Micro-humps formed in excimer laser ablation of polyimide using mask projection system

In this paper we report the results of an investigation into surface deformation caused by thermal effects during excimer laser ablation of polyimide. Obvious surface deformation around hole entrances was observed during the experiment. The surface topology and cross section of the ablated holes were analyzed using topography measurement tool and scanning electron microscopy. It was shown that a micro-hump of 17 to 150 nm in height and 1 to 3 μm in width was formed above the level of the unablated surface. The deformed surface showed rough and color-changed characteristics. An optical diffraction model was employed to explain the cause of this kind of deformation. It was found that the ablating and heating by a near- and under-threshold laser beam became a thermal effect in polyimide material ablation, which was contributed to by a diffraction effect of the optical projection system. Received: 9 October 2001 / Accepted: 17 October 2001 / Published online: 23 January 2002     

Deformation and profile measurement using the digital projection grating method

This paper presents a digital projection grating method for full field measurement of out-of-plane deformation and shape of an object. Two grating patterns on an object before and after deformation are captured by a CCD camera and stored in a computer. With the aid of Fast Fourier Transform (FFT) and signal demodulating techniques, a wrapped phase map is generated. The phases are expanded in the range of 0–2π and compared with the resulting moiré pattern. An unwrapping procedure is used to obtain a continuous phase. In addition, a digital method for fractional fringe multiplication is also developed. Results on deformation and object profile measurements are presented.     

Time delay and integration imaging for internal profile inspection

A time delay and integration imaging technique is presented and applied to internal surface contour measurement. Using the proposed optical arrangement, inspection of profiles of objects which are mounted on the internal surface of a hollow cylinder can be carried out. Tests conducted on objects with diameters ranging from 40 to 214 mm show good agreement with results obtained from conventional profilometer.     

Effect of the combined thermal and mass concentration gradients on the stability of a chemically reacting fluid in a porous medium

Summary The onset of instability, due to the combined effects of thermal and mass concentration gradients, is investigated in the hydrodynamic stability regime. It is found that the critical Rayleigh number, which determines the onset of instability, increases as the chemical reaction rate constant increases hyperbolically over a wide range of values at both moderate and high permeabilities. In addition, the instability grows with increase in porosity. Previous results show that the critical Rayleigh number rises linearly when only the mass concentration gradient is considered.     

Determination of oestriol in pregnancy urine by normal-phase high-performance liquid chromatography with electrochemical detection

A method for the determination of oestriol in pregnancy urine by normal-phase high-performance liquid chromatography with electrochemical detection is described. A large-volume wall-jet cell with an Ag-Ag+ reference electrode was used as the detector system. The limit of detection obtained is comparable to that of electrochemical detection following reversed-phase liquid chromatography. One of the advantages of electrochemical detection with normal-phase systems is that adsorption problems are minimized.     

Effect of operating variables on rejection of indium using nanofiltration membranes

Indium and its compounds exhibit excellent semiconductor properties however they are suspected carcinogenic to human beings. For the first time, we applied nanofiltration (NF) technology to the separation of indium from a synthetic wastewater as a literature review revealed little information on the treatment of such a waste. In this research, three types of nanofiltration membranes, NTR7450, ES10 and ES10C, were employed to compare their performances under various operating conditions. With increasing indium concentration in the feed solution, the rejection rates decreased in all the membranes, which could be ascribed to concentration polarization and ion-shielding effects. The changes of indium concentration in the permeate (C_p) were then correlated to the concentration factor (CF) during nanofiltration of the feed solution. The experimental results were well predicted by the theoretical analysis. Increase of operating pressure enhanced their rejection rates of indium, which might be attributed to the “dilute effect”. The real rejection (f_r) of indium by nanofiltration was found permeate flux dependent. Based on the results obtained, the nanofiltration mechanisms of multivalent cations such as In³⁺ were delineated and discussed. It was found that most of the models developed from nanofiltration of univalent and divalent cations were still valid for the nanofiltration process of trivalent cations. However, the strong chemical potential of trivalent cations to form complexes in the solution around neutral pH exerted a significant impact on indium rejection rates of the NF membranes. The experimental results suggest a stable performance of nanofiltration when applied to the semiconductor wastewater, however, acidic conditions should be avoided.     

Reactive coupling of 4-vinylaniline with hydrogen-terminated Si(100) surfaces for electroless metal and "synthetic metal" deposition

Pristine and resist-patterned Si(100) substrates were etched by aqueous HF to produce hydrogen-terminated silicon (H-Si(100)) surfaces. The H-Si(100) surface was then subjected to UV-induced reactive coupling of 4-vinylaniline (VAn) to produce the VAn monolayer-modified silicon (VAn-Si) surface. The VAn-Si surface was first functionalized with a "synthetic metal" by oxidative graft polymerization of aniline with the aniline moieties of the coupled VAn molecules. The composition and topography of the VAn-Si and polyaniline (PAn)-grafted VAn-Si (PAn-VAn-Si) surfaces were characterized by X-ray photoelectron spectroscopy and atomic force microscopy, respectively. The doping-undoping (protonation-deprotonation) and redox-coupling (metal reduction) behavior, as well as the electrical conductivity, of the surface-grafted PAn were found to be similar to those of the aniline homopolymer. The VAn-Si surface was also funtionalized by the electroless plating of copper. Not only did the VAn layer provide chemisorption sites for the palladium catalyst, in the absence of prior sensitization by SnCl2, during the electroless plating process, it also served as an adhesion promotion layer and a low-temperature diffusion barrier for the electrolessly deposited copper. Finally, micropatterning of the grafted PAn and of the electrolessly deposited copper were demonstrated on the resist-patterned VAn-Si surfaces.     

Palladium(0)-catalyzed cascade one-pot synthesis of isoxazolidines

A highly diastereoselective cascade reaction protocol has been developed for the synthesis of isoxazolidine derivatives utilizing aryl halides, O-homoallyl hydroxylamine and palladium(0) in a one-pot reaction.     

Quantum chemical studies on the tautomerism of some potentially tautomeric aminoindazole derivatives

The aqueous phase AM1, PM3, and PM5 calculation data had indicated that when a potentially tautomeric amino group is placed at 3C position of the indazole ring the ring-chain tautomerism becomes feasible. However, when the amino group is placed at 4–7C of the indazole ring only the annular tautomerism was found to be feasible and no effect of amino group to provoke a ring chain tautomerism was observed. On the other hand amino form of 3 amino substituted indazole was found to be predominant over imino forms whereas for the 4–7 amino substituted indazoles imino forms were found to be predominant over amino forms. The attempt to apply soft–hard base and soft nucleophile–electrophile criteria to protonation and tautomerism phenomena was successful.