Determination of lead in seawater by inductively coupled plasma optical emission spectrometry after separation and pre-concentration with cocrystallized naphthalene alizarin

An analytical method for separation and pre-concentration of lead in seawater for determination by inductively coupled plasma optical emission spectrometry has been investigated. Lead was retained in the solid phase (0.5 g) composed of co-precipitated naphthalene and alizarin red. The solid phase quantitatively sorbs Pb(II) at pH 8–9, and the metal was eluted using 5.0 ml of 2 mol l⁻¹ nitric acid. The effect of NaCl, KCl, BaCl₂, CaCl₂, Na₂SO₄, MgCl₂ and Na₃PO₄ on the sorption of Pb(II) in the solid phase was studied. A set of solutions containing varying amounts of electrolytes (0.5; 1.0; 3.0 and 5.0% m/v) with Pb (50 μg) was prepared and the recommended procedure applied. The Na₃PO₄ was found to interfere; the other electrolytes did not interfere up to 5% m/v. A pre-concentration factor of 40 was obtained in this analytical procedure. The limit of detection and limit of quantification for Pb(II) were 53 and 176 μg l⁻¹, respectively. Lead was determined in seawater samples collected in Salvador city, Bahia, Brazil. The precision, expressed as R.S.D., was 1.8–4.6%, and the recovery of lead added to seawater samples was 95–97%.     

Selective Sulfenylative Desulfonylation or Decarbalkoxylation of α-Sulfonyl Malonates with DABCO or Bu3N: Reactivity and Conformational Analysis

The study on reactivity of several α-substituted α-sulfonyl malonates toward 1,4-diazabicyclo[2.2.2]octane (DABCO) and Bu₃N is described. The reactivity with DABCO revealed the possible competition between decarbalkoxylation and unexpected desulfonylation, depending on the α-substituent, because of sterical hindrance around the electrophilic centers (SO₂ and CO₂R). The derivatives with crowded α-substituents suffer selective desulfonylation, and a novel and efficient desulfonylation method can be proposed. The dependence of the reactivity of α-sulfonyl malonates on the sterical hindrance around the electrophilic centers is confirmed by conformational analysis (Macromodel/MM2? and Mopac/MP3). The carbanionic mechanism is proved because the corresponding protonated, deuterated, and sulfenylated products were obtained by addition of the corresponding electrophilic agents. Bu₃N showed itself to be a novel selective decarbalkoxylation agent for any α-substituted α-sulfonyl malonate.     

Disclosure of the imidazolium cation coordination and stabilization mode in ionic liquid stabilized gold(0) nanoparticles

A surface-enhanced Raman spectroscopy (SERS) study of imidazolium ionic liquid stabilized gold(0) nanoparticles (GNPs) furnished previously unknown knowledge about the coordination and stabilization mode of the imidazolium cation. GNPs were prepared by hydrazine reduction of a chloroauric acid solution in 1-triethylene glycol monomethyl ether-3-methylimidazolium methanesulfonate 2 as ether-functionalized room-temperature ionic liquid (RTIL). UV-vis spectroscopy showed the presence of GNP aggregates as absorptions extended to the NIR region. A parallel coordination mode for the imidazolium cation of RTIL 2 on the GNP surface was observed by SERS, which occurred without the simultaneous coordination of the 1-triethylene glycol monomethyl ether-functionality. Instead of this, the ether-functionality was directed away from the GNP surface and acted as steric barrier between the GNPs/GNP aggregates, thus preventing further aggregation. These new insights suggest that the imidazolium cation is responsible for electrosteric stabilization.     

Multifunctional natural fibers: the potential of core shell MgO–SiO2 nanoparticles

Cellulose - Core–shell nanoparticles (NPs) based on metal oxides, namely magnesium oxide (MgO) and silica (SiO2), are a fantastic alternative for natural fibers’ functionalization. In...     

Carbon Nanotube Based Sensor for Simultaneous Determination of Acetaminophen and Ascorbic Acid Exploiting Multiple Response Optimization and Measures in the Presence of Surfactant

A simple procedure for the simultaneous determination of acetaminophen (AC) and ascorbic acid (AA) by differential pulse voltammetry (DPV) using a carbon nanotube paste electrode exploiting measures in cetylpyridinium bromide (CPB) medium is described. Under the best instrumental parameters of DPV, optimized by means of factorial design, the calibration plots in the range 100.0–700.0 µmol L^?1 (r=0.993) and 39.4–146.3 µmol L^?1 (r=0.995) with limits of detection of 7.1 and 2.1 µmol L^?1, were achieved for AA and AC, respectively. The developed method was successfully applied for the AC and AA determination in pharmaceutical formulations, whose accuracy was attested by comparison with HPLC method.     

