PbO2-based graphite-epoxy electrode for potentiometric determination of acids and bases in aqueous and aqueous-ethanolic media

The construction and analytical evaluation of a PbO2-based graphite-epoxy electrode sensitive to H3O+, based on incorporation of lead(IV) oxide in a graphite-epoxy matrix, are described. The data obtained from a variety of acid-base titrations in aqueous and aqueous-ethanolic media were compared with those obtained by use of a glass electrode under the same conditions. The proposed electrode provides a linear response in the pH range from 1 to 11 with a slope of -58.7+/-0.3 mV pH(-1) and -60.8+/-0.2 mV pH(-1) in aqueous and ethanolic media, respectively. The response time was less than 15 s and the lifetime of the electrode was at least eight months (ca. 5000 determinations) and its performance is good in pH determination and end-point detection in potentiometric acid-base titrations in both aqueous and aqueous-ethanolic media.     

Polyisoprenylated benzophenone derivatives from Clusia obdeltifolia

Two new polyisoprenylated benzophenones along with the known compound 28,29-Epoxyplukenetione A were isolated from the hexane extract of Clusia obdeltifolia after extensive chromatographic procedures. One of the new benzophenone presented a novel 9-oxa-tetracyclic [11.3.1.0^1,10.0^3,8]heptadec-10-ene-12,17-dione moiety arising from complex cyclizations of isopentenyl and lavandulyl substituents. The other presented an adamantyl skeleton.     

Determination of biodiesel content when blended with mineral diesel fuel using infrared spectroscopy and multivariate calibration

In this work, multivariable calibration models based on middle- and near-infrared spectroscopy were developed in order to determine the content of biodiesel in diesel fuel blends, considering the presence of raw vegetable oil. Soybean, castor and used frying oils and their corresponding esters were used to prepare the blends with conventional diesel. Results indicated that partial least squares (PLS) models based on MID or NIR infrared spectra were proven suitable as practical analytical methods for predicting biodiesel content in conventional diesel blends in the volume fraction range from 0% to 5%. PLS models were validated by independent prediction set and the RMSEPs were estimated as 0.25 and 0.18 (%, v/v). Linear correlations were observed for predicted vs. observed values plots with correlation coefficient (R) of 0.986 and 0.994 for the MID and NIR models, respectively. Additionally, principal component analysis (PCA) in the MID region 1700 to 1800 cm^− 1 was suitable for identifying raw vegetable oil contaminations and illegal blends of petrodiesel containing the raw vegetable oil instead of ester.     

Spectrophotometric determination of tin in copper-based alloys using pyrocatechol violet

In the present paper, a new procedure using Pyrocatechol Violet (PCV) for the determination of tin in copper-based alloys is proposed. The use of HEDTA as masking agent allowed tin to be determined in the presence of large amounts of copper, without any separation procedure. The method is more selective than previous methods. Cetyltrimethylammonium bromide (CTAB) and Tween-20 are used to increase the stability of the system.

The method can be applied directly to an acidic solution of Sn(IV) in the range 2.0–60.0 μg with a final volume of 50 ml. The pH is adjusted to 2.0 ± 0.2 with glycine buffer and, after 30 min, the absorbance is measured at 660 nm. Al(III), Cd(II), Co(II), Mg(II), Ca(II), Mn(II), Ni(II) and Pb(II) do not interfere at the 500 mg level; 20 000 μg of Cu(II) and 400 μg of NaCl can be present. The interference at 100 μg of Fe(III) can be masked with ascorbic acid. Bi(III), Sb(V), Ti(IV), Mo(VI), EDTA, tartrate, citrate and iodide interfere. The proposed method was used for tin determination in several copper-based alloys and a comparison of the analytical results with certified values indicates that the procedure provides accurate and precise results.     

Alkaline and peracetic acid pretreatments of biomass for ethanol production

Prehydrolysis with dilute acid and steam explosion constitute the most promising methods for improving enzymatic digestibility of biomass for ethanol production. Despite world wide acceptance, these methods of pretreatment are quite expensive considering costs for the reactor, energy, and fractionation. Using peracetic acid is a lignin-oxidation pretreatment with low-energy input by which biomass can be treated in a silo-type system without need for expensive capitalization. Experimentally, ground hybrid poplar and sugar cane bagasse are placed in plastic bags and a peracetic acid solution is added to the biomass in different concentrations based on ovendried biomass. The ratio of solution to biomass is 6∶1 and a 7-d storage period at ambient temperature (20°C) has been used. As an auxiliary method, a series of pre-pretreatments using stoichiometri camounts of sodium hydroxide and ammonium hydroxide based on 4-methyl-glucuronic acid and acetyl content in the biomass are performed before addition of peracetic acid. The basic solutions are added to the biomass in a ratio of 14∶1 solution to biomass, and mixed for 24 h at the same ambient temperature. Biomass is filtered and washed to a neutral pH before peracetic acid addition. The aforementioned procedures give high xylan content substrates as a function of the selectivity of peracetic acid for lignin oxidation and the mild conditions of the process. Consequently, xylanase/β-glucosidase combinations were more effective than cellulase preparations in hydrolyzing these materials. The pretreatment efficiency was evaluated through enzymatic hydrolysis and simultaneous saccharification and cofermentation (SSCF) tests. Peracetic ac treatment improves enzymatic digestibility of hybrid poplar and sugar cane bagasse with no need of high temperatures. Alkaline treatments are helpful in reducing peracetic acid requirements in the pretreatment.     

In silico targeting PAD4 for the treatment of rheumatoid arthritis

Structural Chemistry - Rheumatoid arthritis (RA) is an autoimmune disorder that causes chronic inflammation with periodic bursts of activity in multiple synovial joints which lead to irreversible...     

Thermal analysis (TG–DSC,DSC–microscopy and EGA) and characterization of heavy trivalent lanthanides and yttrium isonicotinates

Journal of Thermal Analysis and Calorimetry - The trivalent lanthanide isonicotinates were synthesized to obtain stoichiometry Lu(IN)3 and Ln(IN)3·2H2O (Ln?=?Tb to Lu, and Y;...     

Crack repair using an elastic filler

The effect of repairing a crack in an elastic body using an elastic filler is examined in terms of the stress intensity levels generated at the crack tip. The effect of the filler is to change the stress field singularity from order 1/r^1/2 to 1/r^(1-λ) where r is the distance from the crack tip, and λ is the solution to a simple transcendental equation. The singularity power (1-λ) varies from (the unfilled crack limit) to 1 (the fully repaired crack), depending primarily on the scaled shear modulus ratio γ_r defined by G₂/G₁=γ_rε, where 2πε is the (small) crack angle, and the indices (1, 2) refer to base and filler material properties, respectively. The fully repaired limit is effectively reached for γ_r≈10, so that fillers with surprisingly small shear modulus ratios can be effectively used to repair cracks. This fits in with observations in the mining industry, where materials with G₂/G₁ of the order of 10^-3 have been found to be effective for stabilizing the walls of tunnels. The results are also relevant for the repair of cracks in thin elastic sheets.     

A new synthesis of (−)-thioambrox and its 8-epimer

This new and straightforward synthesis of (−)-thioambrox 2, a sulphur compound whose odour resembles ambergris, starts from sclareolide 4. The stereoselectivity of the final cyclization is independent of the catalyst selected, and compound 2 is always favoured over (+)-iso-thioambrox 3. With hydrochloric acid as catalyst, the cyclization is unexpectedly stereospecific to give 2 in high yield at room temperature.