Kinetics and mechanism of glycolide and ethylenoxalate copolymerization. Characteristics of the copolymers formed and mechanism of the biodegradation

The study of glycolide (GL) and ethylenoxalate (EO) copolymerization with the use of SnCl₂ 2 H₂O as a catalyst was carried out by ¹H NMR spectroscopy. Monomer reactivities are found to be close and equal to 1,1 and 1,11 for GL and 0,71 and 0,85 for EO at 150 and 170 °C, respectively. Kinetic data obtained show that the reaction proceeds without induction period up to entire consumption of every monomer. The detailed identification of ¹H spectra enables to follow the polymer microstructure in the course of copolymerization. Thermal properties of copolymers and their biodegradation abilities have been studied. The biodegradation rate is shown to increase with growing EO proportion in the copolymer. The lactone biodegradation mechanism where the electrophility of carbon and nucleophility of OH group are playing the most important role, is suggested. The correlation between the biodegradation rate and the chemical shift in ¹³C NMR spectra of the carbon atom of the carbonyl group has been established.     

CE separation of various analytes of biological origin using polyether ether ketone capillaries and contactless conductivity detection

The development of efficient and sensitive analytical methods for the separation, identification and quantification of complex biological samples is continuously a topic of high interest in biological science. In the present study, the possibility of using a polyether ether ketone (PEEK) capillary for the CE separation of peptides, proteins and other biological samples was examined. The performance of the tubing was compared with that of traditional silica capillaries. The CE analysis was performed using contactless conductivity detection (C⁴D), which eliminated any need for the detection window and was suitable for the detection of optically inactive compounds. In the PEEK capillary the cathodic EOF was low and of excellent stability even at extremes pH. In view of this fast biological anions were analyzed using an opposite end injection technique without compromising separation. A comparison of the performances of fused‐silica and polymer capillaries during the separation of model sample mixtures demonstrated the efficiency and separation resolution of the latter to be higher and the reproducibility of the migration times and peak areas is better. Furthermore, PEEK capillaries allowed using simple experimental conditions without any complicated modification of the capillary surface or use of an intricate buffer composition. The PEEK capillaries are considered as an attractive alternative to the traditional fused‐silica capillaries and may be used for the analysis of complex biological mixtures as well as for developing portable devices.     

Speciation of Rare‐Earth Metal Complexes in Ionic Liquids: A Multiple‐Technique Approach

The dissolution process of metal complexes in ionic liquids was investigated by a multiple‐technique approach to reveal the solvate species of the metal in solution. The task‐specific ionic liquid betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf₂N]) is able to dissolve stoichiometric amounts of the oxides of the rare‐earth elements. The crystal structures of the compounds [Eu₂(bet)₈(H₂O)₄][Tf₂N]₆, [Eu₂(bet)₈(H₂O)₂][Tf₂N]₆?2H₂O, and [Y₂(bet)₆(H₂O)₄][Tf₂N]₆ were found to consist of dimers. These rare‐earth complexes are well soluble in the ionic liquids [Hbet][Tf₂N] and [C₄mim][Tf₂N] (C₄mim=1‐butyl‐3‐methylimidazolium). The speciation of the metal complexes after dissolution in these ionic liquids was investigated by luminescence spectroscopy, ¹H, ¹³C, and ⁸⁹Y NMR spectroscopy, and by the synchrotron techniques EXAFS (extended X‐ray absorption fine structure) and HEXS (high‐energy X‐ray scattering). The combination of these complementary analytical techniques reveals that the cationic dimers decompose into monomers after dissolution of the complexes in the ionic liquids. Deeper insight into the solution processes of metal compounds is desirable for applications of ionic liquids in the field of electrochemistry, catalysis, and materials chemistry.     

Diffusion rate of polyethylene glycol into cell walls of red pine following vacuum impregnation

Rates of penetration of polyethylene glycol (PEG) molecular weight (MW) 1,000, 2,000, and 4,000 from 30% aqueous solutions into hydrated cell walls of red pine samples following vacuum impregnation were estimated by examining retained swelling of the samples after different post-treatment conditioning times. To model PEG diffusion into wood cell walls, a hollow cylinder diffusion model was developed and diffusion coefficients were estimated and compared to those determined with a plane membrane diffusion model. The models gave similar results. The diffusion coefficient of PEG MW 1,000 at room temperature was estimated to be in the order of 10⁻¹³ m²/s, while the penetration rates of both PEG 2,000 and 4,000 were about an order lower. These findings indicate that treatments of wood by PEG can be significantly shorter than present practices of soaking green samples in solution if the samples are vacuum/pressure impregnated with PEG solution.     

