Microcalorimetric study of protein adsorption onto calcium hydroxyapatites

To clarify the adsorption mechanism of proteins onto calcium hydroxyapatite (Hap), the present study measured adsorption (DeltaHads) and desorption (DeltaHdes) enthalpies of bovine serum albumin (BSA; isoelectric point (iep) 4.7, molecular mass (Ms) 67,200 Da, acidic protein), myoglobin (MGB; iep=7.0, Ms=17,800 Da, neutral protein), and lysozyme (LSZ; iep=11.1, Ms=14,600 Da, basic protein) onto Hap by a flow microcalorimeter (FMC). Five kinds of large platelike particles of CaHPO4.2H2O (DCPD) after hydrolyzing at room temperature with different concentrations of NaOH aqueous solution ([NaOH]) for 1 h were used. DCPD converted completely to Hap after treatment at [NaOH]>or=2%, and the crystallinity of Hap was increased with an increase in [NaOH] up to 10%. The amounts of protein adsorbed (Deltanads) and desorbed (Deltandes) were measured simultaneously by monitoring the protein concentration downstream from the FMC with a UV detector. The Deltanads values were also measured statically by a batch method in each system. The Deltanads values measured by the FMC and static measurements fairly agreed with each other. Results revealed that DeltaHBSAads was decreased with an increase in [NaOH]; in other words, DeltaHBSAads was decreased with the improvement of Hap's crystallinity, suggesting that the BSA adsorption readily proceeded onto Hap. This fact indicated a high affinity of Hap to protein. This affinity was further recognized by DeltaHBSAdes because its positive value was increased by increasing [NaOH]. These opposite tendencies in DeltaHBSAads and DeltaHBSAdes revealed that Hap possessed a high adsorption affinity to BSA (i.e., enthalpy facilitated protein adsorption but hindered its desorption). The fraction of BSA desorption was also decreased with an increase in [NaOH], confirming the high affinity of Hap to protein. Similar results were observed on the LSZ system, though the enthalpy values were smaller than those of BSA. In the case of neutral MGB, DeltaHBSAads also exhibited results similar to those of the BSA and LSZ systems. However, due to its weak adsorption by the van der Waals force, DeltaHBSAdes was small and almost zero at [NaOH]>or=2%. Hence, the fraction of MGB desorption was less dependent on [NaOH].     

Protein adsorption characteristics of calcium hydroxyapatites modified with pyrophosphoric acids

Protein adsorption characteristics of calcium hydroxyapatite (Hap) modified with pyrophosphoric acids (PP(a)) were examined. The PP(a) modified Hap particles (abbreviated as PP-Hap) possessed anchored polyphosphate (PP: P-{O-PO(OH)}(n)-OH) branches on their surfaces. The proteins of bovine serum albumin (BSA: isoelectric point (iep)=4.7, molecular mass (M(s))=67,200 Da, acidic protein), myoglobin (MGB: iep=7.0, M(s)=17,800 Da, neutral protein), and lysozyme (LSZ: iep=11.1, M(s)=14,600 Da, basic protein) were examined. The zeta potential (zp) of PP-Hap particles as a function of pH overlapped; zp-pH curves were independent of the concentration of pyrophosphoric acids (abbreviated as [PP(a)]) used for modifying Hap surface. The saturated amounts of adsorbed BSA (Delta n(ads)(BSA)) were increased three-fold by the surface modification with PP(a) though they were independent of the [PP(a)]. Furthermore, the fraction of BSA desorption was independent of the [PP(a)]. This enhancement of BSA adsorption onto the PP-Hap is due to the hydrogen bonding between oxygen and OH groups of the PP-branches and functional groups of BSA molecules. In the case of LSZ, a more higher adsorption enhancement was observed; the saturated amount of adsorbed LSZ (Delta n(ads)(LSZ)) for Hap modified at [PP(a)]=6 mmol/dm(3) was nine-fold than that for Hap unmodified. This remarkable adsorption enhancement was explained by a three-dimensional binding mechanism; LSZ molecules were trapped inside of the PP-branches. Hence, a fraction of LSZ desorption was decreased with an increase in the [PP(a)]; as more PP-branches are presented on the surface the higher retardation of LSZ desorption was induced. It was expected from their small size that MGB adsorb between the PP-branches as well as LSZ. However, the amounts of adsorbed MGB (Delta n(ads)(MGB)) did not vary and were independent of the [PP(a)] due to the small numbers of functional groups of MGB. In addition, no dependence of the fraction of MGB desorption on the [PP(a)] was observed. The results of zp for all the protein systems supported the mode of protein adsorption discussed. The anchored structure of the PP-branches developed on the Hap surface to provide three-dimensional protein adsorption spaces was proved by a comparative experiment that was elucidating the effect of pyrophosphate ions for BSA adsorption onto Hap.     

PREPARATION OF PHOTOFUNCTIONAL POLYMER THIN FILMS BY LANGMUIR-BLODGETT TECHNIQUE

Polymer LB films containing photofuntional groups were prepared by the copolymerization of N-dodecylacrylamide (DDA), which has an excellent property to form a stable monolayer and LB multilayerswith photofunctional monomers. Tris(2, 2'-bipyridine) ruthenium complex, Ru(bpy)_3~(2+), one of the most well-known redox-active sensitizer, was incorporated into the DDA copolymer. The photogalvanic effect based onthe photoinduced electron transfer using the ruthenium complex in the polymer LB monolayer was discussed.     

