Alternating copolymer of thiophene andN‐(phenylethynyl)pyrrole. New π‐conjugated alternating five‐membered ring copolymer and its packing structure

An alternating copolymer, Copoly‐1 , of thiophene and N‐(phenylethynyl)pyrrole was prepared by palladium‐catalyzed polycondensation. Powder X‐ray diffraction (XRD) analysis indicated that Copoly‐1 formed a stacked packing structure with doubly‐running polymer main chains. Optical data support the molecular and packing structures of Copoly‐1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2219–2224, 2005     

Extraction of Catecholamines by Calixarene Carboxylic Acid Derivatives

Extraction behaviors of catecholamines with a series of calixarene carboxylic acid derivatives were investigated. Relatively large calix[6]arene and calix[8]arene extract catecholamines into the organic solution, while smaller calix[4]arene and the monomer analog do not. The calix[6]arene, which has a cavity that fits a protonated amino group well, selectively extracts a primary amino compound dopamine over other catecholamines. Slope analysis and Job’s method confirmed formation of a 1:1 complex between the calix[6]arene and dopamine. On the other hand, the calix[8]arene extracts both dopamine and adrenaline, due to the large cavity for induced-fit recognition. Dopamine extracted with the calixarene is quantitatively stripped by contacting the organic solution with a fresh acidic solution.     

Synthesis and characterization of three novel perfluoro-oligothiophenes ranging in length from the trimer to the pentamer

In this Article, we report on the synthesis and full characterization of three perfluorinated oligothiophenes, ranging in length from the trimer to the pentamer (PF-nT, with n = 3, 4, or 5). The differential pulse voltammetry (DPV) analysis of the compounds showed that they can be both oxidized and reduced (i.e., they display a dual or amphoteric electrochemical behavior), with the reduction peaks positively shifted relative to those of the corresponding unsubstituted oligothiophenes. The electrochemically determined energy gaps are in agreement with those measured from the UV-vis-NIR absorption spectra in solution. The conjugational properties have been investigated by means of FT-Raman spectroscopy, both as pure solids and as dilute solutes in CH(2)Cl(2), revealing that: (i) pi-conjugation does not still reach saturation with chain length for the longest oligomer, and (ii) conformational distortions from a nearly coplanar arrangement of the successive thiophene units upon solution are not too large. DFT and TDDFT quantum chemical calculations have been performed, at the B3LYP/6-31G level, to assess information about the optimized molecular structure, equilibrium atomic charges distribution, energies and topologies of the frontier molecular orbitals (MO) around the gap, vibrational normal modes associated with the most outstanding Raman scatterings, and vertical one-electron excitations that give rise to the main optical absorptions.     

Extraction Behavior of Amino Acids by Calix[6]arene Carboxylic Acid Derivatives

A series of calixarene carboxylic acid derivatives were synthesized for the extraction of amino acids. A calix[6]arene carboxylic acid derivative showed the highest extractability to the target tryptophan ester. The main driving forcefor the complexation was the interaction between the ammonium cation of the aminoacid and the oxygen atoms of the host molecule. Stripping of amino acids was alsoaccomplished by contacting the organic solution with a fresh acidic solution. Basedon slope and Job method analyses, it was confirmed that the calix[6]arene formsa 1 : 1 complex with the amino acid ester. The structure of the complex between the calix[6]arene and the amino acid was investigated by ¹H-NMR and CD spectra. The calix[6]arene includes a guest molecule in the cavity, and the inclusion induces the asymmetrization of the host molecule. This host compound functions as a novel recognition tool for amino acids.     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

2-Oxo-1,3-dioxoles as specific substrates for measurement of arylesterase activity

Various 4-arylthiomethyl-2-oxo-1,3-dioxole derivatives IIIa-o were synthesized. Their hydrolysis rates by arylesterase (EC 3.1.1.2) and cholinesterase (EC 3.1.1.8) in human serum were evaluated. Some of them were not hydrolyzed by cholinesterase, but were hydrolyzed easily by arylesterase. Among the substrates, sodium 4-((5-methyl-2-oxo-1,3-dioxol-4-yl)methylthio)benzenesulfonate (IIIg) was selected for its substrate reactivity toward arylesterase and its good water solubility. In addition, neither aliesterase (EC 3.1.1.1), acetylesterase (EC 3.1.1.6) nor cholesterol esterase (EC 3.1.1.13) hydrolyzed the compound. IIIg is thus concluded to be a specific substrate for arylesterase. Our assay system for serum arylesterase using IIIg can be readily applied to an automatic analyzer in the diagnosis of liver cirrhosis.     

Photochemical study of [3(3)](1,3,5)cyclophane and emission spectral properties of [3n]cyclophanes (n = 2-6)

Thephotochemical reaction of [3(3)](1,3,5)cyclophane 2, which is a photoprecursor for the formation of propella[3(3)]prismane 18, was studied using a sterilizing lamp (254 nm). Upon photolysis in dry and wet CH2Cl2 or MeOH in the presence of 2 mol/L aqueous HCl solution, the cyclophane 2 afforded novel cage compounds comprised of new skeletons, tetracyclo[6.3.1.0.(2,7)0(4,11)]dodeca-5,9-diene 43, hexacyclo[6.4.0.0.(2,6)0.(4,11)0.(5,10)0(9,12)]dodecane 44, and pentacyclo[6.4.0.0.(2,6)0.(4,11)0(5,10)]dodecane 45. All of these products were confirmed by the X-ray structural analyses. A possible mechanism for the formation of these photoproducts via the hexaprismane derivative 18 is proposed. The photophysical properties in the excited state of the [3n]cyclophanes ([3n]CP, n = 2-6) were investigated by measuring the emission spectra and determining the quantum yields and lifetimes of the fluorescence. All [3n]CPs show excimeric fluorescence without a monomeric one. The lifetime of the excimer fluorescence becomes gradually longer with the increasing number of the trimethylene bridges. The [3n]CPs also shows excimeric phosphorescence spectra without vibrational structures for n = 2, 4, and 5, while phosphorescence is absent for n = 3 and 6. With an increase in symmetry of the benzene skeleton in the [3(3)]- and [3(6)]CPs, the probability of the radiation (phosphorescence) process from the lowest triplet state may drastically decrease.     

Higher triplet excited states of benzophenones and bimolecular triplet energy transfer measured by using nanosecond-picosecond two-color/two-laser flash photolysis

The lifetimes of benzophenone in the higher triplet excited state (BP(T(n))) and several BP derivatives in the T(n) states were measured directly to be tau(T(n))=37+/-7 ps and 20-33 ps, respectively, by using the nanosecond-picosecond (ns-ps) two-color/two-laser flash photolysis method. Based on the direct measurements of tau(T(n)) of BP(T(n)), the triplet energy transfer (TET) from BP(T(n)) to quenchers (Q), such as carbon tetrachloride (CCl4), benzene (Bz), and p-dichlorbenzene (DCB), was investigated. The fast TET from BP(T(n)) to Q can be attributed to the lifetime-dependent quenching process, according to the Ware theoretical model of the bimolecular energy transfer reaction. The contribution of the lifetime-dependent term on k(TET) was 27, 60, and 86% for CCl4, Bz, and DCB as the Q of BP(T(n)), respectively, indicating that the TET from BP(T(n)) to Q is influenced not only by tau(T(n)), but also by the size of Q.