Extended resonant feedback technique for controlling unstable periodic orbits of chaotic system

An improvement of the recently described resonant chaos control method is suggested. Negative feedback loop containing a notch-rejection filter, tuned to the main harmonic of the unstable periodic orbit, is supplemented with a set of notch filters tuned to the higher harmonics. The extended method is applied to an electrical circuit representing the Duffing–Holmes type non-autonomous two-well chaotic oscillator. Stabilization of the period-1 orbit is achieved with very small control force. The residual control signal is about 1% compared to the main variable. Mathematical model based on a two-well piecewise parabolic potential is presented and numerical simulation is performed. Numerical results are confirmed by hardware experiments.     

Rapid online equilibration method to determine the D/H ratios of non-exchangeable hydrogen in cellulose

An improved method for the determination of deuterium-to-hydrogen (D/H) ratios of non-exchangeable hydrogen in cellulose is presented. The method is based on the equilibration reaction of the hydroxyl hydrogen of cellulose and water vapour of known isotopic composition. The equilibrated cellulose is pyrolysed and the total D/H ratio determined by subsequent online isotope ratio mass spectrometry (IRMS). With a mass balance system the D/H ratio of non-exchangeable hydrogen is recalculated after an empirical calibration has been performed, yielding a mean exchangeability of 0.239 and an equilibrium fractionation factor of 1.082 between the hydroxyl hydrogen of cellulose and water hydrogen at 110 degrees C. Equilibration takes 10 min per sample. Results obtained by this online equilibration method agree very well with values obtained by the nitration technique (R2 = 0.941). The uncertainty of the equilibration method is +/-4 per thousand resulting from a single standard deviation of +/-2.8 per thousand for the equilibration determined by standard cellulose and 2.8 per thousand from the variable exchangeability of the hydroxyl hydrogen in cellulose due to crystalline areas. The latter uncertainty may be lowered by minimising the crystallinity of the cellulose. Advantages of this new technique are (i) the considerably reduced sample amount required (as low as 0.2 mg, ideally 0.5 mg compared with 20 mg for the conventional nitration technique); (ii) an approximately 100-fold reduced process time; and (iii) no need for the hazardous chemicals used in the nitration technique.     

Microcapsules made of weak polyelectrolytes: templating and stimuli-responsive properties

Hollow microcapsules composed of the weak polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) are templated on silicon oxide particles using the layer-by-layer adsorption. The colloidal template is removed with a buffer system of hydrofluoric acid and ammonium fluoride. With this buffer system, the template can be dissolved in mild pH conditions, where the polymeric layers are still stable. The morphology and the thickness of the resulting capsules are investigated with atomic force microscopy. The resulting hollow capsules show pH-dependent properties. The shells are stable over a broad pH range and swell and immediately dissolve for pH values below 2.3 and above 11. If the molecular weight of the poly(methacrylic acid) is increased, the enhanced entanglement of the polymers results in a reversible swelling of the capsules at low and at high pH. The swelling degree is probed with confocal laser scanning microscopy. In addition to the pH-dependent size variations, the different ionization degree of poly(methacrylic acid) as a function of pH is used for the selective binding of calcium ions.     

Advances in femto-nano-optics: ultrafast nonlinearity of metal nanoparticles

With the recent advances of experimental techniques, the nonlinear ultrafast optical response of metal nano-objects can now be investigated both on ensembles and on single nanoparticles. Its connection with the metal electronic and lattice kinetics is studied on the basis of a model describing the wavelength and time-dependent modifications of the object material dielectric function. Its application is illustrated in the case of single silver nanospheres and gold nanorods, as well as on ensembles of noble metal nanoparticles and metal-semiconductor nano-hybrids. This quantitative analysis also permits to elucidate the physical mechanisms at the origin of ultrafast nonlinearities in confined metals at different timescales.     

Electrochemical behavior and antioxidant activity of tetradentate Schiff bases and their copper(II) complexes

This study describes the effects of the substituents on electrochemical behavior and antioxidant activity of the six tetradentate Schiff bases, containing ethane-1,2-diamine or propane-1,2-diamine as the amine part and pentane-2,4-dione and/or 1-phenylbutane-1,3-dione as ??-diketone, and corresponding copper(II) complexes. Cyclic voltammograms of these compounds were recorded in dimethylsulfoxide and 0.1?M sodium perchlorate as supporting electrolyte with glassy carbon as working electrode at different scan rates. The voltammograms of Schiff bases alone showed only one irreversible peak. Voltammograms recorded for complexes showed the presence of quasi-reversible processes taking place at the metal center and reversible process at the ligand part. Both steric and inductive effects of substituents and structure of imine bridge of Schiff base ligands as well as complexes were discussed. These effects appear relevant for the antioxidant activity. Antioxidant activity of the investigated compounds expressed as Trolox equivalent antioxidant capacity is also discussed. The electrochemical behavior showed a high correlation with the antioxidant activity for investigated compounds.