Photoinduced chemical reactions on natural single crystals and synthesized crystallites of mercury(II) sulfide in aqueous solution containing naturally occurring amino acids

Photoirradiation at >300 nm of aqueous suspensions of several natural crystal specimens and synthesized crystallites of mercury(II) sulfide (HgS) induced deaminocyclization of optically active or racemic lysine into pipecolinic acid (PCA) under deaerated conditions. This is the first example, to the best of our knowledge, of photoinduced chemical reactions of natural biological compounds over natural minerals. It was found that the natural HgS crystals had activity higher than those of synthesized ones but lower than those of other sulfides of transition metals, e.g., CdS and ZnS, belonging to the same II-IV chalcogenides. In almost all of the photoreactions, decompostion of HgS occurred to liberate hydrogen sulfide (H(2)S) and Hg(2+), and the latter seemed to have undergone in-situ reductive deposition on HgS as Hg(0) after a certain induction period (24-70 h) during the photoirradiation, as indicated by the darkened color of the suspensions. The formation of PCA, presumably through combination of oxidation of lysine and reduction of an intermediate, cyclic Schiff base, could also be seen after a certain induction time of the Hg(0) formation. This was supported by the fact that the addition of small amount of Hg(2+) (0.5 wt % of HgS) increased the PCA yield by almost 2-fold. We also tried to elucidate certain aspects of the plausible stereochemical reactions in relation to the chiral crystal structure of HgS. Although, in some experiments, slight enantiomeric excess of the product PCA was observed, the excess was below or equal to the experimental error and no other supporting analytical data could not be obtained; we cannot conclude the enantiomeric photoproduction of PCA by the natural chiral HgS specimen.     

Simultaneous discrimination of diastereotopic groups and faces: the first example in intramolecular [3+2] and [2+2+1] cycloaddition reactions

To explore a novel concept for controlling diastereoselectivity, systematic studies on the sense and degree of diastereotopic groups and face selections in intramolecular [3 + 2] (nitrile oxide and nitrone) and [2 + 2 + 1] (Pauson-Khand) cycloadditions have been conducted. Optically pure methyl (S)-3,4-O-isopropylidene-3,4-dihydroxybutanoate (5) and methyl (S)-2,3-O-isopropylidene-2,3-dihydroxypropanoate (6) were converted to substrate aldehydes (1-4) that bear geminal allyl groups and four types of controllers with the intention of imparting a stereochemical bias to the allylic groups and their faces. The controllers involve 1,2-bis(tert-butyldimethylsiloxy), 1,3-bis(tert-butyldimethylsiloxy), 1,2-acetonide, and 1,3-acetonide groups, which are referred to as 1,2-(TBDMSO)(2), 1,3-(TBDMSO)(2), 1,3-dioxolane, and 1,3-dioxane, respectively. Twelve runs of cycloaddition reactions as combinations between the three types of reactions and the four types of substrates were performed to provide bicyclo[4.3.0] or -[3.3.0] adducts of synthetic importance in which isoxazolidine, isoxazoline, or cyclopentenone segments were fused. For every case, high levels of diastereoselectivity have been achieved: >99% (in eight cases), 82%, and 76% for the discrimination of diastereotopic groups and 68-->99% for the discrimination of diastereotopic faces. On the basis of the absolute structures of the cycloadducts, plausible stereochemical models are proposed.     

Oxime-based salen-type tetradentate ligands with high stability against imine metathesis reaction

Although salen and its analogues are versatile chelate ligands in inorganic and organometallic chemistry, synthesis of unsymmetrical salen derivatives consisting of two different salicylideneimine moieties is difficult because of the C=N bond recombination. To develop stable analogues of salen-type ligands, we synthesized a series of new ligands salamo (=1,2-bis(salicylideneaminooxy)ethane) on the basis of O-alkyl oxime instead of the imine moiety. Eight salamo ligands 1a-h were prepared in 64-88% yields as colorless crystals from the corresponding salicylaldehydes 2a-h. The crystal structure of 1a-c suggests that the oxime-OH form is more predominant than the keto-NH form. The reaction of 2a-e with excess 1,2-bis(aminooxy)ethane gave monooximes 3a-e in 59-86%, which further reacted with a different salicylaldehyde to afford unsymmetrical salamo ligands 4-8 as stable crystals in 51-70%. No reaction took place when a mixture of salamo derivatives 1a and 1b was treated at 40 degrees C in H2O/MeCN (5:95). However, the metathesis reaction of salen derivatives 9a and 9b completed in 2 h to give a statistical mixture. Monooxime 3b was much more stable than monoimine 11 which is difficult to be isolated. These results indicate the extremely high stability of the salamo derivatives 1 and precursors 3.     

