Synthesis of New Chlorin e6 Trimethyl and Protoporphyrin IX Dimethyl Ester Derivatives and Their Photophysical and Electrochemical Characterizations

In view of increasing demands for efficient photosensitizers for photodynamic therapy (PDT), we herein report the synthesis and photophysical characterizations of new chlorin e₆ trimethyl ester and protoporphyrin IX dimethyl ester dyads as free bases and Zn^II complexes. The synthesis of these molecules linked at the β‐pyrrolic positions to pyrano[3,2‐c]coumarin, pyrano[3,2‐c]quinolinone, and pyrano[3,2‐c]naphthoquinone moieties was performed by using the domino Knoevenagel hetero Diels–Alder reaction. The α‐methylenechromanes, α‐methylenequinoline, and ortho‐quinone methides were generated in situ from a Knoevenagel reaction of 4‐hydroxycoumarin, 4‐hydroxy‐6‐methylcoumarin, 4‐hydroxy‐N‐methylquinolinone, and 2‐hydroxy‐1,4‐naphthoquinone, respectively, with paraformaldehyde in dioxane. All the dyads as free bases and as Zn^II complexes were obtained in high yields. All new compounds were fully characterized by 1D and 2D NMR techniques, UV/Vis spectroscopy, and HRMS. Their photophysical properties were evaluated by measuring the fluorescence quantum yield, the singlet oxygen quantum yield by luminescence detection, and also the triplet lifetimes were correlated by flash photolysis and intersystem crossing (ISC) rates. The fluorescence lifetimes were measured by a time‐correlated single photon count (TCSPC) method, fluorescence decay associated spectra (FDAS), and anisotropy measurements. Magnetic circular dichroism (MCD) and circular dichroism (CD) spectra were recorded for one Zn^II complex in order to obtain information, respectively, on the electronic and conformational states, and interpretation of these spectra was enhanced by molecular orbital (MO) calculations. Electrochemical studies of the Zn^II complexes were also carried out to gain insights into their behavior for such applications.     

A Bis(pyridine N‐oxide) Analogue of DOTA: Relaxometric Properties of the GdIII Complex and Efficient Sensitization of Visible and NIR‐Emitting Lanthanide(III) Cations Including PrIII and HoIII

We report the synthesis of a cyclen‐based ligand (4,10‐bis[(1‐oxidopyridin‐2‐yl)methyl]‐1,4,7,10‐tetraazacyclododecane‐1,7‐diacetic acid= L1 ) containing two acetate and two 2‐methylpyridine N‐oxide arms anchored on the nitrogen atoms of the cyclen platform, which has been designed for stable complexation of lanthanide(III) ions in aqueous solution. Relaxometric studies suggest that the thermodynamic stability and kinetic inertness of the Gd^III complex may be sufficient for biological applications. A detailed structural study of the complexes by ¹H NMR spectroscopy and DFT calculations indicates that they adopt an anti‐Δ(λλλλ) conformation in aqueous solution, that is, an anti‐square antiprismatic (anti‐SAP) isomeric form, as demonstrated by analysis of the ¹H NMR paramagnetic shifts induced by Yb^III. The water‐exchange rate of the Gd^III complex is ${k{{298\hfill \atop {\rm ex}\hfill}}}$ =6.7×10⁶ s^?1, about a quarter of that for the mono‐oxidopyridine analogue, but still about 50 % higher than the ${k{{298\hfill \atop {\rm ex}\hfill}}}$ of GdDOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The 2‐methylpyridine N‐oxide chromophores can be used to sensitize a wide range of Ln^III ions emitting in both the visible (Eu^III and Tb^III) and NIR (Pr^III, Nd^III, Ho^III, Yb^III) spectral regions. The emission quantum yield determined for the Yb^III complex (${Q{{{\rm L}\hfill \atop {\rm Yb}\hfill}}}$ =7.3(1)×10^?3) is among the highest ever reported for complexes of this metal ion in aqueous solution. The sensitization ability of the ligand, together with the spectroscopic and relaxometric properties of its complexes, constitute a useful step forward on the way to efficient dual probes for optical imaging (OI) and MRI.     

Anti-inflammatory and Antinociceptive Activity of Chitin-binding Lectin from Canna Limbata Seeds

Lectins are a structurally heterogeneous group of proteins or glycoproteins with at least one noncatalytic domain binding reversibly to a specific mono- or oligosaccharide. Monocot mannose-binding lectins are an extended superfamily of structurally and evolutionarily related proteins. In this study, we evaluated anti-inflammatory and antinociceptive effects of monocot lectin from the Canna limbata seeds (CLL). To accomplish this, CLL was purified and subjected to pharmacological assays: abdominal writhing induced by acetic acid, formalin, hot plate and Zymosan A-induced peritonitis tests. The CLL was purified by chromatographic chitin column, and the relative mass of 21 kDa observed in electrophoresis was confirmed by electrospray mass spectrometry, which also revealed that purified CLL consists of a dimer having a weight of 49,676 Da. The CLL showed nociceptive activity in the acetic acid test as well as peripheral antinociceptive response. The CLL also showed anti-inflammatory effect with the reduction of inflammation in the formalin test and neutrophil migration into the peritoneal cavity. This is the first report of anti-inflammatory activity for a monocot lectin, and it suggests a new pharmacological tool to understand inflammatory and antinociceptive processes mediated through lectins.     