A Bis(pyridine N‐oxide) Analogue of DOTA: Relaxometric Properties of the GdIII Complex and Efficient Sensitization of Visible and NIR‐Emitting Lanthanide(III) Cations Including PrIII and HoIII

We report the synthesis of a cyclen‐based ligand (4,10‐bis[(1‐oxidopyridin‐2‐yl)methyl]‐1,4,7,10‐tetraazacyclododecane‐1,7‐diacetic acid= L1 ) containing two acetate and two 2‐methylpyridine N‐oxide arms anchored on the nitrogen atoms of the cyclen platform, which has been designed for stable complexation of lanthanide(III) ions in aqueous solution. Relaxometric studies suggest that the thermodynamic stability and kinetic inertness of the Gd^III complex may be sufficient for biological applications. A detailed structural study of the complexes by ¹H NMR spectroscopy and DFT calculations indicates that they adopt an anti‐Δ(λλλλ) conformation in aqueous solution, that is, an anti‐square antiprismatic (anti‐SAP) isomeric form, as demonstrated by analysis of the ¹H NMR paramagnetic shifts induced by Yb^III. The water‐exchange rate of the Gd^III complex is ${k{{298\hfill \atop {\rm ex}\hfill}}}$ =6.7×10⁶ s^?1, about a quarter of that for the mono‐oxidopyridine analogue, but still about 50 % higher than the ${k{{298\hfill \atop {\rm ex}\hfill}}}$ of GdDOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The 2‐methylpyridine N‐oxide chromophores can be used to sensitize a wide range of Ln^III ions emitting in both the visible (Eu^III and Tb^III) and NIR (Pr^III, Nd^III, Ho^III, Yb^III) spectral regions. The emission quantum yield determined for the Yb^III complex (${Q{{{\rm L}\hfill \atop {\rm Yb}\hfill}}}$ =7.3(1)×10^?3) is among the highest ever reported for complexes of this metal ion in aqueous solution. The sensitization ability of the ligand, together with the spectroscopic and relaxometric properties of its complexes, constitute a useful step forward on the way to efficient dual probes for optical imaging (OI) and MRI.     

Entropically Driven Self‐Assembly of Lysinibacillus sphaericus S‐Layer Proteins Analyzed Under Various Environmental Conditions

S‐Layer proteins are an example of bionanostructures that can be exploited in nanofabrication. In addition to their ordered structure, the ability to self‐assembly is a key feature that makes them a promising technological tool. Here, in vitro self‐assembly kinetics of SpbA was investigated, and found that it occurs at a rate that is dependent on temperature, its concentration, and the concentration of calcium ions and sodium chloride. The activation enthalpy (120.81 kJ · mol^?1) and entropy (129.34 J · mol^?1 · K^?1) obtained infers that the incorporation of monomers incurs in a net loss of hydrophobic surface. By understanding how the protein monomers drive the self‐assembly at different conditions, the rational optimization of this process was feasible.

     

Chromotropic acid-functionalized polyurethane foam: A new sorbent for on-line preconcentration and determination of cobalt and nickel in lettuce samples

A chromotropic acid-functionalized polyurethane foam has been developed for use in an on-line preconcentration system for cobalt and nickel determination. The packing material was prepared by covalent coupling of chromotropic acid with the polyurethane foam through an azo group. Co and Ni ions were sorbed in the mini-column, from which they could be eluted directly to the nebulizer-burner system of a flame atomic absorption spectrometer. Elution of cobalt and nickel from the mini-column can be accomplished with 0.50 and 0.75 M HCl solutions, respectively. The enrichment factors obtained were 22 (Co) and 27 (Ni), for 60 s preconcentration time, and 57 (Co) and 59 (Ni), if a preconcentration time of 180 s was used. Under the optimum conditions, the proposed procedure allowed the determination of metals with detection limits of 0.43 (cobalt) and 0.52 microg/L (nickel), respectively, on using preconcentration periods of 180 s. The accuracy of the developed procedure was evaluated by analysis of the certified reference materials NIST 1515 Apple Leaves and NIST 1570a Spinach Leaves. The method was applied to the analysis of lettuce samples. The contents of cobalt in the samples analyzed varied from 0.75 to 0.98 microg/g. Nickel was not detected in the lettuce samples.     

Influence of trace elements supplementation on the production of recombinant frutalin by Pichia pastoris KM71H in fed-batch process

Frutalin, a galactose-specific lectin used to detect specific tumour markers, is a protein with low expression level in breadfruit. In the present study, fed-batch fermentation in a stirred tank bioreactor was used as a strategy to enhance protein production by a recombinant Pichia pastoris KM71H. By using this process, the production of recombinant frutalin was 4-fold higher than the value obtained in shaker flasks batch assays. Supplementation of the fermentation medium with trace elements (Pichia trace minerals, PTM) was also evaluated in order to stimulate production of the recombinant protein. The addition of PTM to the minimum medium afforded a recombinant protein production of 13.4 mg L^?1, which was 2.5-fold higher than that achieved from the culture medium without PTM supplementation. These results are significant as the development of strategies to improve the production of recombinant frutalin may broaden its application in cancer diagnosis.