Correlations between distribution coefficients of various biomolecules in different polymer/polymer aqueous two-phase systems

Distribution coefficients for a variety of proteins and certain other biomolecules (peptides, amino acids, and carbohydrates) (overall 27 different solutes) were measured in aqueous two-phase systems (ATPSs) dextran (Dex)–polyethylene glycol (PEG) and Dex–Ucon 50-HB-5100 (Ucon—a random copolymer of ethylene glycol and propylene glycol) both containing 0.15 M NaCl in 0.01 M phosphate buffer, pH 7.4, at 23 °C. Distribution coefficients of some selected solutes were also measured in the above two-phase systems at three different polymer concentrations for each system. It was established that the distribution coefficients for all the proteins examined in the ATPSs are correlated according to the so-called Collander linear equation.     

An electrochemical sensor for dipyrone determination based on nickel-salen film modified electrode

An amperometric dipyrone sensor based on a polymeric nickel-salen (salen = N,N´-ethylenebis(salicydeneiminato)) film coated platinum electrode was developed. The sensor was constructed by electropolymerization of nickel-salen complex at a platinum electrode in acetonitrile/tetrabuthylamonium perchlorate by cyclic voltammetry. After cycling the modified electrode in a 0.50 mol L^-1 KCl solution, the estimated surface concentration was found to be equal to 1.29 x 10^-9 mol cm^-2. This is a typical behavior of an electrode surface immobilized with a redox couple that can usually be considered as a reversible single-electron reduction/oxidation of the nickel(II)/nickel(III) couple. A plot of the anodic current versus the dipyrone concentration for chronoamperometry (potential fixed = +0.50 V) at the sensor was linear in the 4.7 x 10^-6 to 1.1 x 10^-4 mol L^-1 concentration range and the concentration limit was 1.2 x 10^-6 mol L^-1. The proposed electrode is useful for the quality control and routine analysis of dipyrone in pharmaceutical formulations.     

Carboxymethylcellulose obtained by ethanol/water organosolv process under acid conditions

Sugar cane bagasse pulps were obtained by ethanol/water organosolv process under acid and alkaline conditions. The best condition of acid pulping for the sugarcane bagasse was 0.02 mol/L sulfuric acid at 160 degrees C, for 1 h, whereas the best condition for alkaline pulping was 5% sodium hydroxide (base pulp) at 160 degrees C, for 3 h. For the residual lignin removal, the acid and alkaline pulps were submitted to a chemical bleaching using sodium chlorite. Pulps under acid and alkaline conditions bleached with sodium chlorite presented viscosities of 3.6 and 7.8 mPa x s, respectively, and mu-kappa numbers of 1.1 and 2.4, respectively. The pulp under acid condition, bleached with sodium chlorite was used to obtain carboxymethylcellulose (CMC). CMC yield was 35% (pulp based), showing mass gain after the carboxymethylation reaction corresponding to 23.6% of substitution or 0.70 groups -CH(2) COONa per unit of glucose residue. The infrared spectra showed the CMC characteristic bands and by the infrared technique it was possible to obtain a substitution degree (0.63), similar to the substitution degree calculated by mass gain (0.70).     

Model and simulation of Na+/K+ pump phosphorylation in the presence of palytoxin

The ATP hydrolysis reactions responsible for the Na(+)/K(+)-ATPase phosphorylation, according to recent experimental evidences, also occur for the PTX-Na(+)/K(+) pump complex. Moreover, it has been demonstrated that PTX interferes with the enzymes phosphorylation status. However, the reactions involved in the PTX-Na(+)/K(+) pump complex phosphorylation are not very well established yet. This work aims at proposing a reaction model for PTX-Na(+)/K(+) pump complex, with similar structure to the Albers-Post model, to contribute to elucidate the PTX effect over Na(+)/K(+)-ATPase phosphorylation and dephosphorylation. Computational simulations with the proposed model support several hypotheses and also suggest: (i) phosphorylation promotes an increase of the open probability of induced channels; (ii) PTX reduces the Na(+)/K(+) pump phosphorylation rate; (iii) PTX may cause conformational changes to substates where the Na(+)/K(+)-ATPase may not be phosphorylated; (iv) PTX can bind to substates of the two principal states E1 and E2, with highest affinity to phosphorylated enzymes and with ATP bound to its low-affinity sites. The proposed model also allows previewing the behavior of the PTX-pump complex substates for different levels of intracellular ATP concentrations.     

Cu2O spheres as an efficient source of catalytic Cu(I) species for performing azide-alkyne click reactions

We report herein the high yield synthesis of Cu₂O spheres displaying well-defined shapes and monodisperse sizes that could be employed as the source of highly catalytic active Cu(I) species towards click reactions between several of alkynes and azides to produce a variety of 1,2,3-triazoles under ligand-free and ambient conditions (in an open reactor). The utilization of Cu₂O spheres enabled superior performance as compared to a conventional protocol in which CuSO₄ is employed in combination with sodium ascorbate as the catalyst system. In addition, the compounds were obtained in synthetically useful yields, and seven of them have not been previously reported. We believe the results reported herein shed new insights into the optimization of activity and versatility of click reactions towards the synthesis of target molecules in environmentally friendly conditions.     

Thermal and kinetic evaluation of cotton oil biodiesel

The biodiesel obtained by transesterification by reaction between ester and an alcohol in the presence of catalyst. The purpose of this work is to evaluate the thermal and kinetic behavior of the methanol biodiesel derived from cotton oil. The quality analysis was done by gas chromatography and proton nuclear magnetic resonance spectrometry (¹H NMR) in order to examine if the product meets with the requirements of the European Standard EN 1403. The thermogravimetric profile of the cotton biodiesel indicated that the decomposition steps are associated to the volatilization and/or decomposition of the methyl esters. Kinetic data was also obtained by thermal analysis.     

Dielectric,morphological and structural properties of lithium ferrite powders prepared by solid state method

Lithium ferrite (LiFe₅O₈) is one of the most known cubic ferrites which belong to the group of soft ferrite materials with high Curie temperature, presenting a square hysteresis loop, and high magnetization. It has attracted special attention due to its numerous technological applications in microwave devices, magnetic recording, transformer cores, rod antennas and possible applications in biomedics. It is also a promising candidate for cathode materials in rechargeable lithium batteries as well as low cost substitutes to garnet materials in microwave frequency applications.In the present work, amorphous Li₂O–Fe₂O₃ powders were prepared via wet ball milling method. The as-prepared powders were heat-treated at temperatures between 400 and 1400 °C and their structure analyzed by X-ray diffraction and Raman spectroscopy. The morphology was observed by scanning electron microscopy. Electrical and dielectric properties, in the frequency range between 100 and 2 MHz and temperatures between 200 and 360 K, were performed, and the results related with the structure and morphological characteristics.     

Pesticide residues in herbs and their transfer for infusions

In this work, a cost-effective gas chromatography-mass spectrometry method was validated for the analysis of twenty-five pesticide residues in herbs and infusions using a quick, easy, cheap, effective, rugged, and safe procedure or a dispersive liquid-liquid microextraction method, respectively. Figures of merit of the method showed good accordance with current guidelines. From the 58 herb samples studied (pertaining to 20 different species), 80% presented at least one detectable pesticide, with 62% of them above the maximum residual level. Results showed that pesticide residues from naturally contaminated herbs were not transferred at a significant rate to the herbal infusions. When a control assay was conducted by spiking a blank herb sample with a large amount of each pesticide (7 mg/L) 15 analytes were detected below the limit of quantification in the infusion.