Novel syntheses of 2,3-dihydro-5H-1,4-benzoxathiepins and 1,2,3,5-tetrahydro-4,1-benzothiazepines

2,3-Dihydro-5H-1,4-benzoxathiepins were prepared by intramolecular Friedel-Crafts reactions of ethyl α-[2-(aryloxy)ethylthio]-α-chloroacetates or by acid-catalyzed cyclizations of ethyl α-[2-(aryloxy)ethylsulfinyl]-acetate. 1,2,3,5-Tetrahydro-4,1-benzothiazepines were similarly prepared.     

The influence of polytypic structures on the M011-->M101 solid-solid phase transition of n-C36H74: an application of the oblique infrared transmission method

The molecular displacements on the M011-->M101 phase transition of n-hexatriacontane (n-C36H74) have been investigated with an IR microscope designed for the oblique infrared transmission method. It has been clarified that two polytypic structures of the M011 modification, single-layered structure (Mon) and double-layered one (Orth II), both transform to the M101 modification of single-layered structure with their respective mechanisms. On the M011(Mon)-->M101 transition, the inclination direction of molecular axis is changed by 90 degrees through an intermediate state in which the molecular chain is set perpendicular to the basal plane of the single crystal. On the other hand, a polymorphic-polytypic composite structural change on the M011(Orth II)-->M101 transition is accomplished through two kinds of molecular displacements occurring alternately along the stacking direction of molecular layers.     

Improving the properties of the proton exchange membranes by introducing α-methylstyrene in the pre-irradiation induced graft polymerization

New proton exchange membranes (PEMs) were prepared by pre-irradiation induced grafting of α-methylstyrene (AMS)/styrene (STY)/divinylbenzene (DVB) into the crosslinked polytetrafluoroethylene (RX-PTFE) films and successively sulfonated. The new PEMs showed the improved glass transition temperature and chemical stability as compared with the PEMs prepared by pre-irradiation induced grafting of STY/DVB. The balance of the cost, grafting kinetic, thermal properties and the properties of the resulted proton exchange membrane is the key point of this work.     

Study of thermodynamic stabilities of polytypes of n-C36H74 by solubility measurements and incoherent inelastic neutron scattering

The thermodynamic properties of the two polytypes of n-hexatriacontane (n-C36H74), single-layered structure Mon and double-layered structure Orth II have been investigated by means of solubility measurements and incoherent inelastic neutron scattering. The solubility measurements reveal that Orth II is more stable than Mon by 1.2 kJ/mol because of the advantage of larger entropy. The neutron scattering measurements show that the vibrational modes of Orth II shift to the lower frequencies compared with those of Mon in the frequency region below 120 cm(-1). The advantage of Orth II in vibrational entropy due to the low-frequency shifts is estimated to be 9.6 J K(-1)/mol at 288 K under the harmonic approximation, which nearly agrees with the entropy difference of 6.8 J K(-1)/mol between Mon and Orth II determined by solubility measurements. These results suggest that the difference in vibrational entropy due to low-frequency modes mainly contributes to the relative thermodynamic stabilities of polytypic structures of long-chain compounds. From the frequency of methyl torsional mode, it is suggested that the cohesive force at the lamellar interface is stronger in Mon than in Orth II.     

Ab initio molecular orbital study of the reactivity of active alkyl groups. V. Nitrosation mechanism of acetone with syn-form of methyl nitrite

The mechanisms of nitrosation of acetone through sodium enolate [CH3CO1CH2]-Na+ (1) or naked enolate [CH3CO1CH2]- (2) with methyl nitrite CH3O3NO2 (3), and the reactivity of the syn-form of 3 (syn-3) during the C-N bond formation process were investigated using ab initio molecular orbital (MO) methods. Our results have demonstrated the predominant formation of E-1-hydroxyimino-2-oxo-propane CH3COCH=NOH (4E) when the complex [CH3CO1CH2NO2(O3CH3)]-Na+ was produced kinetically via a metal-chelated pericyclic transition state (TS(CHELATED)), in which the O3 atom of syn-3 was coordinated to the Na+ atom of 1.     

Photochemical Ionic-Conductivity Switching Systems of Photochromic Crown Ethers for Information Technology

Design of two types of ion-conducting systems using photochromic crown ethers as the photocontrol agents is described; one type is based on the phase transition of azobenzene derivatives induced by their photoisomerization and the other based on the molecular control of metal ion complexation by crowned spirobenzopyrans. The photoresponsive ion-conducting systems are applicable to electrostatic imaging and photorefractive materials.