Polymerization of N-carbazolylacetylene by various transition metal catalysts and polymer properties

N-Carbazolylacetylene (CzA) was polymerized in the presence of various transition metal catalysts including WCl₆, MoCl₅, [Rh(NBD)Cl]₂, and Fe(acac)₃ to give polymers in good yields. The polymers produced with W catalysts were dark purple solids and soluble in organic solvents such as toluene, chloroform, etc. The highest weight-average molecular weight of poly(CzA) reached about 4 × 10⁴. In the UV–visible spectrum in CHCl₃, poly(CzA) exhibited an absorption maximum around 550 nm (ε_max = 4.0 × 10³ M⁻¹ cm⁻¹) and the cutoff wavelength was 740 nm, showing a large red shift compared with that of poly(phenylacetylene) [poly(PA)]. Poly(CzA) began to lose weight in TGA under air at 310°C, being thermally more stable than poly(PA) and poly[3-(N-carbazolyl)-1-propyne]. Poly(CzA) showed a third-order susceptibility of 18 × 10⁻¹² esu, which was 2 orders larger than that of poly(PA). © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2489–2492, 1998     

A study on ac and dc conductivity characteristics of Y-doped BaCeO3 modified by Ar+ ion beam

The effects of surface modification on electrical characteristics in bulk, grain boundary and interface (electrolyte/electrode) of BaCe_0.9Y_0.1O_3-δ were investigated. The surface modification was performed by means of two processes: specimen was firstly irradiated by 10 keV Ar⁺ ion with dose of 1 × 10¹⁸ ions/cm² and then exposed to air. The modified surface was investigated by elastic recoil detection analysis (ERDA) for quantitative analysis of hydrogen concentration on the surface and alternating current (AC) and direct current (DC) conductivity measurements, respectively. The ERDA results showed that hydrogen concentration and reaction rate on the modified surface increased. The increase of hydrogen concentration was explained in terms of the increase of proton due to interaction between oxygen vacancy formed by modification and H₂O. In AC and DC electrical conductivity measurements, it concluded that the proton and electronic carrier generated on the surface by modification attributed to the increase of bulk, grain boundary and interface conductivity.     

Surface modification of polymer latex particles by AGET ATRP of a styrene derivative bearing a lactose residue

Grafting of a styrene derivative bearing a lactose residue, i.e., N-2-4-(vinylbenzenesulfonamido)ethyl lactobionamide (VBSAELA), onto polymer latex particles was carried out in aqueous media by activator generated electron transfer atom transfer radical polymerization (AGET ATRP). The core polymer latex particles having α-chloroester groups as ATRP-initiating groups were prepared by miniemulsion polymerization of styrene and 2-chloropropionyloxyethyl methacrylate (CPEM) in the presence of a polymerizable surfactant, i.e., N,N-dimethyl-N-dodecyl-N-2-methacryloyloxyethylammonium bromide (C₁₂Br). AGET ATRP was initiated with tris[(2-pyridylmethyl)amine] copper (II) dichloride and l-ascorbic acid. Dynamic light scattering (DLS) revealed that the P(St-CPEM)-g-P(VBSAELA) particles possess graft layers of 10 nm in thickness on the core particles of 91 nm in diameter. Critical coagulation concentration measurement revealed that the dispersion stability of the particles in water increased due to hydrated P(VBSAELA) shell layers. Adsorption of bovine serum albumin (BSA) onto the particles was considerably suppressed by the hydrated shell layers.     

Synthesis and application of a peroxidase-like molecularly imprinted polymer based on hemin for selective determination of serotonin in blood serum

This work reports the preparation of a molecularly imprinted polymer (MIP) for selective catalytic detection of serotonin (5-hydroxytryptamine, 5-HT). The process is based on the synthesis of polymers with hemin introduced as the catalytic center to mimic the active site of peroxidase. The copolymer MIP, containing artificial recognition sites for 5-HT, has been prepared by bulk polymerization using methacrylic acid (MAA) and hemin as the functional monomers, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. For the determination of 5-HT, a flow injection analysis system coupled to an amperometric detector was optimized using multivariate analysis. The effects of different parameters, such as pH, buffer flow rate, buffer nature, peroxide concentration and sample volume were evaluated. After optimizing the experimental conditions, a linear response range from 1.0 up to 1000.0 μmol L⁻¹ was obtained with a sensitivity of 0.4 nA/μmol L⁻¹. The detection limit was found to be 0.30 μmol L⁻¹, while the precision values (n = 6) evaluated by relative standard deviation (R.S.D.) were, respectively, 1.3 and 1.7% for solutions of 50 and 750 μmol L⁻¹ of 5-HT. No interference was observed by structurally similar compounds (including epinephrine, dopamine and norepinephrine), thus validating the good performance of the imprinted polymer. The method was applied for the determination of 5-HT in spiked blood serum samples.     

Modified Carbon Paste Electrode for Kinetic Investigation and Simultaneous Determination of Ascorbic and Uric Acids

The present work explores, for the first time, the electrocatalytic oxidation of ascorbic acid (AscH₂) and its determination in the presence of uric acid (UA) on the in situ activated 4‐nitrophthalonitrile modified carbon paste electrode. The kinetic constant κ for the catalytic reaction for the electrocatalytic oxidation of ascorbic acid, evaluated by cyclic voltammetry, chronoamperometry and RDE voltammetry provided values around 10⁶ L mol^?1 s^?1. The sensor provided a linear response range for AscH₂ and UA from 5.0 up to 120.0 μmol L^?1 with detection limits of 1.6 μmol L^?1and 1.3 μmol L^?1, respectively. The sensor was applied for the simultaneous determination of AscH₂ and UA in urine samples and the average recoveries for these samples were 99.8 (±3.1)% and 99.9 (±2.1)%, respectively .