Mössbauer effect of iodine at pressures to 30 GPa

We report the first high pressure¹²⁹I Mössbauer measurements with elemental iodine at pressures to 30 GPa. A 20 mg/cm^{2 129}I₂ absorber was mounted in a diamond anvil cell with an effective diameter of 0.21 mm. The source used was Mg₃ ^129mTeO₆. Experiments were performed mainly at 4 K and the pressure was monitored by the ruby fluorescence method. With increasing pressure we observe a gradual decrease in ¦e²qQ¦ and an increase in IS and values of the low pressure, molecular phase; at 16 GPa a new phase (HP1) is detected characterized by a change in sign of e²qQ and a smaller value of ¦e²qQ¦, and a substantial increase in . At 24 GPa a new phase (HP2) is formed that is characterized by a smaller value of . In general the population of the molecular phase decreases from 1.0 near 15 GPa to a value of 0.4 at 30 GPa. The fraction of the high pressure phase (HP1 + HP2) increases at the expense of the molecular phase and that of the HP2 at the expense of the HP1 phase. These observations are discussed in relation to the onset of a metallic phase near 16 GPa and recent x-ray diffraction studies.Work performed under the auspices of the U.S. Department of Energy.     

Probe metal binding mode of imine covalent organic frameworks: cycloiridation for (photo)catalytic hydrogen evolution from formate

Metalation of covalent organic frameworks (COFs) is a critical strategy to functionalize COFs for advanced applications yet largely relies on the pre-installed specific metal docking sites in the network, such as porphyrin, salen, 2,2′-bipyridine, etc. We show in this study that the imine linkage of simple imine-based COFs, one of the most popular COFs, readily chelate transition metal (Ir in this work) via cyclometalation, which has not been explored before. The iridacycle decorated COF exhibited more than 10-fold efficiency enhancement in (photo)catalytic hydrogen evolution from aqueous formate solution than its molecular counterpart under mild conditions. This work will inspire more functional cyclometallated COFs to be explored beyond catalysis considering the large imine COF library and the rich metallacycle chemistry.

This study describes cyclometallation as a new metal binding mode for imine-based COFs. The iridacycle decorated COF could be used for catalytic hydrogen evolution from aqueous formate solution with high stability and high efficacy.     

Treatment of cutaneous T cell lymphoma with extracorporeal photopheresis induces Fas-ligand expression on treated T cells,but does not suppress the expression of co-stimulatory molecules on monocytes

Following extracorporeal photopheresis (ECP), lymphocytes become apoptotic and upregulate class I MHC antigenic peptides. Conversely, ECP treated monocytes demonstrate activation markers and have an increased avidity for the phagocytosis of apoptotic T cells. Processing of apoptotic T cells by monocytes, following ECP, is thought to induce an immunomodulatory response, which targets untreated, but clonal T cells. Recently we detected apoptotic lymphocytes immediately post ECP. Although enhanced CD95 (Fas) expression has been observed 24 h post ECP, CD95 and Fas-ligand (Fas-L) expression have not been determined at this very early apoptotic stage. Exposure of monocytes to UV has previously suppressed expression of the co-stimulatory molecules required for the presentation of processed antigens to T cells. Our data demonstrate no increase in CD95 or Fas-L expression on T cells tested immediately following ECP. However, the number of T cells expressing Fas-L significantly increased 24 h post ECP (P<0.005). The expression of the co-stimulatory molecules, CD54, CD80 and CD86, remained unaltered on monocytes treated by ECP. Although the mechanism responsible for early induction of lymphocyte apoptosis remains unclear, the later apoptosis involves Fas-L expression. The maintenance of co-stimulatory molecules, on treated monocytes, indicates that they retain the ability to induce an immunomodulatory response.     

Acid digestion of geological and environmental samples using open-vessel focused microwave digestion

The application of open vessel focused microwave acid digestion is described for the preparation of geological and environmental samples for analysis using inductively coupled plasma-mass spectrometry (ICP-MS). The method is compared to conventional closed-vessel high pressure methods which are limited in the use of HF to break down silicates. Open-vessel acid digestion more conveniently enables the use of HF to remove Si from geological and plant samples as volatile SiF4, as well as evaporation-to-dryness and sequential acid addition during the procedure. Rock reference materials (G-2 granite, MRG-1 gabbros, SY-2 syenite, JA-1 andesite, and JB-2 and SRM-688 basalts) and plant reference materials (BCR and IAEA lichens, peach leaves, apple leaves, Durham wheat flour, and pine needles) were digested with results comparable to conventional hotplate digestion. The microwave digestion method gave poor results for granitic samples containing refractory minerals, however fusion was the preferred method of preparation for these samples. Sample preparation time was reduced from several days, using conventional hotplate digestion method, to one hour per sample using our microwave method.     

