Subpicosecond pulse generation in synchronously pumped and hybrid ring dye lasers

Subpicosecond pulse generation has been examined in synchronously pumped mode-locked ring dye laser systems. These include hybrid and composite absorber/gain media arrangements as well as a simple synchronous cavity. The shortest pulses recorded were 0.3 ps for the hybrid system, and this has been shown to be critically dependent on the positioning of the absorber jet in the centre of the cavity to better than 50 m. Stable operation for subpicosecond pulse generation has been achieved in the ring configuration with greater wavelength tunability and higher average power conversion efficiency than with conventional cavity arrangements.     

Ozone-based sulfur chemiluminescence detection: Its applicability to gas,supercritical fluid,and high performance liquid chromatography

The sensitive detection of sulfur-containing analytes is of interest in many industrial applications; selective detection is also desirable since these compounds are usually present at trace levels in difficult matrixes. The purpose of this article is to review the use of the Sievers® ozone-based sulfur chemiluminescence detector, and its coupling with gas chromatography, supercritical fluid chromatography, and high performance liquid chromatography. Detection limits, linearity, response factors, and selectivity are discussed for each of these techniques. Critical operational parameters for the SCD are also described. The use of other sulfur selective detectors for SFC and HPLC is also briefly summarized.     

Optimization of the extraction and fractionation of corn bran oil using analytical supercritical fluid instrumentation

Supercritical fluid extraction (SFE) is combined with supercritical fluid chromatography (SFC) in an analytical mode to develop a system for fractionating and enriching high value ferulate-phytosterol esters (FPE) contained in corn bran oil. Corn bran is initially extracted with neat supercritical carbon dioxide (SC-CO2) at various pressures (13.8, 34.5, and 69 MPa) and temperatures (40, 60, and 80 degrees C) to see if the FPE can be enriched in the extracts. These initial studies show the greatest percentage of FPE could be extracted under two sets of conditions: 69 MPa at 80 degrees C and 34.5 MPa at 40 degrees C. Both sets of parameters yield an extract containing approximately 1.25% FPE. A stock supply of corn bran oil is then produced by scaled-up SFE at 34.5 MPa and 40 degrees C for subsequent chromatographic fractionation. The SFE-obtained corn bran oil is then applied to the head of a minichromatographic column containing an amino-propyl sorbent. SFC is than commenced using neat SC-CO2 at 69 MPa and 80 degrees C to remove the majority of the triglyceride-based oil. Pressure and temperature are then lowered to 34.5 MPa and 40 degrees C, respectively, and ethanol is added as a modifier. The modifier is added in an increasing stepwise gradient program, and fractions are collected at equal volume intervals. The resultant fractions are analyzed by analytical high-performance liquid chromatography with evaporative light-scattering detection and show that FPE could be enriched to a 14.5% (w) level.     

Molecular recognition for stable organic radicals--2-(6-uradinyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-1-oxyl

Stable radical 2-(6-uradinyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-1-oxyl shows antiferromagnetic spin pairing with 2J/k= -14 K, attributable to a close contact between unpaired spin density on the imidazole-type nitrogen atoms; hydrogen bonds aid dimer formation, but do not appear to play an eletronic role in the magnetic behaviour.     

High accuracy analysis by isotope dilution mass spectrometry using an iterative exact matching technique

The selection of an appropriate isotope dilution mass spectrometry technique for the practical application of this potentially primary method of analysis is highly important. The NARL approach for the application of the exact matching double isotope dilution mass spectrometry technique developed by Henrion is presented. NARL's approach utilises exact matching to minimise the effect of measurement biases within the method but also includes the thorough examination of all other biasing factors. The approach has been successfully tested in international CCQM intercomparisons with other national metrology institutes.     

Evaluation of NMR spectroscopy for the quantitative characterization of urea-formaldehyde resins

A comparative evaluation has been made of both proton and (13)C nuclear magnetic resonance techniques in the quantitative characterization of commercial urea-formaldehyde resins. There is good agreement between data derived from (13)C NMR spectra and from (1)H high-field continuous wave, or low-field (Fourier transform) NMR spectra. Low-field continuous wave proton spectra exhibit inferior resolution and provide inaccurate quantitative data. Combination of (13)C and proton NMR with nitrogen analysis gives a quantitative characterization technique for these resins.     

