A novel synthesis of (E)-3,7-dimethyl-2-octene-1,8-diol secreted by the african monarch using the ring-opening reaction of α-methyl-β-propiolactone

The regioselective ring-opening reaction of α-methyl-β-propiolactone with 3,3-ethylene-dioxybutylmagnesium bromide in the presence of copper(I) catalyst afforded 2-methyl-6-oxoheptanoic acid, which was easily converted into (E)-3,7-dimethyl-2-2-octene-1,8-diol in good yield.     

Preparation of Na+-selective electrodes by ion-implantation of lithium and silicon into single-crystal alumina wafer and its application to the production of ISFET

Summary Sodium ion-selective electrodes (Na⁺-ISE) were prepared by implanting Si⁺ and Li⁺ into alumina wafers and their characteristics were investigated. The alumina wafer had a thickness of 100 m and a diameter of 1.40 cm. The ionselective membrane was produced by ion-implanting of Li⁺ and Si⁺ on both sides of a single-crystal alumina wafer. The total doses of Li⁺ and Si⁺ were controlled to be the same, viz. 10¹³–10¹⁵ ions/cm². The ion-implanted alumina wafer with 10¹⁴ or 4×10¹⁴ ions/cm² of Li⁺ and Si⁺ showed better characteristics than the others.The response curves of the 10¹⁴ ions/cm² implanted alumina wafer had a slope of 42 mV/pNa in a concentration range from 1–10^–4mol/l. The full response achieved after about 1 min was reproducible. The proposed idea of producing Na⁺-ISE by ion-implantation technique was applied to functuate the gate surface of the field effect transitor to sodium ion. The sodium ion-sensitive FET (Na⁺-ISFET) prepared by implanting Li⁺ and Al⁺ at a dose of 5×10¹⁴ ions/cm² showed a slope of 30 mV/pNa in a concentration range from 1–10^–4mol/l.

---

Herstellung Na⁺-ionenselektiver Elektroden durch Einbau von Lithium und Silicium in Einkristall-Alumniumoxidblättchen und Anwendung zur Erzeugung von ISFET

Zusammenfassung Na⁺-selektive Elektroden wurden durch Einbau von Si⁺ und Li⁺ in Aluminiumoxidblättchen hergestellt und ihre Charakteristiken untersucht. Die Blättchen hatten eine Dicke von 100 m und einen Durchmesser von 1,40 cm. Ebenso wurde die Membran für einen ISFET hergestellt. Die Gesamtmenge von Li⁺ und Si⁺ wurde auf 10¹³–10¹⁵ Ionen/cm² eingestellt, wobei sich bei 10¹⁴ oder 4×10¹⁴ Ionen/cm² die beste Charakteristik ergab.Die Responsekurven der mit 10¹⁴ Ionen/cm² versehenen Aluminiumoxidplättchen hatten eine Neigung von 42 mV/pNa in einem Konzentrationsbereich von 1–10^–4mol/l. Der nach 1 min erhaltene volle Response war reproduzierbar. Die vorgeschlagene Technik wurde zur Einstellung der Gate-Oberfläche des Feldeffekt-Transistors auf Natriumion benutzt. Der Na⁺-sensitive FET (Na⁺-ISFET), der durch Einbau von Li⁺ und Al⁺ mit 5×10¹⁴ Ionen/cm² hergestellt wurde, zeigte eine Neigung der Signalkurve von 30 mV/pNa in einem Bereich von 1–10^–4mol/l.

     

QUANTUM EFFICIENCY FOR THE PHOTOCONVERSION OF BACTERIORHODOPSIN AT VERY LOW TEMPERATURES

Abstract— Quantum efficiencies for photoconversion of bacteriorhodopsin (trans-bR) to a bathochromic product (batho-bR^t) and its photoreversion in purple membrane at 77 and 9 K were investigated with low temperature spectrophotometry. The kinetics of the photoconversion and its photoreversion cannot be expressed by a single exponential curve. The photoconversions at 77 and 9 K showed the same slope in the early stage. The kinetics of the photoreversions were identical at the two temperatures. These results indicate that the quantum efficiencies for the conversion of trans-bR to batho-bR^t or for its photoreversion are identical at the two temperatures.
The fact that the photoreversion cannot be expressed by a single exponential curve suggests the existence of several conformational states of batho-bR^t due to the trimer structure of the purple membrane.     

Transverse vibration of clamped trapezoidal plates having rectangular orthotropy

This paper deals with the free transverse vibration of orthotropic trapezoidal plates clamped at the edges. A series-type method is applied for obtaining an analytical solution of the problem, and the resulting frequency equation is presented for symmetric trapezoids. In the numerical study, accurate frequency parameters and mode shapes of the plates are calculated for the first several modes, and the effects of the orthotropy are discussed.     

A simple monitoring system for single subpicosecond laser pulses using an SH spatial autocorrelation method and a CCD image sensor

A simple noncollinear SHG autocorrelator for monitoring the time behavior of single subpicosecond laser pulses is described. A new CCD image-line sensor with high sensitivity in the UV range is used to measure the second-harmonic (SH) spatial distribution which gives information on the duration of the fundamental light pulses. An input energy of only 10 μJ is enough to obtain the SH spatial beam patterns in this highly sensitive autocorrelation system.     

Polarization dependence of the optical absorption of single-walled carbon nanotubes

Anisotropic optical absorption properties of single-walled carbon nanotubes (SWNTs) are determined from a vertically aligned SWNT film for 0.5-6 eV. Absorption peaks at 4.5 and 5.25 eV are found to exhibit remarkable polarization dependence and have relevance to optical properties of graphite. A method for determining a nematic order parameter for an aligned SWNT film based on the collinear absorption peak at 4.5 eV is presented, followed by the determination of the optical absorption cross section.     

Thermal splitting of Bis-Cu(II) octaphyrin(1.1.1.1.1.1.1.1) into two Cu(II) porphyrins

When heated, bis-Cu(II) octaphyrin(1.1.1.1.1.1.1.1) is quantitatively split into two Cu(II) porphyrins both in solution and film states, which is accompanied by large absorption spectral changes.     

Total synthesis of ingenol

A total synthesis of the biologically important diterpene ingenol has been completed. Ring-closing olefin metathesis was used to construct the strained "inside-outside" tetracyclic skeleton, and a series of diastereoselective reactions were employed to complete the synthesis. Another naturally occurring ingenane, 20-deoxyingenol, has also been prepared.