Shear‐induced lamellar phase of an ionic liquid crystal at room temperature

The phase behaviour of a number of N‐alkylimidazolium salts was studied using polarizing optical microscopy, differential scanning calorimetry and X‐ray diffraction. Two of these compounds exhibit lamellar mesophases at temperatures above 50°C. In these systems, the liquid crystalline behaviour may be induced at room temperature by shear. Sheared films of these materials, observed between crossed polarisers, have a morphology that is typical of (wet) liquid foams: they partition into dark domains separated by brighter (birefringent) walls, which are approximately arcs of circle and meet at “Plateau borders” with three or more sides. Where walls meet three at a time, they do so at approximately 120° angles. These patterns coarsen with time and both T1 and T2 processes have been observed, as in foams. The time evolution of domains is also consistent with von Neumann's law. We conjecture that the bright walls are regions of high concentration of defects produced by shear, and that the system is dominated by the interfacial tension between these walls and the uniform domains. The control of self‐organised monodomains, as observed in these systems, is expected to play an important role in potential applications.     

Synthesis and application of a peroxidase-like molecularly imprinted polymer based on hemin for selective determination of serotonin in blood serum

This work reports the preparation of a molecularly imprinted polymer (MIP) for selective catalytic detection of serotonin (5-hydroxytryptamine, 5-HT). The process is based on the synthesis of polymers with hemin introduced as the catalytic center to mimic the active site of peroxidase. The copolymer MIP, containing artificial recognition sites for 5-HT, has been prepared by bulk polymerization using methacrylic acid (MAA) and hemin as the functional monomers, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. For the determination of 5-HT, a flow injection analysis system coupled to an amperometric detector was optimized using multivariate analysis. The effects of different parameters, such as pH, buffer flow rate, buffer nature, peroxide concentration and sample volume were evaluated. After optimizing the experimental conditions, a linear response range from 1.0 up to 1000.0 μmol L⁻¹ was obtained with a sensitivity of 0.4 nA/μmol L⁻¹. The detection limit was found to be 0.30 μmol L⁻¹, while the precision values (n = 6) evaluated by relative standard deviation (R.S.D.) were, respectively, 1.3 and 1.7% for solutions of 50 and 750 μmol L⁻¹ of 5-HT. No interference was observed by structurally similar compounds (including epinephrine, dopamine and norepinephrine), thus validating the good performance of the imprinted polymer. The method was applied for the determination of 5-HT in spiked blood serum samples.     

Cellulosic Films Obtained from the Treatment of Sugarcane Bagasse Fibers with N-methylmorpholine-N-oxide (NMMO)

Ethanol/water organosolv pulping was used to obtain sugarcane bagasse pulp that was bleached with sodium chlorite. This bleached pulp was used to obtain cellulosic films that were further evaluated by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). A good film formation was observed when temperature of 74 °C and baths of distilled water were used, which after FTIR, TGA, and SEM analysis indicated no significant difference between the reaction times. The results showed this to be an interesting and promising process, combining the prerequisites for a more efficient utilization of agro-industrial residues.     

Diterpenes from the Brown Alga Dictyota crenulata

The crude extract of the Brazilian brown alga Dictyota crenulata was analyzed by NMR spectroscopy and HRGC-MS techniques. Seven diterpenes were identified: pachydictyol A, dictyodial, 4beta-hydroxydictyodial A, 4beta-acetoxydictyodial A, isopachydictyol A, dictyol C and dictyotadiol. Xeniane diterpenes have previously been found in D. crenulata from the Pacific Ocean. The results characterize D. crenulata as a species that provides prenylated guaiane (group I) and xeniane diterpenes (group III), thus making it a new source of potential antiviral products.     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

On the role of leptonic CPV phases in cLFV observables

The European Physical Journal C - We argue that high-quality data on the reaction $$e^+e^-\rightarrow \pi ^+\pi ^-\eta $$ will allow one to determine the doubly-virtual form factor $$\eta...     

A study of the firing temperature of archeological pottery by X-ray diffraction and electron paramagnetic resonance

A fragment of an archeological funerary urn from Campos dos Goytacazes, Brazil, was studied using electron paramagnetic resonance (EPR) and X-ray diffraction (XRD). The thermal stability of all paramagnetic species was studied with isothermal treatment. In the present study, the iron signal (Fe³⁺) cannot be used as a firing temperature reference for archeological pottery. The intensification of this signal with temperature is a consequence of Fe²⁺ oxidation, but this reaction occurs in a short-lived treatment at high temperature or in an extended treatment at lower temperature. However, the iron signal and three other paramagnetic species indicate that the urn was fired for an extended time (up to three days). The thermal stability of the three paramagnetic species indicates a firing temperature of around 500 °C in the inner layer, between 400 and 500 °C in the middle layer, and between 500 and 800 °C in the outer layer. The presence of kaolinite structures only in the middle portion is consistent with the temperature values estimated. A firing method for the funerary archeological urn is suggested.