Annealing effect on performance and morphology of photovoltaic devices based on poly(3‐hexylthiophene)‐b‐poly(ethylene oxide)

Novel block copolymers, poly(3‐hexylthiophene)‐b‐poly(ethylene oxide) (P3HT‐b‐PEO) were synthesized via Suzuki coupling reaction of P3HT and PEO homopolymers. The copolymers were characterized by NMR, gel permeation chromatography, differential scanning calorimeter, and UV–vis measurements. A series of devices based on the block copolymers with a fullerene derivative were evaluated after thermal or solvent annealing. The device using P3HT‐b‐PEO showed higher efficiency than using P3HT blend after thermal annealing. Phase‐separated structures in the thin films of block copolymer blends were investigated by atomic force microscopy to clarify the relationship between morphologies constructed by annealing and the device performance. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Continuous flame oxidation in supercritical water

Abstract

Continuous flames have been observed in Supercritical water oxidation (scWO) of isopropyl alcohol (IPA), using a vertical continuous reactor with sapphire windows and a mixing nozzle. Two types of continuous flame were confirmed: the one was long pale blue colored and the other was red short cone shaped, changing blue to red at around air ratio 2.0. The flame was strongly influenced by IPA concentration, air ratio and design of the mixing nozzle. Results for decomposition of PA are presented for IPA concentrations ranging from 600 up to 28260 ppm as TOC and initial reactor temperatures, were mostly around 490°C, at 25 MPa. Decomposition rate at steady state was over 99.9%. Experimentally measured CO₂ and O₂ concentrations at the flue gas were in good agreement with theoretically calculated values. Even for low air ratio as 1.1, high decomposition rate without CO, NO, NO₂ was achieved.     

Numerical analysis of turbulent flow separation in a rectangular duct with a sharp 180‐degree turn by algebraic Reynolds stress model

Turbulent flow in a rectangular duct with a sharp 180‐degree turn is difficult to predict numerically because the flow behavior is influenced by several types of forces, including centrifugal force, pressure‐driven force, and shear stress generated by anisotropic turbulence. In particular, this type of flow is characterized by a large‐scale separated flow, and it is difficult to predict the reattachment point of a separated flow. Numerical analysis has been performed for a turbulent flow in a rectangular duct with a sharp 180‐degree turn using the algebraic Reynolds stress model. A boundary‐fitted coordinate system is introduced as a method for coordinate transformation to set the boundary conditions next to complicated shapes. The calculated results are compared with the experimental data, as measured by a laser‐Doppler anemometer, in order to examine the validity of the proposed numerical method and turbulent model. In addition, the possibility of improving the wall function method in the separated flow region is examined by replacing the log‐law velocity profile for a smooth wall with that for a rough wall. The analysis results indicated that the proposed algebraic Reynolds stress model can be used to reasonably predict the turbulent flow in a rectangular duct with a sharp 180‐degree turn. In particular, the calculated reattachment point of a separated flow, which is difficult to predict in a turbulent flow, agrees well with the experimental results. In addition, the calculation results suggest that the wall function method using the log‐law velocity profile for a rough wall over a separated flow region has some potential for improving the prediction accuracy. Copyright © 2007 John Wiley & Sons, Ltd.     

Adsorption behavior of VII group elements on tertiary pyridine resin in hydrochloric acid solution

We investigated the adsorption behaviors of technetium and rhenium on tertiary pyridine resin in hydrochloric acid solution. Technetium has a little larger distribution coefficient in higher concentration of hydrochloric acid region than rhenium. However, the tendency of adsorption behavior of technetium and rhenium is similar. We concluded that the rhenium can be used as the substitute for technetium. Adsorption behaviors of platinum group elements were also investigated. The separation of technetium from platinum group elements is discussed.     

An application of fragment interaction analysis based on local MP2

We have developed a method named ‘fragment interaction analysis based on local MP2’ (abbreviated as FILM). This method enables us to decompose the interaction energy associated with dispersion interactions into contributions of localized occupied orbitals. In this study, the basis set dependence of the results derived from FILM was examined. The results suggested that the individual ratio of pair correlation energies of selected orbital pairs to the total dispersion interaction was almost independent of the basis set size. As an illustrative example, detailed analysis was performed on the human immunodeficiency virus type 1 protease complexed with lopinavir molecule.     

Oxidative degradation of poly(isophthaloylhydrazine‐1,2‐diyl)s

The condensation polymerization of isophthalodihydrazide and diphenyl isophthalate affords poly(isophthaloylhydrazine‐1,2‐diyl). High‐molecular‐weight poly(5‐tert‐butylisophthaloylhydrazine‐1,2‐diyl) is prepared by the polycondensation of 5‐tert‐butylisophthalodihydrazide and bis(4‐nitrophenyl) 5‐tert‐butylisophthalate in NMP at 100 °C. T_d of the poly(diacylhydrazine) is observed above 300 °C. No T_g is observed below T_d. The high‐molecular‐weight poly(diacylhydrazine) exhibits a film‐forming ability. The poly(diacylhydrazine) decomposes on treatment with an oxidant such as sodium hypochlorite solution to obtain the corresponding carboxylic acid and nitrogen. However, poly(diacylhydrazine) was stable to oxygen and hydrogen peroxide even in the presence of transition metal ions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6255–6262, 2008     

An Accurate Characterization of CRT Monitor (I) Verifications of Past Studies and Clarifications of Gamma

CRT monitors are widely used to view images on the Internet. The color images on the computer graphic display can be printed out or displayed on other monitors through the Internet, and color matching between the original and the reproduction is very important. The color management systems (CMSs) are useful for the color matching. CMSs utilize device profiles, in which color characteristic information is stored, and these profiles are generated by device characterization. Thus, an accurate characterization of the monitor is essential for better color matching. CRT monitor characteristics can be described by the tone reproduction curves (TRCs) of each channel, and color additive matrix. In this paper, these characteristics were investigated from a physical point of view. Various kinds of flare and the interdependence among the channels were also investigated and verified. The definition of the term “gamma” is clarified, which is very often used to describe the TRC. Various definitions are compared and a new definition of S-γ is proposed.     

Estimating the covariance matrix and the generalized variance under a symmetric loss

For estimating the power of a generalized variance under a multivariate normal distribution with unknown means, the inadmissibility of the best affine equivariant estimator relative to the symmetric loss is shown, and a class of improved estimators is given. The problem of estimating the covariance matrix is also discussed.