Synthesis of a μ4-PPh mixed metal cluster: the x-ray structures of [Ru3Rh2(CO)13(PEt3)(μ4-PPh)] and [Ru3Au(μ2-H)(CO)9(PMe2Ph)(μ3-PPh)]

The synthesis of a (μ₄-PPh) and some related (μ₃-PPh) mixed metal clusters containing ruthenium is described together with the X-ray structures of [Ru₃Rh₂(CO)₁₃(PEt₃)(μ₄-PPh)] and [Ru₃Au(μ₂-H)(CO)₉(PMe₂Ph)(μ₃-PPh)].     

Stability studies and purification procedure for nitrite solutions in view of the preparation of isotopic reference materials

The lack of reference materials, accurately certified for nitrite, is a problem in view of the importance of this species for environmental and medical reasons. This work outlines a plan for the preparation of nitrite isotopic reference materials (IRMs) in the form of high purity solutions, certified for their nitrite-nitrogen isotopic composition and nitrite concentration. To achieve the desired accuracy (expanded uncertainty U with a coverage factor k=2 of 相似文献   

Modes of decomposition of silver,lead and mercuric toluenedithiolates. A synthetic and analytical study

The silver, lead and mercuric toluenedithiolates were synthesised and analysed by both conventional chemical methods and thermoanalytical methods. The thermal decomposition was studied by thermogravimetric analysis in air, nitrogen and vacuum. The formulae of the decomposition products were derived using the mole weights and i.r. absorption spectra. The activation energies for the first stage of decomposition were calculated. The volatile products contain mostly carbon and hydrogen while the residues contain the corresponding metals either free or combined with sulfur.

---

Zusammenfassung Die Silber-, Blei- und Quecksilber-Toluoldithionate wurden synthetisiert und sowohl mit konventionellen chemischen Methoden als auch thermoanalytisch analysiert. Die thermische Zersetzung wurde durch thermogravimetrische Analyse in Luft, Stickstoff und Vakuum untersucht. Die Formeln der Zersetzungsprodukte wurden aus den Molekulargewichten und den Infrarot-Absorptionsspektren abgeleitet. Die Aktivierungsenergien für den ersten Zersetzungsschritt wurden berechnet. Die flüchtigen Produkte enthalten hauptsächlich Kohlenstoff und Wasserstoff, während die Rückstände die entsprechenden Metalle in freier Form oder in Form von Schwefelverbindungen enthalten.

---

, . . , . . , .

---

---

Abstracted in part from a thesis submitted by T. Ktenas to the Graduate School of Howard University, in partial fulfillment of the requirements for the degree of Master of Science.     

Elution of Cationic Species with/without Ion Pair Reagents from Polar Stationary Phases via SFC

Traditionally, the application of supercritical fluid chromatography has been limited to compounds of relatively low polarity. Thus, we report here that one secondary amine and two quaternary amine salts were successfully eluted from a Deltabond Cyano-bonded silica column with the addition of sodium alkylsulfonate to the methanol-modified, carbon dioxide-based mobile phase. A possible ion-pairing interaction between the positively charged analytes and the anionic part of the sulfonate additive has been proposed. In another set of experiments, the three amine salts readily eluted from both Ethyl-pyridine-bonded silica and Amino-bonded silica phases without the need of additive although the peak shapes were less than desirable. The addition of sulfonate salt to the mobile phase again sharpened the peaks. In the presence of a mixture of methanol and CO₂, we suggest that these stationary phases are positively charged. We describe here also for the first time the employment of a strong silica-based anion exchange (SAX) column for supercritical fluid separation of cationic species. Two elution mechanisms were proposed for the three amine salts depending upon whether the ionic additive was incorporated into the mobile phase. Separation as the ion-pair was proposed with an ionic additive in the mobile phase; whereas separation of the intact amine salt from the positively charged basic stationary phases was suggested to be operational without the ionic additive.