use. Implant microfabrication uses a broad range of techniques including photolithography, and micromachining to create devices with features ranging from 0.1 to hundreds of microns with high aspect ratios and precise features. Microfabrication offers device feature scale that is relevant to the tissues and cells to which they are applied, as well as offering ease of en masse fabrication, small device size, and facile incorporation of integrated circuit technology. Utilizing these methods, drug delivery applications have been developed for in vivo use through many delivery routes including intravenous, oral, and transdermal. Additionally, novel microfabricated tissue engineering approaches propose therapies for the cardiovascular, orthopedic, and ocular systems, among others. Biosensing devices have been designed to detect a variety of analytes and conditions in vivo through both enzymatic-electrochemical reactions and sensor displacement through mechanical loading. Overall, the impact of microfabricated devices has had an impact over a broad range of therapies and tissues. This review addresses many of these devices and highlights their fabrication as well as discusses materials relevant to microfabrication techniques.     

Survival, migration and differentiation of retinal progenitor cells transplanted on micro-machined poly(methyl methacrylate) scaffolds to the subretinal space

Stem and progenitor cells can be combined with polymer substrates to generate tissue equivalents in culture. The replacement of retinal tissue lost to disease or trauma using retinal progenitor cells (RPCs) delivered on polymer scaffolds and transplanted into the sub-retinal space of the damaged retina is a promising therapeutic strategy. Micromachining-based, ultra-thin PMMA poly(methyl methacrylate) scaffolds may provide a suitable cytoarchitectural environment for tissue engineering and transplantation to the diseased eye. Here, adhesion of RPCs to polymer, as well as migration and differentiation in the host retina were compared for PMMA scaffolds (6 microm thickness) with either smooth or porous (11 microm diameter) surface topography. RPCs were cultured under identical conditions on smooth or porous laminin-coated polymer scaffolds and transplanted into the subretinal space of C57BL/6 mice. RPCs could be cultured on both scaffolds with similar results, although transplantation with non-porous scaffolds showed limited RPC retention. Porous scaffolds demonstrated enhanced RPC adherence during transplantation and allowed for greater process outgrowth and cell migration into the host retinal layers. Integrated cells expressed the mature neuronal marker neurofilament-200 (nf-200), the glial marker glial fibrillary acidic protein (GFAP) and the retinal-specific marker recoverin. No host foreign body response was seen. In conclusion, ultra-thin film PMMA scaffolds micromachined to contain through pores retain adherent RPCs to a considerably greater extent than unmachined versions during the transplantation process and can serve as a biocompatible substrate for cell delivery in vivo.     

Modeling of RGDC film parameters using X-ray photoelectron spectroscopy

Immobilization of peptides on surfaces is a common method to investigate biological response to biomaterials for the development of improved tissue engineering constructs. Peptide immobilization can be achieved by either physical adsorption or covalent attachment on the surface. In this work, the RGDC peptide was covalently immobilized to alumina substrate for investigation of bone cell response. An understanding of RGDC film formation is necessary for further biological characterization. Thus, X-ray photoelectron spectroscopy was used to chemically characterize these films. These data were further utilized to calculate RGDC film thickness, density, and coverage, which are essential for understanding bone cell interactions with the underlying films and substrate.