High-performance liquid chromatographic determination of benzodiazepines in human plasma

A simple and sensitive method for determination of benzodiazepines in plasma has been developed using high-performance liquid chromatography in a reverse-phase mode. The method is illustrated by application to plasma samples containing diazepam and N-desmethyldiazepam at concentrations which would be encountered during therapy, with limits of detection of 10 ng/ml and 2 ng/ml for diazepam and N-desmethyldiazepam, respectively.     

Effect of ionic additives on the elution of sodium aryl sulfonates in supercritical fluid chromatography

Addition of a small amount of polar solvent (i.e., modifier) to CO2 in packed column supercritical fluid chromatography (SFC) has shown major improvements in both polar analyte solubility and interaction of the polar analyte with the stationary phase. Recently, the addition of an ionic component (i.e., additive) to the primary modifier by one of us has been shown to extend even further the application of SFC to polar analytes. In this work, the effect of various ionic additives on the elution of ionic compounds, such as sodium 4-dodecylbenzene sulfonate and sodium 4-octylbenene sulfonate, has been studied. The additives were lithium acetate, ammonium acetate, tetramethylammonium acetate, tetrabutylammonium acetate, and ammonium chloride dissolved in methanol. Three stationary phases with different degrees of deactivation were considered: conventional cyanopropyl, deltabond cyanopropyl, and bare silica. The effect of additive concentration and additive functionality on analyte retention was investigated. Sodium 4-dodecylbenzene sulfonate was successfully eluted using all the additives with good peak shape under isocratic/isobaric/isothermal conditions. Different additives, however, yielded different retention times and in some cases different peak shapes.     

Femtosecond study of Cu(H(2)O) dynamics

The short-time nuclear dynamics of Cu(H(2)O) is investigated using femtosecond photodetachment-photoionization spectroscopy and time-dependent quantum wave packet calculations. The Cu(H(2)O) dynamics is initiated in the electronic ground state of the complex by electron photodetachment from the Cu(-)(H(2)O) complex, where hydrogen atoms are oriented toward Cu. Several time-resolved resonant multiphoton ionization schemes are used to probe the ensuing reorientation and dissociation. Immediately following photodetachment, the neutral complex is far from its minimum energy geometry and possesses an internal energy comparable to the Cu-H(2)O dissociation energy and undergoes both large-amplitude H(2)O motion and dissociation. Dissociation is observed to occur on three distinct time scales: 0.6, 8, and 100 ps. These results are compared to the results of time-dependent J=0 wave packet calculations, propagating the initial anion vibrational wave functions on the ground-state potential of the neutral complex. An excellent agreement is obtained between the experimental results and the ionization signals derived from the calculated probability amplitudes. Related experiments and calculations are carried out on the Cu(D(2)O) complex, with results very similar to those of Cu(H(2)O).     

Novel binding of beryllium to dicarboxyimidazole-based model compounds and polymers

The ligand 4,5-dicarboxyimidazole (H(2)DCI) and its methyl derivative 1-methyl-4,5-dicarboxyimidazole (H(2)MDCI) have been shown to bind to Be(II) forming a zwitterionic species that has been structurally characterized. A new dicarboxyimidazole-based polymer has been prepared and its Be-binding properties have been studied using NMR ((1)H and (9)Be) and fluorescence spectroscopy; it represents a rare example of beryllium binding to a polymer. Models of the mononuclear and polymeric Be(II)-binding sites have been studied using density functional theory (DFT), and the (9)Be NMR chemical shifts of these model materials have been calculated for the purpose of direct comparison to experimentally observed values. Differences in the binding modes of the mononuclear and polymeric species are discussed.     

Preparation of quinoxalines, dihydropyrazines, pyrazines and piperazines using tandem oxidation processes

Alpha-hydroxyketones undergo MnO2-mediated oxidation followed by in situ trapping with aromatic or aliphatic 1,2-diamines to give quinoxalines or dihydropyrazines, respectively, in a one pot procedure which avoids the need to isolate the highly reactive 1,2-dicarbonyl intermediates. Modifications of the procedure allow the formation of pyrazines and piperazines.